80 Watt Explosion Proof 2x2 Low Profile Linear LED Light | 11200 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100-277V

Product Overview

This is an 80 watt explosion proof low profile linear LED fixture designed for hazardous locations. It delivers 11,200 lumens at 5000K with a 140 lumens per watt efficiency. The fixture is built for use in environments requiring Class 1 Division 2, Class 2 Division 1, and Class 3 protection.

The fixture operates on 100V-277V input and supports 1-10V dimming. It is designed to replace 250 watt metal halide systems in hazardous and demanding environments. The polycarbonate lens and low profile housing support a 120° beam angle.

Dimensions are 25.2 inches long, 23.8 inches wide, and 3.7 inches high. The fixture weighs 46.3 pounds. Mounting options include chain-cable, recessed, or surface installation.

The fixture is rated for 50,000 hours (L70) and is suitable for continuous operation in ambient temperatures from -22°F to 122°F.

Where This Product Fits Best

This fixture is intended for hazardous locations where explosive gases, vapors, or dusts may be present. It is suitable for facilities requiring UL 844 Hazardous Locations compliance, including Class 1 Division 2 Groups A, B, C, D; Class 2 Division 1 Groups F, G; and Class 3 environments.

Common applications include chemical processing, oil and gas, grain handling, food processing, and other industrial spaces where hazardous atmospheres are present. The low profile design allows installation in areas with limited overhead clearance.

With an IP66 rating, the fixture can be used in locations exposed to dust, water jets, or washdown conditions. The IK09 impact rating supports use in areas where fixtures may be subject to mechanical impact.

The fixture is NSF rated, supporting use in food and beverage processing environments where cleanability and non-contamination are required.

Performance and Functional Considerations

This fixture provides 11,200 lumens at 80 watts, supporting replacement of legacy 250 watt metal halide fixtures. The 5000K color temperature delivers a neutral white light suitable for task visibility in industrial settings.

The fixture operates on 100V-277V, 50-60Hz, with a power factor greater than 0.95 and total harmonic distortion below 10%. 1-10V dimming is supported for applications requiring adjustable light levels.

The polycarbonate lens and 120° beam angle provide wide, even distribution. The fixture is designed for continuous operation in ambient temperatures from -22°F to 122°F.

The housing and lens construction support IP66 ingress protection and IK09 impact resistance, allowing use in wet, dusty, or high-abuse areas.

Installation and Long-Term Use

The fixture supports chain-cable, recessed, or surface mounting. The low profile housing allows installation in spaces with limited ceiling height or where overhead obstructions are present.

At 46.3 pounds, the fixture requires secure mounting and may require two-person handling during installation. The housing dimensions should be confirmed for fit in the intended mounting location.

The fixture is rated for 50,000 hours (L70), supporting long-term use with minimal maintenance. The polycarbonate lens is designed for durability and ease of cleaning in environments where contamination or buildup may occur.

All wiring and installation should follow hazardous location requirements as defined by the applicable codes for Class 1, 2, or 3 environments.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, wide-area illumination in hazardous locations. The 1-10V dimming allows you to adjust light levels to match operational needs or shift requirements.

The fixture’s low profile design minimizes interference with overhead equipment or processes. The polycarbonate lens can be cleaned as part of routine maintenance without removing the fixture from service.

In washdown or dusty environments, the IP66 rating allows for direct cleaning with water jets or exposure to airborne particulates without risk of ingress. The IK09 rating means the fixture can withstand accidental impacts from tools or equipment.

Day-to-day, the fixture operates with minimal attention. The long rated life reduces the frequency of relamping or fixture replacement, supporting uninterrupted operation in critical areas.

Safety, Certifications, and Warranty

This fixture is UL listed for hazardous locations under UL 844. It is certified for Class 1 Division 2 Groups A, B, C, D; Class 2 Division 1 Groups F, G; and Class 3 environments.

The fixture is IP66 rated for protection against dust and water jets. It carries an IK09 impact rating for resistance to mechanical impact.

The fixture is NSF rated. It is rebate eligible. LED Lighting Supply provides a 5 year warranty.

All certifications and ratings are supported by the fixture’s construction and documented compliance.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V input.

What is the lumen output and wattage?
The fixture delivers 11,200 lumens at 80 watts.

What environmental ratings does this fixture carry?
The fixture is IP66 rated for dust and water jet protection and IK09 rated for impact resistance.

What mounting options are available?
Chain-cable, recessed, and surface mounting methods are supported.

What certifications does this fixture have?
This fixture is UL listed for hazardous locations, NSF rated, and rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.