200 Watt Round Explosion Proof LED Light | 28000 Lumens | Class 1 Div 2 | 5000K | 100V-277V or 277V-480V

Product Overview

We supply the 200 Watt Round Explosion Proof LED Light for hazardous location lighting where flammable gases, vapors, or dusts are present. This fixture is designed for use in Class I Division 2, Class II Division 1 and 2, and Class III environments. Typical installations include paint booths, chemical processing areas, and other hazardous industrial spaces requiring certified explosion proof lighting. The fixture replaces 400W metal halide units and is suitable for mounting heights commonly found in process areas and industrial buildings.

This model operates on 100V-277V or 277V-480V and delivers 28,000 lumens at 5000K. It is built for demanding environments, with a copper-free aluminum housing, tempered glass lens, and IP66/IK10 ratings for wet and impact-prone locations. Mounting options include yoke or 3/4 inch NPT pendant for ceiling or structure attachment.

Core Performance and Output

This fixture provides 28,000 lumens at 200 watts, with a system efficacy of 140 lumens per watt. The standard beam angle is 120°, with optional 40°, 60°, or 90° optics for controlled distribution in process areas or confined spaces. The 5000K color temperature supports high-visibility tasks in hazardous environments. Power factor is greater than 0.95, and THD is less than 10% for stable operation on industrial circuits.

At mounting heights between 15 and 30 feet, the output is suitable for general area illumination or task lighting in hazardous zones. Excessive output may occur at low mounting heights, and narrow optics are recommended for high-ceiling or aisle applications to maintain uniformity. Dimming is available via 1-10V controls for further output adjustment.

Adjustability and Control Options

The fixture supports 1-10V dimming for output control and energy management. Beam angle can be specified at order with 40°, 60°, 90°, or 120° options to match the lighting pattern to the application. This allows for adaptation to open areas, aisles, or focused task zones within hazardous locations.

Mounting is flexible with both yoke and 3/4 inch NPT pendant options, supporting ceiling, wall, or structure attachment. The fixture is compatible with standard hazardous location wiring and conduit practices.

Longevity and Reliability

L70 rated life is 50,000 hours. The fixture is designed for continuous operation in harsh environments, including exposure to dust, moisture, and corrosive agents. The copper-free aluminum housing and tempered glass lens resist corrosion and impact.

Operating temperature range is -40°F to 140°F. Surge protection is rated at 10kV, supporting reliability in industrial power environments. The fixture is covered by a 5-year warranty.

Build Quality and Physical Characteristics

The housing is copper-free aluminum with a gray finish. The lens is tempered glass for chemical and impact resistance. The fixture is IP66 rated for water and dust ingress and IK10 rated for impact protection. Weight is 18.1 lbs, and dimensions are 14.56 x 11.4 inches.

All hardware and seals are designed for hazardous location use. The fixture is suitable for wet locations and marine outside type environments per UL 1598A. Mounting hardware supports both yoke and pendant installations.

Where This Product Fits Best

This explosion proof LED fixture is intended for hazardous industrial environments where certified lighting is required. It is commonly installed in:

• hazardous location lighting
• explosion proof lighting
• paint booth lighting
• chemical processing facility lighting
• oil and gas facility lighting
• refinery lighting
• marine environment lighting
• wastewater treatment lighting

Environmental characteristics include resistance to flammable gases, vapors, dusts, water, and impact. The fixture is suitable for both indoor and outdoor hazardous areas, including marine and corrosive environments.

Installation and Long-Term Use

Mounting options include yoke and 3/4 inch NPT pendant, supporting ceiling, wall, or structure attachment. The fixture is compatible with standard hazardous location conduit and wiring methods. Weight and size allow for single-person installation in most cases, but secure attachment to rated structure is required.

Routine maintenance is minimized due to the sealed design and long LED life. The tempered glass lens can be cleaned with standard non-abrasive methods. Periodic inspection of seals and mounting hardware is recommended in corrosive or marine environments.

How This Fixture Is Commonly Used

Typical mounting heights range from 15 to 30 feet, depending on the area and required light levels. Spacing is determined by beam angle selection and target uniformity, with narrower optics supporting higher ceilings or aisle layouts. Fixtures are often spaced to provide overlapping coverage in process areas or to meet code requirements for hazardous zones.

Higher output reduces fixture count but may increase glare in confined spaces. Dimming and beam angle selection can be used to balance coverage and visual comfort.

Safety, Certifications, and Warranty

This fixture is certified to UL 844 for hazardous locations, including Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III. It is UL 1598 and UL 1598A Marine Outside Type listed, ABS certified, and carries ATEX and IECEx markings. IP66 and IK10 ratings apply. The fixture includes a 5-year warranty.

All certifications are valid for hazardous, marine, and wet location use as specified. The fixture meets requirements for installation in regulated hazardous environments.

Frequently Asked Questions

Q: What hazardous location classifications does this fixture meet?

A: This fixture is certified for Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III.

Q: What mounting options are available?

A: Yoke and 3/4 inch NPT pendant mounting are supported for ceiling, wall, or structure attachment.

Q: What is the recommended mounting height for this fixture?

A: Typical mounting heights are 15 to 30 feet, depending on area size and required light levels.

Q: Can this fixture be used in marine or corrosive environments?

A: Yes, the fixture is UL 1598A Marine Outside Type and ABS certified for marine and corrosive locations.

Q: How is beam angle selected?

A: Beam angle is specified at order with options for 40°, 60°, 90°, or 120° to match the application.

Q: What is the expected lifespan and warranty?

A: The fixture is rated for 50,000 hours (L70) and includes a 5-year warranty.

Q: How should fixtures be spaced for uniform coverage?

A: Spacing depends on mounting height, beam angle, and target light levels; narrower optics support wider spacing at higher mounting heights.

Application Questions and Clarification

Q: Is this fixture suitable for use in paint booths with flammable vapors?

A: Yes, this fixture is certified for hazardous locations including paint booths with flammable vapors.

Q: Can this fixture be installed in outdoor hazardous areas exposed to rain?

A: Yes, the fixture is IP66 rated and suitable for wet locations, including outdoor hazardous areas.

Q: Is this fixture appropriate for use in oil and gas processing facilities?

A: Yes, it is certified for hazardous locations found in oil and gas processing facilities.

Q: Does the fixture require special wiring or conduit for hazardous locations?

A: Yes, installation must follow hazardous location wiring and conduit requirements per code.