200 Watt LED Food Grade Light | 30400 Lumens | 5000K | 100-277V | NSF Rated

Product Overview

This 3-foot adjustable LED indirect high bay light delivers field-selectable output at 180, 240, or 300 watts, producing 25,200 to 42,000 lumens at 140 lumens per watt. The indirect optical design uses a frosted polycarbonate lens with a 90-degree beam angle to distribute light upward, reducing harsh direct glare in the workspace below.

Color temperature is selectable between 4000K and 5000K, allowing the fixture to be configured for the lighting character needed in the space. The fixture operates on 100-277V input at 50/60 Hz and supports 0-10V dimming. A 3-foot suspension mount is included with the fixture.

At 35.4 inches long, 11.5 inches wide, and 2 inches deep, this fixture weighs 7.3 pounds. The white housing is designed for chain or cable mounting in applications where indirect uplighting is preferred over direct downlight distribution.

Where This Product Fits Best

This indirect high bay is designed to replace 250-watt or 400-watt metal halide fixtures in spaces where softer, diffused lighting is preferred over direct high bay illumination. The upward-facing optical design bounces light off ceilings or structures, reducing shadows and minimizing direct glare for workers below.

The operating temperature range of -22°F to 122°F supports use in conditioned and unconditioned indoor environments, including cold storage entries, manufacturing floors, and warehouses with seasonal temperature swings. The 100-277V input covers standard commercial and industrial electrical systems without requiring transformers.

Indirect fixtures are typically selected for spaces with reflective ceilings, open truss structures, or work areas where visual comfort takes priority over maximum downward punch. Offices within industrial buildings, inspection areas, and retail warehouse environments are common applications for this optical approach.

Performance and Functional Considerations

The three-position wattage switch allows output to be set at installation based on ceiling height, reflectance, and target light levels. At 140 lumens per watt across all settings, efficiency remains consistent whether the fixture is configured to 180W, 240W, or 300W.

The 80+ CRI rating supports accurate color rendering for general industrial tasks, inventory identification, and workspace visibility. The selectable 4000K and 5000K color temperatures allow matching to existing fixtures or establishing a consistent appearance across new installations.

The 0-10V dimming input provides compatibility with standard dimming controls and building management systems. The frosted polycarbonate lens diffuses output to reduce visible point sources when viewing the fixture indirectly from below.

Installation and Long-Term Use

The fixture ships with a 3-foot suspension mount for chain or cable hanging. No power cord is included, so hard-wired connections are required at installation. The 7.3-pound weight is manageable for single-person installation in most lift-accessible locations.

Wattage and color temperature selections are made at the fixture before final mounting. Once configured, the fixture operates without ongoing adjustment unless lighting requirements change. The 150,000-hour L70 rated lifespan supports extended service intervals in facilities with limited maintenance access or high labor costs for relamp events.

The operating temperature range allows installation in environments that cycle between cold and warm conditions without fixture derating or reduced lifespan.

How This Fixture Is Commonly Used

After installation, the primary interaction with this fixture is through connected dimming controls. Facilities using 0-10V dimming systems can adjust output levels based on occupancy, daylight availability, or task requirements without accessing the fixture itself.

The wattage and color temperature settings are fixed at installation. If lighting needs change?such as converting a space from storage to active work?the wattage can be adjusted at the fixture by accessing the selector switch. This avoids full fixture replacement when operational requirements shift.

The indirect optical design means light reaches the work plane after reflecting off ceiling surfaces. Spaces with white or light-colored ceilings will see better utilization of output than those with dark or exposed structural ceilings. Maintenance personnel should account for ceiling surface condition when evaluating light level performance over time.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified. The 5-year warranty is provided by LED Lighting Supply.

The operating temperature rating of -22°F to 122°F defines the ambient conditions under which the fixture is designed to operate within its rated lifespan and performance specifications.

Frequently Asked Questions

What wattage options are available?
The fixture is field-adjustable to 180, 240, or 300 watts using an onboard selector switch.

What voltage does this fixture require?
The fixture operates on 100-277V input at 50/60 Hz.

Is this fixture DLC listed for utility rebates?
Yes, this fixture is DLC Premium qualified.

What metal halide wattage does this replace?
This fixture is designed to replace 250-watt or 400-watt metal halide high bays.

What is the warranty coverage?
LED Lighting Supply provides a 5-year warranty on this fixture.

Does this fixture include a power cord?
No, the fixture does not include a power cord and requires hard-wired installation.

What color temperatures are available?
The fixture is selectable between 4000K and 5000K.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.