100 / 120 / 150 Watt Adjustable LED Flood Light | 10800 to 20250 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Slipfitter or Yoke Mount

Product Overview

This is an adjustable wattage LED flood light designed for exterior area illumination, security lighting, and building facade applications. The fixture supports selectable output at 100, 120, or 150 watts, providing flexibility for site-specific requirements. Typical use cases include replacing 400W metal halide flood lights on building perimeters, parking lots, and sports courts with mounting heights from 15 to 30 feet.

The fixture operates on 100-277V and offers field-selectable color temperature (3000K, 4000K, or 5000K). It is suitable for environments requiring robust, weather-resistant lighting with consistent performance in outdoor conditions.

Core Performance and Output

This flood light delivers 10,800 to 20,250 lumens depending on the selected wattage, with an efficacy of 135 lumens per watt. The output range supports medium to high illumination levels for general area lighting, security, and sports court applications. The fixture uses a tempered glass lens for uniform distribution and glare control.

Beam spread is designed for wide coverage, making it suitable for open areas and building facades. At lower mounting heights, the highest wattage setting may produce excessive brightness or glare. Uniformity may decrease at mounting heights above 30 feet due to the fixture?s optical design.

Adjustability and Control Options

Wattage can be adjusted in the field between 100W, 120W, and 150W using an onboard selector. Color temperature is also selectable between 3000K, 4000K, and 5000K to match site requirements or existing lighting. The fixture does not include dimming capability.

Mounting options include yoke and slipfitter, supporting both wall and pole installations. No integrated motion or photocell controls are provided; external controls can be added as needed.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70) and uses a powder-coated aluminum housing for corrosion resistance. The IP65 rating protects against dust and water ingress, supporting reliable operation in exposed outdoor environments.

Operating temperature range is -4°F to 140°F. The tempered glass lens and sealed housing minimize maintenance requirements and protect internal components from weather and impact.

Build Quality and Physical Characteristics

The housing is constructed from powder-coated aluminum in a bronze finish. The fixture measures 11.55 x 12.09 inches and weighs 15 lbs. The tempered glass lens provides impact resistance and optical clarity.

Mounting hardware supports both yoke and slipfitter installations. The fixture?s EPA rating is 1.2, suitable for most standard pole and wall mounting scenarios. All wiring and connections are sealed for outdoor use.

Where This Product Fits Best

This LED flood light is designed for outdoor environments requiring medium to high output area lighting. It is commonly used for perimeter security, building facade illumination, and sports court lighting. The fixture is also suitable for event venues, parking lots, and loading areas where robust, weather-resistant lighting is required.

• area lighting
• security lighting
• building facade lighting
• parking lot lighting
• basketball court lighting
• event venue lighting
• loading area lighting
• outdoor sports facility lighting

Environmental characteristics include IP65 weather resistance, operation in temperatures from -4°F to 140°F, and a sealed housing for dust and moisture protection. The fixture is suitable for exposed outdoor locations and can be installed on poles or building exteriors.

Installation and Long-Term Use

The fixture supports both yoke and slipfitter mounting, allowing installation on poles, walls, or structural supports. Typical mounting heights range from 15 to 30 feet, depending on the selected wattage and required coverage. The 1.2 EPA rating should be considered when selecting poles for wind load compliance.

All wiring is accessible for straightforward connection to 100-277V circuits. The sealed housing and tempered glass lens reduce maintenance frequency. Long-term use is supported by the fixture?s corrosion-resistant finish and robust construction.

How This Fixture Is Commonly Used

This flood light is typically installed on building perimeters, parking lot poles, or sports court structures. Mounting heights of 15 to 30 feet are common, with spacing determined by output level and site requirements. For sports courts or event venues, fixtures are often spaced to provide uniform coverage and minimize shadows.

Higher output settings can reduce the number of fixtures needed but may increase glare if not aimed or shielded properly. Layouts should account for beam spread and site geometry to achieve desired light levels and uniformity.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It meets requirements for outdoor wet location use. Power factor is 0.9 and THD is 15%. The product is eligible for utility rebates where applicable.

A 5-year warranty covers manufacturing defects and performance. All safety and certification markings are present on the fixture label.

Frequently Asked Questions

Q: What is the recommended mounting height for this flood light?

A: Typical mounting heights are 15 to 30 feet, depending on the selected wattage and application.

Q: Can the wattage and color temperature be adjusted after installation?

A: Yes, both wattage and color temperature are field-selectable using onboard controls.

Q: Is this fixture suitable for use in wet outdoor environments?

A: Yes, the fixture is IP65 rated and designed for exposed outdoor installation.

Q: Does this flood light support dimming or motion controls?

A: No, the fixture does not include dimming or integrated motion controls. External controls can be added if required.

Q: How should fixtures be spaced for area or sports court lighting?

A: Spacing depends on mounting height, output setting, and required light levels. For uniform coverage, consult site plans or photometric layouts.

Application Questions and Clarification

Q: Is this flood light appropriate for parking lot lighting?

A: Yes, it is commonly used for parking lot lighting at medium mounting heights.

Q: Can this fixture be used for building facade illumination?

A: Yes, it is suitable for building facade lighting and perimeter security applications.

Q: Is this product suitable for outdoor sports facility lighting?

A: Yes, it is used for outdoor sports courts and event venue lighting at appropriate mounting heights.

Q: What environmental conditions can this fixture withstand?

A: The fixture operates in temperatures from -4°F to 140°F and is sealed against dust and water ingress.