60 Watt Round Explosion Proof LED Light | 8400 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100V-277V

Product Overview

This 60 Watt round explosion proof LED light delivers 8400 lumens at 5000K. It is designed for hazardous locations and classified for use in Class I Division 2, Class II Division 1 and 2, and Class III environments.

The fixture operates on 100V-277V and supports 1-10V dimming. It is built with a copper free aluminum housing and a tempered glass lens. The standard beam angle is 120°, with optional 40°, 60°, or 90° optics available.

The fixture is IP66 rated for dust and water ingress and carries an IK10 impact rating. It is ETL listed and rebate eligible. The expected lifespan is 50,000 hours (L70).

Mounting options include yoke or 3/4 inch NPT pendant. The fixture measures 7.09 x 9.09 inches and weighs 8 lbs.

Where This Product Fits Best

This fixture is suitable for hazardous locations where explosive gases, vapors, or dusts may be present under abnormal conditions. It is classified for use in Class I Division 2 (Groups A, B, C, D), Class II Division 1 (Groups E, F, G), Class II Division 2 (Groups F, G), and Class III areas.

It is also suitable for wet locations and marine outside type environments, as specified by UL 1598 and UL 1598A. The IP66 rating allows use in areas exposed to heavy washdown, rain, or dust.

The fixture is designed to replace 250 Watt metal halide lights in hazardous or industrial settings. It is appropriate for use in refineries, chemical plants, grain processing, and similar facilities.

Operating temperature range is -40°F to 140°F, supporting use in both cold storage and high-heat industrial spaces.

Performance and Functional Considerations

The fixture delivers 140 lumens per watt, providing efficient output for hazardous environments. The 5000K color temperature supports visibility in work areas.

1-10V dimming is supported for applications requiring adjustable light levels. The fixture has a power factor greater than 0.95 and total harmonic distortion below 10%.

Beam angle options allow adaptation to different mounting heights and coverage requirements. The tempered glass lens and copper free aluminum housing provide durability in demanding conditions.

10kV surge protection is built in for electrical reliability. The fixture is rated for 50-60Hz operation.

Installation and Long-Term Use

Mounting options include yoke or 3/4 inch NPT pendant, supporting ceiling, wall, or pendant installations. The fixture weighs 8 lbs and measures 7.09 x 9.09 inches, allowing for installation in tight or overhead spaces.

The IP66 rating protects against dust and strong water jets, supporting use in washdown areas or outdoors. The IK10 rating allows the fixture to withstand high impact from accidental contact or equipment.

The fixture is constructed from copper free aluminum to resist corrosion in chemical or marine environments. The tempered glass lens is designed for durability and clarity over time.

Rated lifespan is 50,000 hours (L70), supporting long-term operation with minimal maintenance. The operating temperature range supports use in both refrigerated and high-temperature areas.

How This Fixture Is Commonly Used

After installation, this fixture provides consistent illumination in hazardous locations where explosive gases or dusts may be present. The 5000K color temperature supports clear visibility for inspection, maintenance, and production tasks.

Beam angle options allow you to select the distribution that matches your area?s needs. Wider angles are used for general area lighting, while narrower options can focus light on specific zones or equipment.

The fixture?s dimming capability allows integration with lighting controls for energy management or task-specific lighting levels. The robust housing and lens construction support daily operation in environments with vibration, dust, or washdown cleaning.

Routine cleaning and inspection are supported by the fixture?s accessible design and durable materials. The fixture?s impact and ingress protection ratings reduce concerns about accidental damage or environmental exposure during normal facility operations.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. It is certified to UL 844 for hazardous locations, UL 1598 for wet locations, and UL 1598A for marine outside type environments.

Explosion proof classifications include Class I Division 2 (Groups A, B, C, D), Class II Division 1 (Groups E, F, G), Class II Division 2 (Groups F, G), and Class III. ABS certification is included.

ATEX and IECEx markings are present for applicable hazardous area requirements. The fixture is IP66 rated for dust and water ingress and IK10 rated for impact resistance.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V.

What is the light output?
The fixture delivers 8400 lumens.

What hazardous location classifications does this fixture carry?
This fixture is classified for Class I Division 2 (Groups A, B, C, D), Class II Division 1 (Groups E, F, G), Class II Division 2 (Groups F, G), and Class III.

What mounting options are available?
Mounting options include yoke or 3/4 inch NPT pendant.

Is this fixture suitable for wet or marine environments?
This fixture is UL 1598 suitable for wet locations and UL 1598A marine outside type.

What certifications does this fixture carry?
This fixture is ETL listed and rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.