150 Watt LED Pole Light | 19500 Lumens | 5000K | 100-277V | Type 5

Product Overview

This 150 watt LED pole light delivers 19,500 lumens at 5000K color temperature with a Type 5 distribution pattern. The fixture operates on 100-277V input and replaces 400 watt metal halide fixtures in parking lot, pathway, and area lighting applications.

The die-cast aluminum housing is finished in bronze and carries an IP65 rating. A polycarbonate lens protects the LED array while maintaining optical performance. The fixture measures 22 x 18 x 22 inches and weighs 28 pounds.

Rated lifespan is 50,000 hours at L70, with 1-10V dimming capability built in. CRI is 70+ and efficacy is 130 lumens per watt.

Where This Product Fits Best

The Type 5 beam angle produces a square, symmetrical distribution intended for area lighting where the fixture is mounted at or near the center of the coverage zone. This pattern works well for parking areas, loading zones, and open lots where light needs to spread evenly in all directions from the pole.

At 19,500 lumens, this fixture is appropriate for replacing 400 watt metal halide pole lights in commercial and industrial outdoor spaces. The 100-277V input range accommodates standard commercial electrical systems without requiring voltage-specific fixtures.

The IP65 rating allows installation in outdoor environments exposed to rain, dust, and debris. The bronze finish suits applications where aesthetic compatibility with surrounding architecture or landscape is a consideration.

Performance and Functional Considerations

The 5000K color temperature produces a bright, neutral white output that supports visual clarity and color recognition in outdoor areas. CRI of 70+ is standard for area and parking lot lighting where general visibility is the priority rather than color-critical tasks.

Power factor exceeds 0.90 and total harmonic distortion is below 20%, which meets typical utility and facility electrical standards. Operating frequency is 50-60Hz for compatibility with both domestic and international electrical systems.

The 1-10V dimming input allows integration with external dimming controls or building management systems where lighting level adjustment is required. This is a passive input and requires a separate 1-10V signal source.

Installation and Long-Term Use

The fixture mounts to a 2-3/8 inch diameter pole using the integrated slip fitter. This is a standard pole tenon size used across commercial and municipal lighting infrastructure. Confirm pole tenon diameter before ordering.

At 28 pounds, the fixture requires secure mounting hardware and may require two people for safe handling during installation. The die-cast aluminum housing is built for long-term outdoor exposure, and the IP65 rating allows the fixture to remain in service through rain, snow, and dust without requiring supplemental enclosures.

Rated lifespan of 50,000 hours at L70 means the fixture will retain at least 70% of initial lumen output at that point. For facilities operating lights 12 hours per night, this equates to over 11 years of service before output drops below that threshold.

How This Fixture Is Commonly Used

Once installed, this fixture operates as a direct replacement for legacy 400 watt metal halide pole lights. The Type 5 distribution spreads light outward in all directions from the pole, so it is typically used where a single fixture needs to illuminate a surrounding area rather than throw light in one direction.

If 1-10V dimming is connected, output can be adjusted from a central control system or compatible dimmer. Without a dimming signal, the fixture runs at full output. Dimming is often used for scheduled setback during low-traffic hours or for energy management compliance.

The bronze housing blends into commercial and institutional settings where fixture appearance is visible from ground level. Maintenance is minimal due to the sealed IP65 housing and solid-state LED source.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. We back this product with a 5-year warranty.

The IP65 rating means the fixture is protected against dust ingress and low-pressure water jets from any direction. It can be installed in exposed outdoor locations without additional weatherproofing.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100-277V input and automatically adjusts to the supply voltage within that range.

What pole size does this fit?
The slip fitter accepts a 2-3/8 inch diameter pole tenon.

Is this fixture eligible for utility rebates?
Yes, this fixture is rebate eligible. Check with your local utility for program requirements and rebate amounts.

What is the warranty coverage?
We provide a 5-year warranty on this fixture.

Can this fixture be dimmed?
Yes, the fixture includes a 1-10V dimming input for use with compatible external controls.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.