250 Watt Explosion Proof LED Flood Light | 35000 Lumens | Class 1 Div 2 | 5000K | 100-277V

Product Overview

This is a 250 watt LED fixture designed for hazardous locations and demanding industrial environments. Output is 35,000 lumens at 140 lumens per watt, with a 5000K color temperature and a CRI above 70.

The fixture is built with a copper free aluminum housing and a tempered glass lens. It is rated for use in wet locations, marine outside type environments, and carries an IP66 and IK09 rating.

Standard beam angle is 120°, with optional 40°, 60°, or 90° optics available. Dimming is supported via 1-10V controls. The fixture operates on 100V-277V at 50-60Hz, with a power factor above 0.90 and THD below 10%.

Mounting options include yoke and slip fitter. The fixture measures 19 x 15.9 x 3.1 inches and weighs 16.5 lbs.

Where This Product Fits Best

This fixture is suitable for hazardous locations requiring UL 844 compliance, including Class I, Division 2 (Groups A, B, C, D), Class II, Division 1 (Groups E, F, G), Class II, Division 2 (Groups F, G), and Class III environments.

It is also suitable for wet locations and marine outside type applications under UL 1598 and UL 1598A. The ABS certification supports use in marine and offshore environments.

With an IP66 rating, the fixture can be used in areas exposed to dust, water jets, or heavy washdown. The IK09 rating allows use in locations where impact resistance is required.

This fixture is intended as a replacement for 400 watt metal halide systems in industrial, manufacturing, or hazardous area settings.

Performance and Functional Considerations

The fixture delivers 35,000 lumens at 250 watts, providing a direct replacement for legacy 400 watt metal halide fixtures. The 5000K color temperature supports high visibility in work areas.

Beam angle options allow adjustment of light distribution to suit open areas or more focused task zones. The tempered glass lens supports durability in harsh environments.

The fixture supports 1-10V dimming for integration with compatible controls. Power factor is above 0.90 and THD is below 10% for stable operation on 100V-277V circuits.

Lifespan is rated at 244,000 hours (L70), supporting long-term use with minimal maintenance requirements.

Installation and Long-Term Use

Mounting options include yoke and slip fitter, allowing installation on flat surfaces or poles as required by the site. The fixture's weight is 16.5 lbs, and dimensions are 19 x 15.9 x 3.1 inches.

The copper free aluminum housing resists corrosion in marine and chemical environments. The IP66 rating allows installation in locations exposed to water, dust, or washdown.

Operating temperature range is -40°F to 140°F, supporting use in both cold storage and high heat industrial settings. The tempered glass lens and IK09 rating provide impact resistance for areas with equipment movement or risk of contact.

Long-term maintenance is minimized by the fixture's rated lifespan and robust construction. Dimming and control integration are supported via standard 1-10V wiring.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, high-output lighting in hazardous or industrial areas. The 5000K color temperature supports clear visibility for inspection, assembly, or process work.

Beam angle selection allows you to tailor the fixture's coverage to the space. Wider angles are used for general area lighting, while narrower options can be used to focus light on specific equipment or work zones.

The fixture can be dimmed using 1-10V controls, allowing adjustment of light levels to match operational needs or shift patterns. The robust housing and lens reduce the need for frequent inspection or replacement, even in demanding environments.

After installation, the fixture operates reliably across a wide voltage range and in both indoor and outdoor hazardous locations. Maintenance is limited to periodic cleaning and inspection as required by site protocols.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations, including Class I, Division 2 (Groups A, B, C, D), Class II, Division 1 (Groups E, F, G), Class II, Division 2 (Groups F, G), and Class III.

It is UL 1598 listed for wet locations and UL 1598A listed for marine outside type environments. The fixture is ABS certified.

The product carries ETL and Rebate Eligible listings. The IP66 rating allows use in areas exposed to water and dust. IK09 rating supports use in locations where impact resistance is required.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage range does this fixture support?
This fixture operates on 100V-277V.

What is the output and intended replacement class?
Output is 35,000 lumens at 250 watts. It is intended to replace 400 watt metal halide fixtures.

What environmental ratings does this fixture carry?
This fixture is rated IP66 and IK09. It is UL 1598 listed for wet locations and UL 1598A listed for marine outside type environments.

What mounting options are available?
Mounting options include yoke and slip fitter.

What certifications does this fixture have?
This fixture is UL 844 listed, UL 1598 listed, UL 1598A listed, ABS certified, and ETL listed.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.