70 Watt Round Explosion Proof LED Light | 9800 Lumens | Class 1 Div 1 | 5000K | 100-277V | Optional 10 Year Warranty

Product Overview

This 70 Watt round explosion proof LED fixture delivers 9800 lumens at 5000K. It is designed for hazardous locations requiring Class 1 Division 1, Class 1 Division 2, Class 2 Division 1, Class 2 Division 2, and Class 3 protection.

The fixture operates on 100-277V input and supports 1-10V dimming. It is built with a powder coated aluminum housing and a tempered glass lens. The standard beam angle is 120 degrees.

It is rated for 150,000 hours (L70) and replaces 250 Watt metal halide systems. The fixture is gray in color and weighs 20 lbs.

Mounting options include yoke, 3/4 inch NPT pendant, surface, or wall. The fixture does not include a cord.

Where This Product Fits Best

This fixture is suitable for hazardous environments where explosive gases, vapors, or dusts are present. It meets requirements for Class 1 Division 1, Group B, C, D; Class 1 Division 2, Group B, C, D; Class 2 Division 1, Groups E, F, G; Class 2 Division 2, Groups F, G; and Class 3 locations.

It is also rated for Class I, Zone 1 and Zone 2, Group IIB plus hydrogen, and Zone 20, 21, and 22. The fixture is suitable for wet locations under UL 1598 and UL 1598A.

Facilities with requirements for ATEX, IECEX, CSA, and UL certifications can use this fixture where those standards are specified. The fixture is designed for use in environments with ambient temperatures from -22°F to 122°F.

Common applications include chemical plants, refineries, paint shops, grain processing, and other industrial sites with hazardous area classifications.

Performance and Functional Considerations

This fixture produces 9800 lumens at 70 watts, providing a high efficacy of 140 lumens per watt. It is intended as a direct replacement for 250 Watt metal halide fixtures in hazardous locations.

The 5000K color temperature delivers a neutral white light. The fixture has a CRI of 70+ and a power factor greater than 0.90. Total harmonic distortion is less than 10%.

It supports 1-10V dimming for output adjustment. The tempered glass lens and powder coated aluminum housing provide durability in demanding environments.

The fixture is rated IP66 for protection against dust and high-pressure water jets, and IK10 for maximum impact resistance. Surge protection is rated at 10kV.

Installation and Long-Term Use

Mounting options include yoke, 3/4 inch NPT pendant, surface, or wall. The fixture measures 13.7 inches high by 11.2 inches in diameter and weighs 20 lbs. No cord is included with the fixture.

The fixture operates on 100-277V at 50-60Hz. It is suitable for use in ambient temperatures from -22°F to 122°F. The powder coated aluminum housing resists corrosion and physical damage.

With a rated lifespan of 150,000 hours (L70), the fixture is designed for long-term operation in hazardous environments. The tempered glass lens is resistant to impacts and chemical exposure.

Routine maintenance is minimized due to the solid-state LED design and robust construction. The fixture is suitable for wet locations and environments with dust, moisture, or corrosive agents.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, high-output illumination in hazardous areas. The 1-10V dimming capability allows you to adjust light levels as needed for specific tasks or safety requirements.

The 120 degree beam angle delivers wide area coverage, reducing shadowing and supporting visibility in process areas, walkways, or storage zones. The fixture is typically mounted using the yoke or pendant options, but surface and wall mounting are also supported where required.

The powder coated aluminum housing and tempered glass lens hold up to impacts and harsh cleaning routines. You can rely on the fixture to maintain output and performance over time, even in environments with dust, moisture, or chemical exposure.

Day-to-day, the fixture requires minimal attention beyond periodic inspection. The robust design and environmental ratings support continuous use in demanding industrial settings.

Safety, Certifications, and Warranty

This fixture is UL listed for Class 1 Division 1, Class 1 Division 2, Class 2 Division 1, Class 2 Division 2, and Class 3 hazardous locations. It carries UL844, UL 1598, and UL 1598A listings.

The fixture is CSA, ATEX, and IECEX certified. It is rated IP66 for dust and water ingress protection and IK10 for impact resistance.

Surge protection is rated at 10kV. An optional 10 year warranty is available from LED Lighting Supply.

The fixture is suitable for use in wet locations and hazardous environments as defined by the listed certifications and ratings.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100-277V input.

What is the lumen output and wattage?
The fixture delivers 9800 lumens at 70 watts.

What hazardous location ratings does this fixture carry?
It is rated for Class 1 Division 1, Class 1 Division 2, Class 2 Division 1, Class 2 Division 2, and Class 3. It also meets Class I, Zone 1 and Zone 2, and Zone 20, 21, and 22 requirements.

What mounting options are available?
Mounting options include yoke, 3/4 inch NPT pendant, surface, or wall.

Is this fixture DLC qualified?
DLC qualification is not listed in the provided specifications.

What warranty coverage is available?
An optional 10 year warranty is available from LED Lighting Supply.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.