80 / 100 / 120 Watt LED Decorative Post Top Light | 9600 to 14400 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This LED area light provides selectable wattage options of 80, 100, or 120 watts, delivering lumen outputs of 9600, 12000, or 14400 respectively. It is designed to replace 400 watt metal halide fixtures in outdoor or large-area applications.

The fixture supports color temperature adjustment between 3000K, 4000K, and 5000K. It operates on 100V-277V input and is compatible with 50-60Hz electrical systems.

The housing is constructed from die-cast aluminum with a black finish. The fixture uses frosted tempered glass optics and is rated for 50,000 hours (L70).

Standard mounting is for a 3 inch pole. The EPA rating is 1.2. The fixture supports 1-10V dimming and has a power factor greater than 0.90 with THD less than 20%.

Where This Product Fits Best

This fixture is suited for outdoor area lighting where replacement of 400 watt metal halide systems is required. It is appropriate for parking lots, drive lanes, perimeter lighting, and similar exterior applications.

The IP65 rating allows use in environments exposed to rain, dust, and outdoor weather conditions. The die-cast aluminum housing and tempered glass lens support long-term durability in these settings.

Selectable wattage and color temperature make this fixture adaptable to a range of site requirements and lighting preferences. The Type 5 distribution is suitable for open areas needing uniform coverage.

Mounting is designed for standard 3 inch poles, which are common in commercial and industrial exterior lighting layouts.

Performance and Functional Considerations

The fixture delivers 120 lumens per watt, providing efficient output for area lighting. The selectable wattage feature allows adjustment of light levels to match site needs or energy targets.

Color temperature can be set to 3000K, 4000K, or 5000K, supporting different visual environments or compliance with local requirements. The CRI is 70+.

1-10V dimming is supported for integration with compatible dimming controls. The power factor is above 0.90 and THD is below 20%, supporting stable operation on commercial electrical systems.

The EPA rating of 1.2 should be considered when evaluating pole loading and wind exposure. The fixture dimensions are 11.9 inches by 11.9 inches by 26 inches.

Installation and Long-Term Use

This fixture mounts to a 3 inch pole using standard hardware. The die-cast aluminum housing and tempered glass lens are designed for outdoor installation and long-term exposure.

The IP65 rating means the fixture can be installed in locations exposed to rain, dust, and other outdoor elements. No additional enclosure is required for weather protection.

Selectable wattage and color temperature are set at installation, allowing adjustment to site-specific requirements. The fixture is designed for minimal maintenance over its rated 50,000 hour lifespan.

Routine inspection for debris or buildup on the lens is recommended to maintain light output. The black finish provides a neutral appearance for most exterior environments.

How This Fixture Is Commonly Used

After installation, you can set the wattage and color temperature to match the lighting needs of the area. This allows you to adjust light levels or color appearance without changing the fixture.

The Type 5 distribution provides even coverage in open areas, so you can rely on consistent illumination across parking lots or large exterior spaces.

Once installed, the fixture operates with minimal attention. Dimming can be managed through compatible 1-10V controls if needed for energy management or scheduling.

The IP65 rating means you do not need to take extra steps to shield the fixture from weather. The die-cast aluminum and tempered glass construction holds up to outdoor use and routine cleaning.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is rebate eligible where applicable.

The IP65 rating allows use in wet locations and outdoor environments exposed to rain and dust.

The housing is die-cast aluminum with a tempered glass lens for impact resistance and durability.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V.

What is the wattage and lumen output range?
Selectable wattage options are 80, 100, or 120 watts. Lumen output is 9600, 12000, or 14400 lumens.

What mounting method is supported?
This fixture mounts to a 3 inch pole.

What certifications does this fixture carry?
This fixture is ETL listed and rebate eligible.

What is the environmental rating?
This fixture is rated IP65 for outdoor and wet location use.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.