20 / 30 / 40 / 60 Watt Adjustable LED Post Top Light | 2600 to 7800 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This LED area light offers selectable wattage settings of 20, 30, 40, or 60 watts, delivering lumen outputs from 2600 to 7800 lumens. The fixture is designed to replace 250 watt metal halide systems in outdoor or area lighting applications.

Color temperature can be set to 3000K, 4000K, or 5000K. The fixture uses a Type 5 beam distribution and frosted tempered glass optics. It is built with a die-cast aluminum housing and finished in black.

The fixture is compatible with 100V-277V input and operates at 50-60Hz. It supports 1-10V dimming and includes a photocell. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.

Dimensions are 25.6 inches high by 17 inches in diameter. The fixture mounts to a 3 inch pole and has an EPA rating of 1.75.

Where This Product Fits Best

This fixture is suited for outdoor area lighting where pole mounting is required. Typical applications include parking lots, drive lanes, perimeter areas, and general site lighting.

The selectable wattage and color temperature allow adaptation to a range of site conditions and lighting requirements. The Type 5 distribution is intended for uniform coverage in open areas.

With an IP65 rating, the fixture is suitable for environments exposed to rain, dust, and outdoor weather. The die-cast aluminum housing provides durability in commercial and industrial settings.

Use this fixture where replacement of 250 watt metal halide systems is needed and where 100V-277V power is available.

Performance and Functional Considerations

The fixture delivers up to 130 lumens per watt, supporting energy-efficient operation. Lumen output and wattage can be adjusted on site to match lighting needs or energy targets.

Color temperature can be set to 3000K, 4000K, or 5000K, allowing for warm, neutral, or cool white light as required by the application. The 80+ CRI supports accurate color rendering in outdoor environments.

The Type 5 beam angle provides symmetrical light distribution, suitable for open areas where even coverage is needed. The frosted tempered glass helps reduce glare and improve visual comfort.

The fixture includes a photocell for dusk-to-dawn operation. 1-10V dimming is supported for integration with compatible controls.

Installation and Long-Term Use

This fixture mounts to a 3 inch pole using standard hardware. The EPA rating of 1.75 should be considered when evaluating pole and foundation requirements for wind loading.

The die-cast aluminum housing and IP65 rating allow for installation in outdoor locations exposed to rain, dust, and debris. The fixture is designed for long-term use with a rated lifespan of 50,000 L70 hours.

Power input is compatible with 100V-277V systems at 50-60Hz. The fixture operates with a power factor above 0.90 and total harmonic distortion below 20%.

Routine maintenance is minimized due to the sealed construction and durable materials. The frosted tempered glass lens can be cleaned as needed to maintain light output.

How This Fixture Is Commonly Used

After installation, you can set the wattage and color temperature to match site requirements. This allows for adjustments if lighting needs change or if different areas require different light levels or color appearance.

The photocell enables automatic dusk-to-dawn operation, so the fixture turns on and off based on ambient light. This reduces manual intervention and supports consistent site lighting.

The Type 5 distribution provides even illumination in open areas, making it suitable for parking lots or large outdoor spaces where uniformity is important. The frosted glass reduces glare for drivers and pedestrians.

Once installed, the fixture requires minimal attention beyond periodic cleaning of the lens and visual inspection of the housing and mounting hardware.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is rebate eligible.

The housing is rated IP65, allowing use in wet and dusty outdoor environments. The die-cast aluminum construction supports impact and weather resistance.

LED Lighting Supply provides a 5 year warranty on this fixture.

The EPA rating of 1.75 should be used when assessing pole and mounting suitability for wind conditions.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V input.

What is the maximum lumen output?
Maximum output is 7800 lumens at the highest wattage setting.

What environmental rating does the fixture carry?
The fixture is rated IP65 for outdoor use.

What mounting method is supported?
This fixture mounts to a 3 inch pole.

What certifications does this fixture have?
This fixture is ETL listed and rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.