100 Watt LED High Temperature Light | 13000 Lumens | 5000K | 100V-277V or 277-480V | Rated to 176F

Product Overview

This 100 Watt LED High Temperature Light is engineered for continuous operation in environments where ambient temperatures reach up to 176°F (80°C). The fixture is designed for high bay mounting in industrial facilities where heat, dust, and airborne contaminants are present. Typical installations include power generation plants, steel mills, and nuclear facilities where standard LED fixtures cannot maintain performance or lifespan.

The fixture uses a die-cast aluminum housing and polycarbonate lens to withstand thermal cycling and physical impacts. It is suitable for mounting heights commonly found in furnace areas, foundries, and energy sites, replacing legacy 250W metal halide units with improved reliability and lower maintenance requirements.

Core Performance and Output

This fixture delivers 13,000 lumens at 130 lumens per watt, providing high-output illumination for large, high-temperature spaces. The 5000K color temperature supports visual clarity in industrial process areas. The standard 110° beam angle offers broad coverage, with optional 30°, 90°, or 150° optics for targeted or wide-area distribution as needed.

Electrical performance is stable across 100-277V or 277-480V input, with a power factor of 0.95 and THD below 20%. Excessive output may occur at mounting heights below 15 feet, and uniformity may decrease at heights above 30 feet without proper layout. The fixture is non-dimming and designed for continuous, full-output operation in high-heat environments.

Adjustability and Control Options

This model does not include dimming or integrated controls. Output is fixed for maximum reliability in high-temperature conditions. Beam angle can be specified at order using interchangeable optics to match the lighting pattern to the application.

Mounting options include eye-hook for pendant suspension or trunnion for surface or wall mounting. Both methods allow for basic aiming adjustment during installation. No onboard sensors or networked controls are included due to the fixture?s high-temperature rating and application focus.

Longevity and Reliability

The fixture is rated for 100,000 hours (L70) at maximum ambient temperature, minimizing maintenance cycles in areas where access is difficult or hazardous. The die-cast aluminum housing and polycarbonate lens provide resistance to thermal shock, impact, and vibration.

12kV surge protection is integrated to protect against electrical disturbances common in industrial power systems. The fixture maintains full output and structural integrity across the entire -40°F to 176°F operating range. No fan or active cooling is used, eliminating moving parts that could fail in high-heat environments.

Build Quality and Physical Characteristics

The fixture measures 12.1 in x 14.4 in x 9.6 in and weighs 17.2 lbs. The housing is die-cast aluminum with a gray finish, designed for both heat dissipation and corrosion resistance. The polycarbonate lens is impact rated to IK10, suitable for locations with mechanical hazards or airborne debris.

Ingress protection is IP66, supporting installation in areas exposed to dust, water spray, or washdown. All hardware and seals are specified for high-temperature operation. The fixture is designed for vertical or horizontal mounting using the supplied eye-hook or trunnion bracket.

Where This Product Fits Best

This fixture is intended for continuous use in industrial environments where ambient temperatures regularly exceed the limits of standard LED lighting. It is suitable for process areas, heavy manufacturing, and energy sector facilities where reliability and safety are critical.

• high temperature facility lighting
• power plant and energy site lighting
• nuclear facility lighting
• industrial furnace area lighting
• steel mill lighting
• foundry lighting
• kiln lighting
• boiler room lighting

The fixture is resistant to dust, water, and mechanical impact. It is not suitable for hazardous (classified) locations or environments requiring explosion proof certification.

Installation and Long-Term Use

Mounting is performed using either the included eye-hook for pendant suspension or the trunnion bracket for surface or wall attachment. The fixture?s weight and size require secure mounting to structural steel or concrete. All wiring must be rated for high-temperature environments and installed per local code.

Routine maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. No relamping or internal servicing is required during the rated lifespan. The fixture is designed for minimal intervention in areas where access is restricted or hazardous due to heat or process operations.

How This Fixture Is Commonly Used

Typical mounting heights range from 15 to 30 feet, depending on the application and required light levels. Spacing is determined by the selected beam angle and the size of the area to be illuminated. In furnace areas and foundries, fixtures are often spaced to provide overlapping coverage and minimize shadowing.

Higher output allows for reduced fixture count in large open bays, but may increase glare if installed too low. Layouts should account for heat sources, airflow, and obstructions to maintain uniform illumination and fixture longevity.

Safety, Certifications, and Warranty

This fixture is ETL certified. It is rated IP66 for dust and water ingress and IK10 for impact resistance. Surge protection is rated to 12kV. The operating temperature range is -40°F to 176°F.

A 5-year warranty covers the fixture for defects in materials and workmanship under normal operating conditions. All components are specified for continuous use in high-temperature industrial environments.

Frequently Asked Questions

Q: What is the maximum ambient temperature this fixture can operate in?

A: The fixture is rated for continuous operation in environments up to 176°F (80°C).

Q: What mounting options are available?

A: The fixture can be installed using either an eye-hook for pendant mounting or a trunnion bracket for surface or wall mounting.

Q: Is this fixture dimmable or compatible with controls?

A: No, this model is non-dimming and does not support integrated controls due to its high-temperature application focus.

Q: What is the recommended mounting height for optimal performance?

A: Typical mounting heights are between 15 and 30 feet, depending on the required light levels and beam angle selection.

Q: How should fixtures be spaced in a high-temperature facility?

A: Spacing depends on the beam angle and area size. Narrower optics allow for greater spacing, while wide optics may require closer placement for uniform coverage.

Application Questions and Clarification

Q: Can this fixture be used in hazardous (classified) locations?

A: No, this fixture is not rated for hazardous or explosion proof environments.

Q: Is this fixture suitable for use in boiler rooms or kiln areas?

A: Yes, the fixture is designed for continuous use in boiler rooms, kiln areas, and other high-temperature industrial spaces.

Q: Does the fixture require special wiring for high-temperature environments?

A: All wiring should be rated for the maximum ambient temperature and installed according to local electrical codes for high-heat areas.

Q: What certifications does this fixture carry?

A: The fixture is ETL certified, IP66 rated, and IK10 rated.