39 Foot Total Height | 35 Foot Above Ground Fiberglass Flag Pole | 7 Inch Base Diameter | External Halyard | In Ground | Rated for 125 MPH

Product Overview

This fiberglass flag pole is designed for permanent in-ground installation at commercial, municipal, and institutional sites. The pole stands 39 feet in total height, with 35 feet above grade, and is engineered for external halyard operation. Typical installations include facility entrances, government buildings, and large campuses where a prominent flag display is required. The pole is supplied with a gold ball top, stationary truck, and all standard fittings for flag mounting and operation.

Fiberglass construction provides a non-conductive, corrosion-resistant solution suitable for outdoor environments. The 125 mph wind rating supports reliable performance in areas subject to high wind loads. The pole is finished in white and includes a 16-inch flash collar for a clean base transition at grade.

Core Performance and Output

This pole supports a standard 5 x 8 foot flag and is structurally rated for wind speeds up to 125 mph (flagged). The 7-inch base diameter and 115-pound weight provide stability for tall flag displays. The 8-inch inside diameter ground sleeve and 4-foot embedment depth ensure secure anchoring in soil or concrete.

Fiberglass construction delivers high strength-to-weight ratio and resists corrosion from moisture, salt, and chemicals. The pole?s flexibility under load reduces the risk of catastrophic failure in extreme wind events. Excessive flag size or mounting of additional equipment may exceed wind load capacity and is not recommended.

Adjustability and Control Options

This model uses an external halyard system with a #10 (5/16 inch) rope and nylon cleat for manual flag raising and lowering. The stationary truck at the top provides a fixed pulley point for the halyard. The included brass snaps with vinyl covers secure the flag to the halyard and minimize wear.

No internal halyard, winch, or locking system is provided. All adjustments are performed manually at the pole base. The external halyard is accessible for routine maintenance or replacement.

Longevity and Reliability

The fiberglass pole is engineered for long-term outdoor exposure, with a 15-year warranty against structural failure. The material resists UV degradation, corrosion, and impact from windborne debris. The white finish maintains appearance with minimal maintenance.

All included hardware is specified for outdoor use. The nylon cleat and brass snaps are resistant to weathering and corrosion. Routine inspection of halyard and fittings is recommended to maintain reliable operation over time.

Build Quality and Physical Characteristics

The pole measures 39 feet in total length, with a 7-inch outside diameter at the base and 3-inch tip diameter. The 115-pound weight allows for manageable handling during installation with appropriate equipment. The 8-inch ground sleeve and 16-inch flash collar are included for secure and finished installation.

The pole is supplied in white, with a gold ball top and stationary truck. All fittings are included for external halyard operation. The fiberglass construction is non-conductive and suitable for locations where electrical isolation is required.

Where This Product Fits Best

This fiberglass flag pole is suited for permanent flag display in outdoor environments where corrosion resistance, wind load performance, and non-conductivity are required. Typical installations include:

• flag display
• municipal flag installation
• commercial property flag mounting
• facility flag display
• school flag installation
• government building flag display
• stadium flag display
• corporate facility flag display

The pole is appropriate for open sites, building entrances, and campus settings. Fiberglass construction is preferred in coastal, high-humidity, or electrically sensitive environments.

Installation and Long-Term Use

Installation requires excavation for the 8-inch diameter ground sleeve, with a 4-foot embedment depth. The pole is set in the sleeve and secured at grade with the included flash collar. Handling and raising the pole may require mechanical assistance due to length and weight.

Routine maintenance includes inspection of the halyard, cleat, and flag attachment hardware. The external halyard system allows for easy replacement of worn components. The fiberglass surface can be cleaned with mild detergent and water as needed.

How This Fixture Is Commonly Used

This flag pole is typically installed at mounting heights of 35 feet above grade, supporting a single 5 x 8 foot flag. Spacing between poles is determined by site layout and visual requirements. Most installations use one pole per flag location, with additional poles for multi-flag displays at larger facilities.

Using higher poles or larger flags increases wind load and may require additional engineering review. The external halyard system is selected for ease of use and straightforward maintenance, but may be subject to tampering in unsecured locations.

Safety, Certifications, and Warranty

This product does not carry electrical or lighting certifications. The fiberglass construction is non-conductive and corrosion resistant. All hardware is specified for outdoor use and long-term durability.

The pole is covered by a 15-year structural warranty. No additional certifications are provided. Installation must comply with local codes and site requirements.

Frequently Asked Questions

Q: What is the maximum flag size supported by this pole?

A: The standard supported flag size is 5 x 8 feet.

Q: What is the wind rating for this flag pole?

A: The pole is rated for 125 mph wind speed with the standard flag installed.

Q: Is the halyard system internal or external?

A: This model uses an external halyard system with a nylon cleat.

Q: What is the required embedment depth for installation?

A: The ground sleeve is 4 feet long and must be fully embedded below grade.

Q: Can this pole be installed in coastal or high-humidity environments?

A: Yes, fiberglass construction is suitable for corrosive and high-humidity locations.

Q: How often should the halyard and hardware be inspected?

A: Routine inspection is recommended at least annually, or more frequently in high-wind areas.

Q: How should I plan spacing if installing multiple flag poles?

A: Spacing is typically determined by site layout and visual requirements; allow sufficient distance to prevent flag interference and ensure clear visibility.

Application Questions and Clarification

Q: Is this pole suitable for stadium or school flag installations?

A: Yes, this pole is commonly used for stadium, school, and large facility flag displays.

Q: Can this pole be used for government or municipal building flag displays?

A: Yes, this model is appropriate for government, municipal, and corporate facility flag installations.

Q: Is the pole non-conductive for use near electrical infrastructure?

A: The fiberglass construction is non-conductive and suitable for locations near electrical equipment.

Q: Are additional certifications available for this product?

A: No, this product does not carry additional certifications beyond the structural warranty.