50 Watt LED High Temperature Light | 7500 Lumens | 5000K | 100-277V | Rated to 302F

Product Overview

This 50 watt LED high temperature fixture delivers 7500 lumens at 5000K and operates in ambient conditions from -40°F to 302°F. The fixture replaces 250 watt metal halide systems and runs on 100-277V input at 50/60 Hz.

The design separates the LED head from the driver to handle extreme heat. The external driver mounts up to 68 feet away from the fixture head and must be installed where temperatures stay below 212°F. A 5-meter (15 ft) cord is included as standard.

The aluminum alloy housing measures 12 x 10.5 x 2.5 inches and weighs 11 lbs. A tempered glass lens protects the LEDs, and the fixture includes 6kV surge protection. Mounting options include eye-hook, pendant, or yoke configurations.

Where This Product Fits Best

This fixture is built for locations where standard LED high bays cannot survive. Foundries, forges, glass plants, kiln rooms, and industrial ovens represent the primary applications where ambient temperatures reach levels that destroy conventional fixtures.

The 302°F maximum operating temperature and IP66 rating make this suitable for washdown areas in food processing, steel mills, and heavy manufacturing where radiant heat and moisture are constant factors. Cold storage facilities down to -40°F are equally supported.

The external driver requirement means installation planning must account for a protected location within 68 feet of the fixture head. This is standard practice in high-heat environments where electronics cannot survive at the fixture mounting point.

Performance and Functional Considerations

At 150 lumens per watt, this fixture produces 7500 lumens from 50 watts. The 120-degree beam angle provides broad coverage without secondary optics. CRI is 75+, appropriate for industrial task areas where color accuracy is secondary to durability and output.

The 100-277V universal voltage range with greater than 0.95 power factor and less than 15% THD allows connection to standard commercial and industrial electrical systems. The fixture does not dim.

Rated lifespan is 100,000 hours at L70, meaning the fixture maintains at least 70% of initial output through that period. In high-temperature applications, this lifespan depends on keeping the external driver within its 212°F limit.

Installation and Long-Term Use

The fixture head mounts via eye-hook, pendant, or yoke. The aluminum alloy construction and 11 lb weight are manageable for single-person installation in most configurations. The silver finish is standard.

Driver placement is the critical installation decision. The driver must remain below 212°F, which typically means mounting it outside the high-heat zone or in a protected enclosure. The included 15 ft cord handles most configurations, with the option to extend up to 68 feet total separation.

IP66 rating means the fixture tolerates high-pressure water jets and complete dust exclusion. This supports direct washdown cleaning in food processing and similar environments without fixture damage.

How This Fixture Is Commonly Used

Facility operators typically install this fixture in areas where previous LED attempts failed due to heat. The external driver design is the functional difference. You position the fixture head where light is needed, then route the cord to a location where the driver stays cool enough to survive.

The three mounting options let you adapt to existing infrastructure. Eye-hook works for chain or cable suspension. Pendant mounting suits conduit drops. Yoke mounting handles rigid attachment to structure or equipment.

Day-to-day, this is a fixed-output fixture. There is no dimming, no switching between wattages, and no field adjustments to light level. Output is 7500 lumens at 5000K continuously when powered.

Safety, Certifications, and Warranty

This fixture is ETL listed. The IP66 rating provides protection against dust ingress and high-pressure water. Surge protection is rated at 6kV.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What is the maximum ambient temperature this fixture can handle?
The fixture head operates up to 302°F. The external driver must stay below 212°F.

What wattage metal halide does this replace?
This 50 watt LED fixture replaces 250 watt metal halide.

What voltage does this fixture require?
The fixture operates on 100-277V at 50/60 Hz.

Is this fixture dimmable?
No, this fixture does not dim.

How far can the driver be mounted from the fixture?
The driver can be mounted up to 68 feet from the fixture head. A 15 ft cord is included.

What is the warranty?
This fixture carries a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.