150 Watt LED Food Grade Light | 22500 Lumens | 5000K | 100-277V | NSF Rated

Product Overview

This adjustable UFO high bay delivers 16,000 to 30,000 lumens through field-selectable wattage settings of 80, 100, 120, or 150 watts. The fixture operates at 200 lumens per watt and produces 5000K color temperature with a CRI of 80 or higher. It replaces 400-watt metal halide fixtures.

The die-cast aluminum housing measures 14.7 by 7.32 inches and weighs 12 pounds. A 5-foot power cord and 8-inch dimming cord are included. The fixture is black and mounts using an eye-hook. Standard beam angle is 120 degrees, with optional 60-degree and 90-degree optics available.

Voltage input ranges from 100V to 277V at 50 or 60 Hz. Power factor is 0.90 with total harmonic distortion at 20 percent maximum. The driver supports 1-10V dimming. This fixture is ETL listed and DLC Premium qualified.

Where This Product Fits Best

This high bay is built for industrial and commercial spaces where metal halide systems are being phased out. The 400-watt metal halide replacement rating positions it for warehouses, manufacturing floors, distribution centers, and similar high-ceiling environments running legacy HID lighting.

The IP65 rating allows installation in areas exposed to dust accumulation and washdown or spray conditions. The IK08 rating provides resistance to moderate physical impact from equipment movement or overhead activity. Operating temperature range of -22 degrees F to 122 degrees F supports both cold storage and high-ambient environments.

Voltage compatibility from 100V to 277V covers most North American commercial and industrial electrical systems without requiring transformer modifications.

Performance and Functional Considerations

Field-adjustable wattage allows the fixture to be configured at 80, 100, 120, or 150 watts after installation. Each setting corresponds to a specific lumen output: 16,000 lumens at 80 watts, 20,000 lumens at 100 watts, 24,000 lumens at 120 watts, and 30,000 lumens at 150 watts. This allows output to be matched to actual site conditions rather than being fixed at the point of installation.

The 200 lumens per watt efficacy remains consistent across all wattage settings. The standard 120-degree beam angle provides broad coverage, while optional 60-degree and 90-degree optics narrow the distribution for higher mounting heights or aisle-oriented layouts. Optics use a polycarbonate lens.

Rated lifespan is 134,000 hours at L70, meaning the fixture will maintain at least 70 percent of initial lumen output through that period. Built-in 4kV surge protection guards the driver against transient voltage events common in industrial electrical environments.

Installation and Long-Term Use

The eye-hook mounting method accommodates pendant or chain suspension. The 5-foot power cord provides working distance from junction boxes or conduit drops. The separate 8-inch dimming cord connects to 1-10V control circuits when dimming integration is required.

At 12 pounds, the fixture is manageable for single-technician installation in most lift-accessible applications. The die-cast aluminum housing dissipates heat effectively and resists corrosion in environments with airborne particulates or moisture exposure consistent with IP65 conditions.

A motion sensor is available for this fixture. Sensor configuration requires a remote control, and one remote per project is needed to adjust settings from defaults.

How This Fixture Is Commonly Used

Facility operators typically set the wattage based on mounting height and task visibility requirements. In spaces where lighting needs vary by zone, different fixtures in the same installation can be configured to different output levels to match the work being performed below.

The 1-10V dimming input connects to building automation systems or standalone dimmers when output needs to be reduced beyond the wattage selector range. Dimming is often used during partial-shift operations or in areas with significant daylight contribution.

Beam angle selection happens before or during installation. Facilities with narrow aisles or rack systems often benefit from the optional 60-degree or 90-degree optics to concentrate light downward rather than spreading it across the full 120-degree standard pattern.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified. The IP65 rating confirms protection against dust ingress and water jets from any direction. The IK08 rating confirms resistance to impacts equivalent to everyday mechanical contact in active work environments.

Surge protection is rated at 4kV. Operating temperature range spans -22 degrees F to 122 degrees F. We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What wattage options are available?
The fixture can be set to 80, 100, 120, or 150 watts. Each wattage corresponds to a specific lumen output ranging from 16,000 to 30,000 lumens.

What voltage does this fixture require?
It operates on 100V to 277V input at 50 or 60 Hz.

Is this fixture DLC listed?
Yes, this fixture is DLC Premium qualified.

What is the IP rating?
The fixture carries an IP65 rating, allowing use in dusty environments and areas subject to water spray.

What beam angles are available?
Standard beam angle is 120 degrees. Optional 60-degree and 90-degree optics are available.

Does this fixture support dimming?
Yes, the fixture supports 1-10V dimming through the included 8-inch dimming cord.

What is the warranty period?
We provide a 5-year warranty on this fixture.

What mounting method does this fixture use?
The fixture mounts using an eye-hook for pendant or chain suspension.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.