200 Watt Round Explosion Proof LED Light | 28000 Lumens | Class 1 Div 2 | 5000K | 100-277V

Product Overview

The 200 Watt Round Explosion Proof LED Light is designed for hazardous location lighting where flammable gases, vapors, or combustible dusts are present. This fixture delivers 28,000 lumens at 5000K and operates on 100-277V, making it suitable for demanding industrial environments. Typical installations include oil and gas facilities, chemical processing plants, and solvent storage areas where Class I, II, or III hazardous classifications apply.

This model is built for use in areas requiring UL 844, Class I Division 2, and related certifications. It is commonly used as a direct replacement for 1000W metal halide fixtures, supporting mounting heights from 18 to 35 feet depending on required light levels and layout.

Core Performance and Output

This fixture outputs 28,000 lumens at 140 lumens per watt, providing high efficiency for hazardous environments. The 120° beam angle delivers wide, even coverage suitable for open process areas, storage zones, and large workspaces. Color temperature is 5000K with a CRI above 70, supporting accurate visual tasks in industrial settings.

Electrical performance includes a power factor above 0.90 and THD below 10%. 1-10V dimming is standard for integration with compatible controls. At mounting heights below 18 feet, output may be excessive and increase glare; at heights above 35 feet, uniformity may decrease without careful layout.

Adjustability and Control Options

The fixture supports 1-10V dimming for basic output control and energy management. Dimming can be integrated with hazardous location-rated control systems where required. The yoke mount allows for aiming adjustment during installation, while the 3/4 in NPT pendant mount provides fixed vertical orientation.

No onboard sensor or advanced control options are included. All adjustments must be made at installation or through external control systems rated for hazardous locations.

Longevity and Reliability

L70 rated life is 150,000 hours, supporting long-term operation in continuous-use environments. The fixture includes 10kV surge protection to guard against electrical disturbances common in industrial power systems.

Powder coated aluminum housing, tempered glass lens, and IP66 ingress protection ensure resistance to dust, water, and corrosion. IK08 impact rating supports durability in areas with incidental contact or vibration.

Build Quality and Physical Characteristics

The housing is powder coated aluminum with a gray finish. The fixture measures 14.96 inches wide by 14.37 inches high and weighs 20 lbs. The lens is tempered glass for chemical and impact resistance. All hardware is designed for use in hazardous and corrosive environments.

Mounting options include yoke or 3/4 in NPT pendant. Optional surface or wall mounting is available. No cord is supplied; field wiring is required using hazardous location-rated conduit and fittings.

Where This Product Fits Best

This fixture is intended for hazardous locations where explosive gases, vapors, or dusts are present. It is suitable for both indoor and outdoor use in industrial environments requiring explosion proof or hazardous location lighting. The design supports use in oil and gas, chemical, and marine facilities, as well as solvent storage and wastewater treatment areas.

• hazardous location lighting
• explosion proof lighting
• paint booth lighting
• chemical processing facility lighting
• oil and gas facility lighting
• refinery lighting
• marine environment lighting
• wastewater treatment lighting

IP66 and UL 1598A Marine ratings allow installation in wet, corrosive, or marine-exposed environments. The fixture is not intended for general-purpose warehouse or sports lighting outside of hazardous or classified areas.

Installation and Long-Term Use

Mounting is by yoke or 3/4 in NPT pendant, supporting ceiling, wall, or surface installation. All wiring must comply with hazardous location requirements, including use of approved conduit and fittings. The fixture?s weight and size require secure mounting to structural members or rated supports.

Routine maintenance is minimized by the long LED life and sealed construction. In marine or corrosive environments, periodic inspection of seals and hardware is recommended. No field serviceable parts are included; replacement is by fixture swap if required.

How This Fixture Is Commonly Used

Typical mounting heights range from 18 to 35 feet, depending on required light levels and area size. Fixtures are spaced to achieve uniform coverage in process areas, storage zones, or hazardous workspaces. Layouts often use grid or perimeter patterns to avoid shadowing and maintain code-required illumination.

Higher output allows for reduced fixture count in large open areas, but may require careful aiming or shielding to control glare. Spacing and layout should be verified against hazardous area classification and task requirements.

Safety, Certifications, and Warranty

This fixture is certified to UL 844 Hazardous Locations, UL 1598 Wet Locations, UL 1598A Marine Outside Type, CSA, ATEX, and IECEx. It meets Class I Division 2 (Groups A, B, C, D), Class II Division 1 and 2 (Groups E, F, G), and Class III requirements. IP66 and IK08 ratings apply.

Warranty is 5 years from date of installation. All safety and certification requirements must be maintained during installation and operation. Only qualified personnel should install or service this fixture in hazardous locations.

Frequently Asked Questions

Q: What is the typical mounting height for this 200W explosion proof fixture?

A: Typical mounting heights range from 18 to 35 feet, depending on required light levels and area size.

Q: Can this fixture be used in marine or offshore environments?

A: Yes, the fixture is rated UL 1598A Marine Outside Type, IP66, and is suitable for marine and offshore hazardous locations.

Q: What mounting options are available?

A: Standard mounting is by yoke or 3/4 in NPT pendant. Surface and wall mounting options are also available.

Q: Is this fixture dimmable?

A: Yes, it supports 1-10V dimming with compatible hazardous location-rated controls.

Q: How many fixtures are needed for a typical hazardous area?

A: Fixture count depends on area size, mounting height, and required light levels. Layout should be verified for code compliance and uniformity.

Application Questions and Clarification

Q: Is this fixture suitable for general warehouse or gymnasium lighting?

A: No, this fixture is intended for hazardous or classified locations only. It is not designed for general-purpose warehouse or sports lighting.

Q: Can this fixture be installed in a paint booth or solvent storage area?

A: Yes, it is certified for use in paint booths and solvent storage areas with appropriate hazardous location classifications.

Q: What environments require the use of explosion proof lighting like this?

A: Environments with flammable gases, vapors, combustible dusts, or classified hazardous areas require explosion proof lighting per code.

Q: Does the fixture require special wiring or conduit?

A: Yes, all wiring and conduit must comply with hazardous location requirements and use approved fittings.