200 / 240 / 300 Watt LED Food Grade UFO Light | 30000 to 45000 Lumens | 3000K / 4000K / 5000K | 100-277V | NSF Rated

Product Overview

This 200 watt LED food grade light delivers 30,400 lumens at 5000K with a color rendering index of 80 or higher. The fixture operates on 100-277V input at 50 or 60 Hz and replaces 400 watt metal halide systems. Efficacy is 152 lumens per watt.

The housing is die-cast aluminum with a white finish and polycarbonate lens. The fixture measures 17 by 7.7 inches and weighs 18 pounds. A 120-degree beam angle provides broad light distribution from the standard optics.

This fixture carries an NSF rating for food grade environments. It is UL listed and DLC Premium qualified. The rated lifespan is 60,000 hours at L70.

Where This Product Fits Best

This fixture is built for food processing, food packaging, and food storage areas where NSF-rated lighting is required. The IP66 rating allows exposure to high-pressure washdown and heavy moisture without compromising the enclosure. Operating temperature range spans -40°F to 113°F, supporting cold storage and refrigerated processing environments as well as warmer production areas.

The IK08 impact rating provides resistance to moderate physical contact from equipment, product handling, or personnel traffic. Die-cast aluminum housing and polycarbonate lens construction support long-term use in demanding sanitary environments where fixtures are subject to cleaning chemicals, temperature swings, and mechanical stress.

Performance and Functional Considerations

At 30,400 lumens and 200 watts, this fixture delivers output equivalent to a 400 watt metal halide while drawing half the power. The 5000K color temperature produces a cool white light appropriate for inspection tasks and visibility in food handling areas. CRI of 80 or higher supports accurate color recognition of products and packaging.

The 120-degree beam angle from the polycarbonate optics spreads light broadly, reducing the need for tight fixture spacing in open production floors or storage bays. Power factor is 0.93 with total harmonic distortion capped at 20 percent.

Dimming is available via 1-10V control for integration with building management systems or manual dimmers where output adjustment is needed.

Installation and Long-Term Use

Mounting is via eye-hook, which supports suspension from chain, cable, or threaded rod in ceiling structures. The fixture weighs 18 pounds, so mounting hardware and support structure must be rated accordingly.

The 100-277V input range accommodates standard commercial and industrial electrical systems without requiring dedicated transformers. The IP66 enclosure seals against dust ingress and direct water jets, allowing the fixture to remain in place during washdown procedures.

Rated lifespan of 60,000 hours at L70 reduces relamping frequency compared to legacy metal halide systems. The die-cast aluminum body dissipates heat effectively and resists corrosion in wet and chemically active environments.

How This Fixture Is Commonly Used

In food processing plants, this fixture hangs above production lines, conveyor systems, and packaging stations where consistent light levels and cleanability are both required. The NSF rating allows it to be specified in areas where food safety inspectors require compliant equipment.

Facilities with cold storage or freezer environments use this fixture because it starts and operates normally down to -40°F without warmup delays. The 1-10V dimming capability allows output to be reduced during off-shift periods or adjusted to match task requirements in specific zones.

Maintenance teams working in these environments can perform washdowns without removing or covering the fixture. The white housing finish improves visibility of surface contamination during cleaning inspections.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. It carries an NSF rating for food grade applications.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100-277V input at 50 or 60 Hz.

What does the NSF rating mean for this fixture?
The NSF rating confirms this fixture is approved for use in food processing and food handling environments where sanitation requirements apply.

Is this fixture eligible for utility rebates?
This fixture is DLC Premium qualified.

Can this fixture be used in cold storage or freezer areas?
Yes. The operating temperature range is -40°F to 113°F.

What is the IP rating?
IP66. The fixture is sealed against dust and protected against high-pressure water jets.

How is this fixture mounted?
Mounting is via eye-hook for suspension.

What is the warranty coverage?
This fixture includes a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.