30 Watt LED Decorative Post Top Light | 3610 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Optional Photocell

Product Overview

This LED area light delivers 3610 lumens at 30 watts, providing a direct replacement for 100 watt metal halide fixtures. Output is selectable between 3000K, 4000K, and 5000K color temperatures. The fixture uses a Type 5 distribution and frosted tempered glass optics.

It operates on 100V-277V input and supports 1-10V dimming. The fixture is built with a die-cast aluminum housing and finished in black. Dimensions are 11.9 inches by 11.9 inches by 26 inches.

The fixture mounts to a 3 inch pole and has an EPA rating of 1.2. Power factor is greater than 0.90 and total harmonic distortion is less than 20%.

Rated for 50,000 hours (L70), this area light is IP65 rated and carries ETL listing. A photocell is available as an accessory. No motion sensor is included.

Where This Product Fits Best

This fixture is designed for outdoor area lighting where a 100 watt metal halide replacement is needed. It is suitable for parking lots, walkways, and general site lighting where a Type 5 distribution is preferred.

With an IP65 rating, the fixture can be used in environments exposed to rain, dust, and other outdoor conditions. The die-cast aluminum housing supports long-term use in commercial and industrial settings.

Color temperature adjustability allows adaptation to site-specific requirements or user preference. The 3 inch pole mount is compatible with standard area lighting poles.

Performance and Functional Considerations

The fixture delivers 120 lumens per watt, providing efficient output for its wattage class. The Type 5 distribution supplies uniform light in all directions around the pole.

1-10V dimming is supported for integration with compatible dimming controls. The power factor above 0.90 and THD below 20% support electrical system compatibility.

Color temperature can be set to 3000K, 4000K, or 5000K during installation. The frosted tempered glass lens reduces glare and diffuses light output.

The EPA rating of 1.2 should be considered when evaluating pole loading and wind exposure.

Installation and Long-Term Use

This fixture mounts directly to a 3 inch pole. The die-cast aluminum housing and tempered glass lens are designed for durability in outdoor environments.

IP65 rating allows installation in locations exposed to rain and dust. The fixture is suitable for both new installations and retrofit applications where a 100 watt metal halide is being replaced.

Color temperature adjustment is made at the fixture during installation. The available photocell accessory can be used for dusk-to-dawn operation if required.

With a rated lifespan of 50,000 hours (L70), the fixture is intended for long-term, low-maintenance operation. No motion sensor is included.

How This Fixture Is Commonly Used

After installation, you can set the color temperature to match site requirements or user preference. This is done at the fixture and does not require external controls.

The Type 5 distribution provides even coverage around the pole, supporting general area illumination. The frosted glass lens helps reduce glare for pedestrians and vehicles.

1-10V dimming allows the fixture to be integrated with compatible dimming systems if needed. The fixture operates reliably in outdoor environments due to its IP65 rating and robust construction.

If a photocell is installed, the fixture can operate automatically based on ambient light levels. Day-to-day operation is straightforward, with minimal user interaction required after commissioning.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is rebate eligible.

The fixture is rated IP65, allowing use in wet and dusty environments. The die-cast aluminum housing and tempered glass lens provide impact and weather resistance.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V input.

What is the output range?
The fixture delivers 3610 lumens at 30 watts.

What environmental conditions can this fixture handle?
The fixture is rated IP65 for wet and dusty environments.

What mounting method is supported?
This fixture mounts to a 3 inch pole.

What certifications does this fixture carry?
This fixture is ETL listed and rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.