100 Watt Round Explosion Proof LED Light | 14000 Lumens | Class 1 Div 2 | 5000K | 100V-277V or 277V-480V

Product Overview

This is a 100 Watt round explosion proof LED light designed for hazardous locations. It delivers 14,000 lumens at 5000K color temperature and is suitable for use in environments requiring Class I Division 2, Class II Division 1 and 2, and Class III protection.

The fixture is built with a copper free aluminum housing and a tempered glass lens. It is IP66 and IK10 rated, providing resistance to dust, water, and impact. The fixture supports both 100V-277V and 277V-480V input ranges.

Standard beam angle is 120 degrees, with optional 40, 60, or 90 degree optics available. Dimming is supported via 1-10V controls. The fixture is gray in color and weighs 18.1 lbs.

Mounting options include yoke or 3/4 inch NPT pendant. The fixture is ETL listed and carries multiple hazardous location certifications.

Where This Product Fits Best

This explosion proof LED light is intended for use in hazardous locations where flammable gases, vapors, or combustible dusts may be present. It is suitable for industrial environments such as chemical plants, refineries, paint shops, and grain processing facilities.

The fixture is also rated for marine outside type environments and wet locations, making it appropriate for outdoor or exposed installations where weather and moisture are factors.

With a 50,000 hour L70 lifespan and robust construction, this fixture is suited for areas where maintenance access is limited or where reliability is critical.

It is designed to replace 400W metal halide fixtures in hazardous and demanding environments.

Performance and Functional Considerations

The fixture outputs 14,000 lumens at 140 lumens per watt, providing high efficacy for hazardous location lighting. The 5000K color temperature delivers a daylight white appearance, supporting visibility in industrial settings.

Beam angle options allow for adjustment of light distribution to suit specific area coverage needs. The tempered glass lens and copper free aluminum housing contribute to durability and chemical resistance.

Power factor is greater than 0.95 and total harmonic distortion is less than 10%, supporting stable operation on industrial electrical systems. Surge protection is rated at 10kV.

The fixture operates in ambient temperatures from -40°F to 140°F, supporting use in both cold storage and high heat process areas.

Installation and Long-Term Use

Mounting can be accomplished using either a yoke bracket or a 3/4 inch NPT pendant, providing flexibility for ceiling, wall, or pendant installations. The fixture dimensions are 14.56 by 11.4 inches and the weight is 18.1 lbs.

The IP66 rating allows for installation in locations exposed to dust and high-pressure water. IK10 impact rating supports use in areas where physical contact or vibration is expected.

Voltage compatibility covers both 100V-277V and 277V-480V systems, allowing integration into a range of industrial power infrastructures. Frequency range is 50-60Hz.

Long-term use is supported by a 50,000 hour L70 rated lifespan and a 5 year warranty from LED Lighting Supply.

How This Fixture Is Commonly Used

Once installed, this explosion proof LED light provides consistent illumination in hazardous areas where safety and compliance are required. The fixture can be dimmed using 1-10V controls if desired, allowing adjustment of light levels to match operational needs.

Beam angle selection at the time of installation determines the spread and focus of the light. The fixture remains sealed and protected against dust, water, and impact throughout its service life.

Operators rely on this fixture for dependable lighting in environments where exposure to chemicals, dust, or moisture is routine. The robust housing and lens minimize the need for maintenance or replacement due to environmental wear.

Routine cleaning and inspection can be performed without compromising the fixture's hazardous location ratings, provided the enclosure remains intact.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is certified for UL 844 Hazardous Locations, including Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III.

UL 1598 and UL 1598A certifications confirm suitability for wet locations and marine outside type environments. The fixture is ABS certified.

ATEX and IECEx markings are present for applicable hazardous area requirements. The fixture is IP66 rated for dust and water ingress and IK10 rated for impact resistance.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage ranges are supported?

This fixture supports 100V-277V or 277V-480V input.

What is the lumen output?

The fixture delivers 14,000 lumens.

What environmental ratings does this fixture carry?

This fixture is IP66 and IK10 rated.

What mounting options are available?

Mounting can be done with a yoke or 3/4 inch NPT pendant.

What certifications does this fixture have?

This fixture is ETL listed and carries UL 844, UL 1598, UL 1598A, ABS, ATEX, and IECEx certifications.

What is the warranty period?

LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.