30 Watt 2 Foot Explosion Proof Linear LED Light | 4800 Lumens | Class 1 Div 2 | 5000K | 100-277V

Product Overview

This 30 Watt 2 Foot Explosion Proof Linear LED Light is designed for hazardous location lighting where flammable gases, vapors, or combustible dusts are present. The fixture delivers 4800 lumens at 5000K, providing clear, white light for operational safety and visibility. Typical installations include oil and gas facilities, chemical processing plants, and solvent storage areas where Class 1 Division 2 compliance is required. The compact linear form factor allows for mounting in tight or confined spaces, including walkways, corridors, and equipment rooms.

Suitable for both new construction and retrofit projects, this fixture is engineered for environments demanding robust protection against ignition sources. It is rated for use in wet locations and marine environments, supporting a range of hazardous and corrosive applications. Mounting options include surface, trunnion, or 3/4 inch NPT pendant, allowing flexibility in installation based on site requirements.

Core Performance and Output

This fixture outputs 4800 lumens at 30 watts, achieving an efficacy of 160 lumens per watt. The 120° beam angle and frosted polycarbonate lens provide wide, uniform illumination with reduced glare. Color temperature is 5000K, supporting high-contrast visibility in industrial settings. Power factor exceeds 0.90, and total harmonic distortion is below 10%, ensuring stable electrical performance on 100-277V circuits.

Output is suitable for mounting heights up to approximately 12-16 feet, depending on target light levels and spacing. Excessive output may occur at lower mounting heights in small rooms or confined spaces. At maximum mounting height, uniformity may decrease if fixtures are spaced too far apart or if obstructions are present.

Adjustability and Control Options

The fixture supports 1-10V dimming for integration with lighting control systems or manual dimmers. This allows for light level adjustment based on occupancy, process requirements, or energy management protocols. Dimming is smooth and flicker-free across the full range.

No onboard motion or daylight sensors are included. Control integration is achieved through external dimming circuits or building automation systems. The fixture is compatible with standard 50/60 Hz power supplies.

Longevity and Reliability

Rated for 150,000 hours (L70), this fixture is designed for long-term operation in demanding environments. The LED driver and light engine are protected against surges up to 6kV, reducing risk of premature failure from electrical disturbances. Operating temperature range is -31°F to 131°F, supporting use in both cold and hot climates.

Maintenance requirements are minimal due to the sealed, non-serviceable design. The fixture is resistant to dust, water, and impact, reducing the likelihood of environmental ingress or physical damage over time.

Build Quality and Physical Characteristics

The housing is constructed from fiberglass reinforced polycarbonate, providing high impact resistance (IK08) and corrosion resistance for chemical and marine environments. The fixture is IP66 rated for protection against water jets and dust ingress. The frosted polycarbonate lens diffuses light and protects the LEDs from direct contact.

Dimensions are 24.3 x 4.7 x 4.8 inches, with a weight of 7.7 lbs. The fixture is finished in gray and does not include a cord. Mounting options include surface, trunnion, or 3/4 inch NPT pendant, supporting a range of installation scenarios.

Where This Product Fits Best

This fixture is intended for hazardous locations where explosion proof lighting is required. It is commonly installed in environments with flammable gases, vapors, or dusts, as well as areas exposed to moisture, salt, or corrosive chemicals. The compact linear design is suited for corridors, walkways, and equipment rooms where space is limited.

• hazardous location lighting
• explosion proof lighting
• paint booth lighting
• chemical processing facility lighting
• oil and gas facility lighting
• refinery lighting
• marine environment lighting
• solvent storage area lighting

Environmental characteristics include resistance to water, dust, impact, and corrosive agents. The fixture is suitable for both indoor and outdoor hazardous areas, including marine and offshore locations.

Installation and Long-Term Use

Mounting options include surface, trunnion, or 3/4 inch NPT pendant, supporting installation on ceilings, walls, or structural supports. The fixture is designed for fixed mounting in hazardous areas and should be installed according to local codes for explosion proof equipment. No cord is supplied; field wiring is required.

Routine maintenance is limited to periodic inspection for physical damage or environmental buildup. The sealed design prevents ingress of dust and water, reducing cleaning frequency. Replacement is typically driven by end-of-life or physical damage rather than routine service.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 16 feet, depending on the application and required light levels. Fixtures are often spaced to provide continuous or overlapping coverage in corridors, walkways, or process areas. In larger rooms, multiple fixtures may be installed in rows or grids to achieve uniform illumination.

Spacing and layout are determined by the size of the area, mounting height, and target illuminance. Higher output allows for wider spacing but may increase glare if installed too close to work surfaces or reflective equipment.

Safety, Certifications, and Warranty

This fixture is certified to UL 844 Hazardous Locations, Class 1 Division 2 Groups B, C, D; Class 2 Division 2 Groups F, G; and Class 3. Additional certifications include UL 1598 for wet locations, UL 1598A Marine Outside Type, CSA, ATEX, and IECEx. The fixture is IP66 and IK08 rated for ingress and impact protection.

Surge protection is rated at 6kV. The product includes a 5-year warranty covering manufacturing defects and performance.

Frequently Asked Questions

Q: What hazardous location classifications does this fixture meet?

A: This fixture is certified for Class 1 Division 2 Groups B, C, D; Class 2 Division 2 Groups F, G; and Class 3 hazardous locations.

Q: What is the recommended mounting height for this 30W explosion proof linear LED?

A: Recommended mounting height is typically 8 to 16 feet, depending on the required light levels and area size.

Q: What mounting options are available?

A: Surface, trunnion, and 3/4 inch NPT pendant mounting options are supported.

Q: Is this fixture suitable for marine or offshore environments?

A: Yes, it is UL 1598A Marine Outside Type certified and IP66 rated for marine and offshore use.

Q: Does the fixture support dimming?

A: Yes, 1-10V dimming is supported for integration with external controls.

Q: What is the expected lifespan of this fixture?

A: The rated lifespan is 150,000 hours (L70).

Q: How should fixture spacing be determined for continuous coverage?

A: Spacing depends on mounting height, area size, and target illuminance. For uniform coverage, consult a lighting layout or photometric plan.

Application Questions and Clarification

Q: Can this fixture be used in a paint booth with flammable vapors?

A: Yes, this fixture is certified for hazardous locations including paint booths with flammable vapors.

Q: Is this fixture appropriate for solvent storage areas?

A: Yes, it is suitable for solvent storage areas requiring explosion proof lighting.

Q: Is this fixture compatible with chemical processing environments?

A: Yes, it is designed for use in chemical processing facilities with hazardous atmospheres.

Q: Can this fixture be installed in outdoor marine environments?

A: Yes, it is certified for marine outside type and is IP66 rated for outdoor marine environments.