60 Watt Round Explosion Proof LED Light | 8400 Lumens | Class 1 Div 2 | 5000K | 100V-277V | NSF Rated

Product Overview

This 60 Watt Round Explosion Proof LED Light is designed for hazardous location lighting and food grade environments where safety and compliance are required. The fixture delivers 8400 lumens at 5000K and operates on 100V-277V. It is suitable for Class I Division 2, Class II Division 1 and 2, and Class III locations, with a housing built for demanding industrial and marine settings.

The fixture is NSF rated for food processing and clean area use, and is constructed with a copper-free aluminum housing for corrosion resistance. Typical installations include chemical processing facilities, paint booths, and oil and gas sites where explosive gases, dust, or vapors may be present. The 3/4 inch NPT pendant mount supports secure overhead installation in both new and retrofit projects.

Core Performance and Output

This fixture provides 8400 lumens at 60 watts, achieving 140 lumens per watt efficiency. The 120° beam angle delivers wide, even coverage suitable for open hazardous areas and process spaces. The 5000K color temperature supports high visibility and accurate color rendering in industrial environments.

Electrical performance includes a power factor above 0.95 and 1-10V dimming capability for integration with lighting controls. At mounting heights below 12 feet, output may be excessive for small rooms or confined spaces. Uniformity may decrease at mounting heights above 20 feet without supplemental fixtures.

Adjustability and Control Options

The fixture supports 1-10V dimming for output adjustment and integration with compatible control systems. This allows for energy management and adaptation to changing process or occupancy requirements. The wide beam distribution is fixed, with no field-adjustable optics or lens options.

Controls must be specified and installed separately. The fixture is compatible with standard hazardous location dimming protocols and can be integrated into centralized or distributed control systems as required by the facility.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70) and includes a 5-year warranty. The copper-free aluminum housing and polycarbonate lens provide resistance to corrosion, impact, and chemical exposure. The IP66 and IK10 ratings ensure protection against water, dust, and mechanical impact.

Operating temperature range is -40°F to 140°F, supporting use in cold storage, process areas, and outdoor marine environments. Surge protection is rated at 10kV for electrical reliability in industrial power systems.

Build Quality and Physical Characteristics

The housing is constructed from copper-free aluminum with a polycarbonate lens, supporting NSF food grade requirements and marine use. The fixture is UL 844, UL 1598, UL 1598A, ABS, and NSF certified. The 3/4 inch NPT pendant mount is standard for hazardous location installations.

The fixture is sealed to IP66 for wet locations and rated IK10 for impact resistance. All external hardware is corrosion resistant. The compact round form factor supports installation in confined or overhead spaces where clearance is limited.

Where This Product Fits Best

This fixture is designed for hazardous and explosion risk environments, as well as food processing and marine locations requiring NSF and ABS compliance. It is suitable for both new construction and retrofit projects where Class I, II, or III ratings are required.

• hazardous location lighting
• explosion proof lighting
• paint booth lighting
• chemical processing facility lighting
• oil and gas facility lighting
• refinery lighting
• marine environment lighting
• wastewater treatment lighting

The fixture is suitable for environments with explosive gases, dust, or vapors, as well as areas exposed to washdown, salt spray, or food processing requirements.

Installation and Long-Term Use

Installation is via 3/4 inch NPT pendant mount, compatible with rigid conduit systems in hazardous locations. The fixture is prewired for 100V-277V operation and supports standard hazardous area wiring practices. The compact design allows for installation in overhead, wall, or pendant positions as required by the application.

Routine maintenance is minimized by the sealed, non-serviceable design and long LED lifespan. Cleaning is supported by the NSF and IP66 ratings, allowing for washdown and sanitation procedures in food or marine environments. All service should be performed with power off and in accordance with hazardous location safety protocols.

How This Fixture Is Commonly Used

Typical mounting heights range from 10 to 20 feet, depending on the area size and required light levels. Fixtures are spaced to provide uniform coverage in process areas, paint booths, or hazardous storage rooms. In marine or food processing environments, spacing may be reduced to address obstructions or achieve higher uniformity.

Higher output allows for reduced fixture count in open areas, but may require glare management or shielding in confined spaces. Layouts are determined by hazard classification, process requirements, and local code compliance.

Safety, Certifications, and Warranty

This fixture is certified to UL 844, Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; Class III; UL 1598; UL 1598A; ABS; and NSF. It is IP66 and IK10 rated for ingress and impact protection. The fixture includes a 5-year warranty.

All certifications support use in hazardous, marine, and food grade environments. The fixture meets requirements for wet locations, impact resistance, and chemical exposure. Warranty coverage is standard for industrial LED lighting in these applications.

Frequently Asked Questions

Q: What hazardous location classifications does this fixture meet?

A: This fixture is certified for Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III.

Q: What is the recommended mounting height for this fixture?

A: Typical mounting heights are between 10 and 20 feet, depending on the area size and required light levels.

Q: Is this fixture suitable for food processing or clean room environments?

A: Yes, the fixture is NSF rated and supports use in food processing and clean area environments.

Q: What type of mounting is supported?

A: The fixture is designed for 3/4 inch NPT pendant mounting, compatible with rigid conduit systems.

Q: Can this fixture be used in marine or offshore environments?

A: Yes, it is UL 1598A Marine Outside Type and ABS certified for marine and offshore use.

Q: How should fixture spacing be determined in hazardous areas?

A: Spacing depends on mounting height, area size, and required light levels. Layouts should be designed to meet hazard classification and uniformity requirements.

Application Questions and Clarification

Q: Is this fixture appropriate for use in a paint booth with flammable vapors?

A: Yes, the fixture is certified for hazardous locations including paint booths with flammable vapors.

Q: Can this fixture be installed in a chemical processing facility with corrosive atmospheres?

A: Yes, the copper-free aluminum housing and certifications support use in chemical processing environments with corrosive atmospheres.

Q: Is this fixture suitable for wastewater treatment plant lighting?

A: Yes, the fixture is certified for hazardous locations and is suitable for wastewater treatment plant lighting.

Q: Does the fixture require any special maintenance for food grade or marine environments?

A: Routine cleaning is supported by the NSF and IP66 ratings. No special maintenance is required beyond standard procedures for these environments.