200 Watt LED High Temperature Light | 26000 Lumens | 5000K | 100V-277V or 347V-480V | Rated to 194F

Product Overview

The 200 Watt LED High Temperature Light is engineered for continuous operation in environments where ambient temperatures reach up to 194°F (90°C). This fixture is designed for high bay mounting in industrial settings where standard LED lights fail due to heat exposure. Typical installations include power generation plants, steel mills, foundries, and nuclear facilities where elevated temperatures are routine and reliability is critical.

This model features a sealed aluminum alloy housing and polycarbonate lens, supporting both eye-hook and pendant mounting. The fixture is suitable for mounting heights between 18 and 35 feet, replacing legacy 400W metal halide units in high temperature zones.

Core Performance and Output

This fixture delivers 26,000 lumens at 200 watts, achieving 130 lumens per watt. The output is consistent across the full rated temperature range, with no onboard dimming. Multiple beam angle options (10°, 25°, 40°, 90°, 120°) allow for tailored distribution, from focused task lighting to wide-area coverage. Color temperature is available in 4000K or 5000K, with a CRI above 80 for accurate color rendering in industrial environments.

Power factor exceeds 0.95 and THD remains below 15%, supporting stable operation on both 100-277V and 347-480V circuits. At mounting heights below 18 feet, output may be excessive and increase glare. Wider beam angles at higher mounting heights can reduce uniformity if not spaced appropriately.

Adjustability and Control Options

This fixture is supplied without onboard dimming or integrated controls. Output is fixed at full power. Beam angle selection is available at the time of installation, allowing for field adjustment to match the lighting pattern required by the application.

No motion sensors or daylight harvesting options are included. Control must be managed at the circuit or panel level. This approach is typical for high temperature environments where electronic controls are prone to failure.

Longevity and Reliability

The fixture is rated for 70,000 hours of operation at full output in ambient temperatures up to 194°F. The sealed housing and passive thermal management prevent dust and moisture ingress, supporting long-term reliability in harsh industrial settings.

All components are selected for high temperature endurance. No active cooling or fans are used, eliminating moving parts that could fail under thermal stress. The fixture maintains consistent performance throughout its rated life when installed within the specified temperature range.

Build Quality and Physical Characteristics

The housing is constructed from corrosion-resistant aluminum alloy with a gray finish. The lens is impact-resistant polycarbonate, sealed to IP66 for protection against water and dust. The fixture measures 18.11 x 14.17 x 8.65 inches and weighs 24.6 lbs.

Mounting options include eye-hook and pendant configurations, supporting secure installation in overhead structures. The fixture is designed for vertical orientation and is not intended for wall or surface mounting. All hardware is specified for high temperature operation.

Where This Product Fits Best

This fixture is intended for continuous use in industrial environments with sustained high ambient temperatures. It is suitable for facilities where standard LED or HID fixtures experience premature failure due to heat exposure. The design supports both new construction and retrofit projects in heavy industrial settings.

• high temperature facility lighting
• power plant and energy site lighting
• nuclear facility lighting
• steel mill lighting
• foundry lighting
• industrial furnace area lighting
• kiln lighting
• glass manufacturing lighting

All installations must ensure ambient temperatures do not exceed 194°F. The fixture is IP66 rated for dust and water ingress, but not intended for direct washdown or corrosive chemical exposure.

Installation and Long-Term Use

Mounting is performed using either the supplied eye-hook or pendant hardware. The fixture is designed for overhead suspension from structural steel, pipe, or unistrut. Electrical connection supports both standard (100-277V) and high voltage (347-480V) circuits, with no external driver required.

Routine maintenance is limited to periodic inspection for dust accumulation on the lens. No relamping or internal servicing is required. The fixture is not field-serviceable beyond basic cleaning and hardware checks. All wiring and mounting must comply with local codes and high temperature installation practices.

How This Fixture Is Commonly Used

Typical mounting heights range from 18 to 35 feet, depending on the beam angle and required light levels. Spacing is determined by the selected optic and the uniformity requirements of the facility. In power plants and steel mills, fixtures are often spaced to provide overlapping coverage in process areas and walkways.

Higher output allows for reduced fixture count in large open areas, but may increase glare if installed too low or with narrow optics. Layouts should account for heat sources and airflow patterns to avoid localized overheating.

Safety, Certifications, and Warranty

This fixture is ETL listed and rated to IP66 for dust and water ingress. All components are specified for continuous operation at ambient temperatures up to 194°F. The product is supplied with a 5-year warranty covering manufacturing defects and thermal performance within rated conditions.

No hazardous location or food safety certifications are included. The fixture is intended for dry or damp industrial environments, not for direct chemical washdown or explosive atmospheres.

Frequently Asked Questions

Q: What is the maximum ambient temperature this fixture can operate in?

A: The fixture is rated for continuous operation in environments up to 194°F (90°C).

Q: Can this fixture be dimmed or controlled with motion sensors?

A: No, this fixture does not support dimming or integrated controls. Output is fixed at full power.

Q: What mounting options are available?

A: Eye-hook and pendant mounting are supported. The fixture is designed for overhead suspension only.

Q: Is this fixture suitable for washdown or corrosive environments?

A: The fixture is IP66 rated for dust and water ingress, but not intended for direct washdown or corrosive chemical exposure.

Q: How should I plan fixture spacing for uniform coverage?

A: Spacing depends on mounting height, beam angle, and required light levels. Narrow optics allow for greater spacing, while wide optics may require closer placement for uniformity.

Application Questions and Clarification

Q: Is this fixture appropriate for standard warehouse or gymnasium lighting?

A: No, this fixture is designed specifically for high temperature industrial environments and is not intended for standard warehouse or gymnasium use.

Q: Can this fixture be used in food processing or hazardous locations?

A: No, this fixture does not carry food safety or hazardous location certifications. It is intended for high temperature industrial areas only.