100 Watt Round Explosion Proof LED Light | 14000 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100V-277V | NSF Rated

Product Overview

This 100 Watt round explosion proof LED fixture delivers 14,000 lumens at 5000K. It is designed for hazardous locations with Class I Division 2 and Class II Division 2 ratings, as well as Class II Division 1 and Class III coverage.

The fixture operates on 100V-277V input and supports 1-10V dimming. It is built with a copper-free aluminum housing and a polycarbonate lens. The standard beam angle is 120 degrees.

This model is NSF rated for food-grade environments and carries UL 844, UL 1598, UL 1598A, ABS, and ETL certifications. It is suitable for wet locations and marine outside type applications.

The fixture is designed to replace 400 Watt metal halide systems and is rated for 50,000 hours (L70). Dimensions are 12.6 inches in diameter by 9.2 inches high, with a weight of 22.60 lbs.

Where This Product Fits Best

This fixture is intended for hazardous environments where explosive gases, vapors, or dusts may be present under abnormal conditions. It is suitable for facilities requiring Class I Division 2, Class II Division 1, Class II Division 2, or Class III lighting.

It is also NSF rated, making it appropriate for food processing, packaging, or storage areas where cleanability and food safety are required. The IP66 rating allows use in locations exposed to water jets or heavy washdown.

The fixture is compatible with marine outside type environments and wet locations. It is commonly used in industrial, manufacturing, chemical, and food-grade facilities.

Voltage compatibility from 100V to 277V supports a range of commercial and industrial electrical systems.

Performance and Functional Considerations

The fixture delivers 140 lumens per watt, providing high output for hazardous and industrial spaces. The 5000K color temperature supports visibility in work areas.

With a CRI of 80+, color rendering is suitable for most industrial and inspection tasks. The 1-10V dimming capability allows for integration with compatible dimming controls.

The polycarbonate lens and copper-free aluminum housing provide durability in demanding environments. The fixture is rated for operation from -40°F to 140°F.

Surge protection is rated at 10kV. The power factor is greater than 0.95, supporting efficient operation.

Installation and Long-Term Use

The fixture mounts using a 3/4 inch NPT pendant, which is standard for hazardous location lighting. The weight of 22.60 lbs should be considered when planning mounting points and support structures.

The IP66 rating means the fixture can withstand high-pressure water jets and is dust tight. The IK10 rating allows the fixture to tolerate significant impact in industrial settings.

Maintenance requirements are reduced by the 50,000 hour (L70) rated lifespan. The fixture is designed for long-term use in environments with temperature extremes and exposure to moisture or chemicals.

All housing and lens materials are selected for corrosion resistance and durability in food-grade and marine environments.

How This Fixture Is Commonly Used

After installation, this fixture provides consistent, high-output lighting in hazardous and food-grade areas. The 1-10V dimming allows you to adjust light levels to match operational needs or integrate with facility-wide lighting controls.

The fixture?s NSF rating means it can be cleaned and maintained in environments where food safety is a concern. The IP66 and IK10 ratings allow for routine washdown and cleaning without risk of water or impact damage.

Operators rely on this fixture for reliable illumination in areas where explosive gases or dusts may be present. The wide 120-degree beam angle supports general area lighting without the need for frequent adjustment.

Once installed, the fixture requires minimal attention aside from periodic cleaning and inspection, supporting uninterrupted operation in demanding environments.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations and UL 1598 suitable for wet locations. It is also UL 1598A marine outside type rated.

The product carries ETL and NSF listings. It is ABS certified and rebate eligible.

The housing is rated IP66 for water and dust protection and IK10 for impact resistance. Surge protection is rated at 10kV.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V.

What is the output and replacement class?
The fixture delivers 14,000 lumens and is designed to replace 400 Watt metal halide systems.

What environmental ratings does this fixture have?
It is rated IP66 for water and dust protection, IK10 for impact resistance, and is suitable for wet locations and marine outside type environments.

What certifications does this fixture carry?
This fixture is UL 844, UL 1598, UL 1598A, ABS, ETL, and NSF listed. It is rebate eligible.

What mounting method is supported?
The fixture mounts using a 3/4 inch NPT pendant.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.