Skip to content

15+ Years of Lighting Commercial, Industrial, and Sports Projects

90 Watt Round High Temperature Explosion Proof LED Light | 9900 Lumens | Class 1 Div 1 | 5000K | 120V or 277V | Rated to 212F

SKU: MLLG-E-EXPLC-90-50-C1D1-HT100 Web ID: 2791
Starting at: $1,532.00
Built to Order 6 Weeks

This 90W fixture is well suited to hazardous and high-temperature installations, with UL 844 classifications across Class I, II, and III locations and operation from -40F to 212F. Its 9,900-lumen, 120-degree distribution can provide broad illumination while replacing a 250W metal halide. IP66 protection, wet-location and marine suitability, copper-free aluminum housing, and yoke or 3/4 in NPT pendant mounting make it practical for paint booths, industrial process areas, and marine environments.

Dwayne Kula | President, CTO and Founder

Product Specifications

UL Listed - Verified for Electrical Safety and PerformanceClass 1 Division 1 - UL844 Certified for Hazardous LocationsClass 1 Division 2 - UL844 Certified for Explosive Atmospheres5 Year Unlimited Usage Warranty

UL Specs

  • UL 844 Hazardous Locations
  • Class I, Division 1, Groups C,D
  • Class I, Division 2, Groups A, B, C, D
  • Class II, Division 1, Groups E, F, G
  • Class II, Division 2, Groups F, G
  • Class III
  • UL 1598 Suitable for Wet Locations
  • UL 1598A Marine Outside Type
  • ABS
  • Driver on Board (DOB) Design

Key Features

BrandLED Lighting Supply
Watts90
Lumens9900
Lumens Per Watt110
Replaces250 Watt Metal Halide
Voltage120V or 277V
Color Temperature5000K
CRI70+
DimmingNo
Beam Angles (Std)120°
OpticsTempered Glass Lens
Lifespan50,000 (L70) hours
MountingYoke or 3/4 in NPT Pendant
Fixture ColorGray
Frequency (Hz)50/60
Power Factor>.95

Durable Construction

HousingCopper Free Aluminum
IP RatingIP66
Operating Temperature-40°F to 212°F
CertificationsUL
Warranty5 years

Measurements

Dimensions (in)16 X 13.5
Weight (lbs)39

Product Lighting Layout Estimator

Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.

Project Inputs

Loading fixture information...

Estimated Results

Fixtures --
Layout --
Estimated Avg FC --
Approx. Spacing --
Fixture Offset --
Calculation Method: --
Top-Down Fixture Layout Fixture positions and estimated floor light levels
Lower estimated FC Near target Higher estimated FC

Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.

Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.

Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.

Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.

Need Verified Light Levels?

This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.

Estimator Version 2.9.21

Product Overview

This 90 watt round LED high temperature explosion proof light delivers 9,900 lumens at 5000K with a 120 degree beam angle. It is built for high-heat industrial environments and operates from -40 degrees F to 212 degrees F.

The fixture is available in 120V or 277V configurations and is non-dimming. Its hazardous-location classifications support use where the applicable Class, Division, and Group requirements match the fixture ratings.

Core Performance and Output

The 90 watt LED light produces 9,900 lumens at 110 lumens per watt and is identified as a replacement for 250 watt metal halide fixtures. The 5000K color temperature and 70+ CRI provide a cool white output for industrial work areas.

A tempered glass lens protects the optical assembly, while the 120 degree beam distribution provides broad illumination from the round fixture.

Longevity and Reliability

This fixture has a 50,000-hour L70 rated life and a 5-year warranty. Its IP66 rating, copper-free aluminum housing, and operating temperature range of -40 degrees F to 212 degrees F support demanding high-temperature installations.

Build Quality and Physical Characteristics

The gray copper-free aluminum fixture measures 16 x 13.5 inches and weighs 39 pounds. It uses a driver-on-board design and includes a tempered glass lens.

Where This Product Fits Best

This high-temperature fixture is suited to industrial areas where elevated ambient temperatures and hazardous-location classifications are part of the lighting requirement.

  • high temperature facility lighting
  • industrial furnace area lighting
  • steel mill lighting
  • foundry lighting
  • power plant and energy site lighting
  • kiln lighting
  • glass manufacturing lighting
  • boiler room lighting

Installation and Long-Term Use

The fixture can be installed with a yoke mount or a 3/4 inch NPT pendant mount. Select the mounting method and supply voltage configuration appropriate for the installation.

Safety, Certifications, and Warranty

This fixture is UL 844 rated for hazardous locations: Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 1, Groups E, F, and G; Class II, Division 2, Groups F and G; and Class III.

It is also UL 1598 suitable for wet locations, UL 1598A Marine Outside Type, and ABS rated. The fixture carries a 5-year warranty.

Frequently Asked Questions

Q: What mounting options are available for this high temperature explosion proof light?

A: This 90 watt high temperature explosion proof light can be mounted with a yoke or a 3/4 inch NPT pendant mount.

Q: What ambient temperature range can this fixture operate in?

A: This high temperature LED fixture is rated for operation from -40 degrees F to 212 degrees F.

Web ID: 2791

You may also like