35 Foot Fiberglass Flag Pole | 7 Inch Base Diameter | Internal Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 35 Foot Fiberglass Flag Pole is designed for permanent outdoor flag display at commercial, municipal, and institutional sites. The pole features a 7-inch base diameter, internal halyard with cam cleat, and an anchor base for secure installation. Typical installations include facility entrances, government buildings, and corporate campuses where a 5x8 foot flag is standard.

The fiberglass construction offers a balance of strength and corrosion resistance, making it suitable for environments where steel or aluminum poles may be prone to rust or pitting. The pole is rated for 125 mph wind loads (unflagged) and weighs 97 lbs, supporting reliable long-term use in exposed locations.

Core Performance and Output

This pole is engineered for structural performance in wind-exposed environments. The 125 mph wind rating (unflagged) reflects the pole?s ability to withstand severe weather when installed with the specified anchor base and bolt pattern. The 7-inch ground-level diameter and 10.24 x 10.24 inch base provide a stable foundation for the 35-foot height.

The fiberglass material resists corrosion and does not conduct electricity, reducing maintenance in coastal or high-humidity areas. The pole supports a standard 5x8 foot flag and includes fittings for internal halyard operation. Excessive flag size or improper anchoring can reduce wind load capacity and long-term stability.

Adjustability and Control Options

The internal halyard system uses a #10 (5/16 inch) rope and an internal cam cleat for secure flag raising and lowering. The internal design reduces tampering and noise compared to external halyard systems. The stationary truck and gold ball top are included for standard flag display.

There are no electrical or remote control options. All adjustments are manual and performed at the base of the pole. The internal halyard system is suitable for locations where security and aesthetics are priorities.

Longevity and Reliability

The fiberglass construction provides long-term resistance to corrosion, UV exposure, and weathering. The pole is designed for outdoor use in a range of climates, including coastal and high-humidity regions. The 15-year warranty covers structural integrity under normal use and installation conditions.

Routine inspection of the halyard, cleat, and anchor bolts is recommended to maintain reliable operation. The pole?s non-conductive properties reduce risk in lightning-prone areas, but grounding of nearby equipment should still be considered as part of site safety planning.

Build Quality and Physical Characteristics

This pole measures 35 feet in total height with a 7-inch base diameter and 3-inch tip diameter. The white fiberglass finish is standard. The anchor base requires a 9-11 inch bolt circle with 3/4 inch diameter bolts (sold separately). The pole weighs 97 lbs, allowing for manageable handling during installation with proper equipment.

Included hardware consists of an internal cam cleat, stationary truck, gold ball top, one set of brass snaps with white vinyl covers, and a nylon cleat. The standard flag size is 5x8 feet. Anchor bolts and base cover are not included and must be sourced separately.

Where This Product Fits Best

This flag pole is suited for permanent flag display at commercial, municipal, and institutional properties. The 35-foot height and internal halyard system are commonly specified for prominent locations where durability, appearance, and security are required.

• flag display
• municipal flag installation
• commercial property flag mounting
• facility flag display
• government building flag display
• corporate facility flag display
• school flag installation
• stadium flag display

The fiberglass construction is appropriate for environments with high humidity, salt exposure, or where non-conductive materials are preferred. The anchor base design supports installation on concrete foundations or engineered pads.

Installation and Long-Term Use

Installation requires a prepared concrete base with a 9-11 inch bolt circle and 3/4 inch diameter anchor bolts (24 inches long, not included). The pole is set over the anchor bolts and secured with the included base hardware. Handling the 97 lb pole typically requires two or more personnel and lifting equipment for safe positioning.

Routine maintenance includes inspecting the halyard, cleat, and flag attachment hardware for wear. The internal halyard system minimizes vandalism and reduces maintenance compared to external systems. Periodic cleaning of the fiberglass surface maintains appearance and prevents buildup of contaminants in coastal or industrial areas.

How This Fixture Is Commonly Used

Typical mounting height is 35 feet above grade, with the pole installed on a concrete foundation using the anchor base. Spacing between flag poles is determined by site layout and flag size, with 5x8 foot flags as the standard for this pole height. The internal halyard allows for secure flag changes without external ropes or pulleys.

In multi-pole installations, uniform height and alignment are maintained for visual consistency. Using larger flags or exceeding the wind rating can increase stress on the pole and anchoring system, requiring careful consideration during planning.

Safety, Certifications, and Warranty

This product does not carry electrical or lighting certifications. The pole is structurally rated for 125 mph wind loads (unflagged) and includes a 15-year warranty covering material and workmanship. All installation and maintenance should follow manufacturer guidelines and local codes.

Fiberglass construction is non-conductive and corrosion resistant. Anchor bolts and base cover are not included and must be selected to match site requirements and wind load specifications.

Frequently Asked Questions

Q: What is the maximum flag size recommended for this pole?

A: The standard and recommended flag size for this 35 foot pole is 5x8 feet.

Q: What is the wind rating for this flag pole?

A: The pole is rated for 125 mph wind loads when unflagged.

Q: What type of foundation is required for installation?

A: A concrete foundation with a 9-11 inch bolt circle and 3/4 inch diameter anchor bolts (24 inches long) is required.

Q: Are anchor bolts and base cover included?

A: No, anchor bolts and base cover must be sourced separately.

Q: How often should the halyard and cleat be inspected?

A: Routine inspection is recommended at least annually, or more frequently in high-wind or high-use locations.

Q: Can this pole be used in coastal environments?

A: Yes, the fiberglass construction is suitable for coastal and high-humidity environments due to its corrosion resistance.

Q: How should spacing be determined for multiple flag poles?

A: Spacing depends on flag size and site layout; for 5x8 foot flags, allow sufficient distance to prevent flag interference and maintain visual alignment.

Application Questions and Clarification

Q: Is this pole appropriate for stadium flag display?

A: Yes, this pole is commonly used for stadium flag display when a 35 foot height and internal halyard are specified.

Q: Can this pole be installed at schools or government buildings?

A: Yes, this pole is suitable for school flag installation and government building flag display.

Q: Is the internal halyard system tamper-resistant?

A: The internal halyard system reduces tampering compared to external systems, but routine inspection is still recommended.

Q: What maintenance is required for long-term reliability?

A: Regular inspection of the halyard, cleat, and anchor bolts, along with periodic cleaning of the fiberglass surface, is recommended for long-term reliability.