45 Watt Square Canopy Light | 6900 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Black Housing | Emergency Battery Backup

Product Overview

This 45 Watt Square Canopy Light is designed for low bay and canopy applications requiring reliable, uniform illumination. It delivers 6900 lumens with selectable color temperatures of 3000K, 4000K, or 5000K. The fixture operates on 100-277V and is equipped with a black die-cast aluminum housing for durability in demanding environments.

Typical installations include parking garage ceilings, covered drive-throughs, and commercial entry canopies. The fixture is suitable for mounting heights in the 8 to 15 foot range, replacing legacy 250W metal halide units with improved efficiency and lower maintenance requirements.

Core Performance and Output

This canopy light outputs 6900 lumens at 45 watts, providing 153 lumens per watt. The 90° beam angle delivers a wide, uniform distribution suitable for low bay and canopy coverage. Color temperature can be field-selected between 3000K, 4000K, and 5000K to match site requirements or visual preferences.

1-10V dimming is standard, supporting integration with occupancy sensors or lighting controls. At mounting heights below 8 feet, output may be excessive for some applications. Wider spacing or higher mounting may reduce uniformity at the outer edges of coverage.

Adjustability and Control Options

The fixture includes a field-adjustable CCT switch for 3000K, 4000K, or 5000K operation. A motion sensor option is available for occupancy-based control, supporting energy savings in intermittently used areas. 1-10V dimming is integrated for compatibility with standard low voltage control systems.

An emergency battery backup is included, providing code-compliant egress illumination during power loss. All adjustments are accessible without removing the fixture from its mounted position.

Longevity and Reliability

This canopy light is rated for 150,000 hours (L70), supporting long-term operation in commercial and industrial environments. The die-cast aluminum housing and polycarbonate lens resist impact and environmental wear.

Integrated 6kV surge protection guards against voltage spikes. The fixture is designed for continuous operation in temperatures from -4°F to 122°F, with no scheduled maintenance required beyond periodic cleaning.

Build Quality and Physical Characteristics

The fixture measures 10 inches square by 3 inches high and weighs 6 pounds. The housing is die-cast aluminum with a black finish, and the lens is polycarbonate for impact resistance. All components are sealed to IP65, supporting use in wet or damp locations.

Surface and pendant mounting options are supported. The fixture is designed for direct mounting to standard junction boxes or pendant stems, with all hardware included for typical installations.

Where This Product Fits Best

This canopy light is intended for covered exterior and semi-enclosed commercial environments where uniform, glare-controlled lighting is required. It is commonly installed in locations exposed to weather, vehicle exhaust, and frequent pedestrian or vehicular traffic.

• gas station lighting
• fueling area lighting
• parking canopy lighting
• drive-through canopy lighting
• covered walkway lighting
• loading canopy lighting
• entry canopy lighting
• commercial overhang lighting

IP65 rating supports use in wet locations. The fixture is not intended for open area high mast or sports lighting applications. Emergency battery backup and motion sensor options address code and energy requirements for commercial sites.

Installation and Long-Term Use

Surface or pendant mounting is supported, with a compact form factor for low-clearance ceilings. The fixture is compatible with standard 100-277V circuits and can be installed on new or retrofit projects. All wiring and adjustment points are accessible from below the fixture.

Routine maintenance is limited to lens cleaning and periodic inspection of mounting hardware. Emergency battery backup and motion sensor components are field-replaceable. The fixture is designed for minimal service interruptions over its rated life.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 15 feet, with fixtures spaced to provide uniform coverage across canopies or garage ceilings. Layouts are often grid-based, with spacing determined by target light levels and site geometry.

Higher output allows for wider spacing and reduced fixture count, but may increase perceived glare in low-ceiling environments. Motion sensor integration is common in parking and drive-through applications to reduce energy use during low-occupancy periods.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It includes integrated 6kV surge protection and supports operation in wet locations. The product is eligible for utility rebates where applicable.

A 5-year warranty covers all components, including the emergency battery backup and motion sensor. All safety and certification markings are present on the product label.

Frequently Asked Questions

Q: What mounting options are available for this canopy light?

A: Surface and pendant mounting are both supported. All necessary hardware is included for standard installations.

Q: Can the color temperature be changed after installation?

A: Yes, the fixture includes a field-accessible switch to select 3000K, 4000K, or 5000K at any time.

Q: Is this fixture suitable for wet locations?

A: Yes, the fixture is IP65 rated and designed for use in wet or damp environments.

Q: How does the emergency battery backup function?

A: The emergency battery backup provides code-compliant egress lighting during power outages, operating the fixture at reduced output for the required duration.

Q: What is the recommended spacing for parking garage applications?

A: Spacing typically ranges from 12 to 18 feet on center, depending on mounting height and target light levels.

Application Questions and Clarification

Q: Is this canopy light appropriate for open parking lot lighting?

A: No, this fixture is designed for covered canopies and semi-enclosed areas, not for open area or pole-mounted parking lot lighting.

Q: Can this fixture be used in a loading dock canopy?

A: Yes, the fixture is suitable for loading canopy lighting and other covered exterior applications.

Q: Does the fixture support integration with occupancy sensors?

A: Yes, a motion sensor option is available and compatible with the fixture?s 1-10V dimming controls.