150 Watt Explosion Proof LED Flood Light | 21000 Lumens | Class 1 Div 2 | 5000K | 100-277V

Product Overview

This 150 Watt Explosion Proof LED Flood Light is designed for hazardous location lighting where flammable gases, vapors, or combustible dusts are present. It delivers 21,000 lumens at 5000K, providing high-output illumination for environments that require strict safety compliance. Typical installations include paint booths, chemical processing areas, and oil and gas facilities where Class I, II, and III ratings are required.

The fixture is engineered to replace 400W metal halide units, offering a compact form factor with yoke or slip fitter mounting options. It is suitable for mounting heights commonly found in industrial hazardous locations and marine environments.

Core Performance and Output

This fixture outputs 21,000 lumens at 150 watts, achieving 140 lumens per watt efficiency. The standard 120° beam angle provides wide area coverage, with optional 40°, 60°, or 90° optics for controlled distribution. The 5000K color temperature supports high-visibility tasks in hazardous environments.

Electrical performance includes 100-277V input, power factor above 0.90, and THD below 10%. Excessive output may occur at low mounting heights, and uniformity can be affected at extreme heights without proper optic selection.

Adjustability and Control Options

The fixture supports 1-10V dimming for output adjustment and integration with lighting controls. Yoke mounting is standard, allowing for precise aiming and tilt adjustment. An optional slip fitter mount is available for pole or tenon installations.

Beam angle selection enables adaptation to specific area coverage or task lighting requirements. Dimming and aiming adjustments are accessible during installation and maintenance.

Longevity and Reliability

L70 rated life is 244,000 hours, supporting long-term operation in demanding environments. The fixture is built for continuous use in hazardous and corrosive locations, minimizing maintenance intervals.

Performance is stable across a wide temperature range from -40°F to 140°F. The fixture maintains output and reliability in both indoor and outdoor hazardous locations.

Build Quality and Physical Characteristics

The housing is constructed from copper-free aluminum for corrosion resistance. The tempered glass lens and IP66 rating provide protection against dust, water, and high-pressure washdowns. IK09 impact rating supports use in areas with mechanical hazards.

Dimensions are 16.3 x 10.4 x 3.0 inches, with a weight of 16.5 lbs. The fixture is suitable for both wall and ceiling mounting, as well as pole or structure attachment using the appropriate bracket.

Where This Product Fits Best

This explosion proof LED flood light is intended for hazardous locations where explosive gases, vapors, or dusts are present. It is commonly installed in environments requiring Class I, II, or III compliance, including paint booths and chemical processing areas. The fixture is also suitable for marine and offshore applications where corrosion resistance and wet location ratings are required.

• hazardous location lighting
• explosion proof lighting
• paint booth lighting
• chemical processing facility lighting
• oil and gas facility lighting
• refinery lighting
• marine environment lighting
• wastewater treatment lighting

Environmental characteristics include resistance to water ingress, dust, impact, and corrosive atmospheres. The fixture is suitable for both indoor and outdoor hazardous areas, including marine and offshore platforms.

Installation and Long-Term Use

Yoke mounting allows for direct attachment to walls, ceilings, or structural supports. The optional slip fitter enables installation on poles or tenons. All hardware is designed for use in hazardous and corrosive environments.

Routine maintenance is minimized due to the long LED lifespan and robust construction. Access for aiming and optic adjustment is provided during installation. Ensure mounting surfaces and electrical connections meet hazardous location requirements.

How This Fixture Is Commonly Used

Typical mounting heights range from 12 to 30 feet, depending on the area and required light levels. Fixtures are spaced to achieve uniform coverage in paint booths, process areas, or exterior hazardous zones. Layouts often use wide beam angles for general area lighting or narrow optics for targeted illumination.

Higher output can reduce fixture count but may increase glare if not properly aimed or shielded. Optic selection and mounting orientation should be coordinated with site safety requirements.

Safety, Certifications, and Warranty

This fixture is certified to UL 844 for hazardous locations, including Class I Division 2 (Groups A, B, C, D), Class II Division 1 and 2 (Groups E, F, G), and Class III. Additional certifications include UL 1598, UL 1598A Marine Outside Type, and ABS. The fixture is IP66 and IK09 rated.

Operating temperature is -40°F to 140°F. A 5-year warranty is provided.

Frequently Asked Questions

Q: What hazardous location classifications does this fixture meet?

A: This fixture is rated for Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III.

Q: What mounting options are available?

A: Standard yoke mounting is included, with an optional slip fitter for pole or tenon installations.

Q: Can this fixture be used in marine or offshore environments?

A: Yes, it is UL 1598A Marine Outside Type and ABS certified for marine and offshore use.

Q: What is the recommended mounting height for this fixture?

A: Typical mounting heights range from 12 to 30 feet, depending on the application and required light levels.

Q: How does beam angle selection affect coverage?

A: Wider beam angles provide broader area coverage, while narrower optics focus light for targeted illumination or higher mounting heights.

Q: What is the expected lifespan of the LEDs?

A: The fixture is rated for 244,000 hours (L70).

Application Questions and Clarification

Q: Is this fixture suitable for use in paint booths with flammable vapors?

A: Yes, it is certified for hazardous locations including paint booth environments with flammable vapors.

Q: Can this fixture be installed in wastewater treatment facilities?

A: Yes, it is suitable for hazardous and corrosive environments such as wastewater treatment facilities.

Q: Does the fixture support dimming controls?

A: Yes, it supports 1-10V dimming for output adjustment and integration with control systems.

Q: What maintenance is required over the life of the fixture?

A: Routine maintenance is minimal due to the long LED lifespan and sealed construction; periodic inspection of mounting and electrical connections is recommended.