30 Foot Above Ground | 33 Foot Total Height Fiberglass Flag Pole | 6.75 Inch Base Diameter | Internal Halyard | In Ground | Rated for 125 MPH

Product Overview

This is a 30 foot above ground fiberglass flag pole with a total height of 33 feet, designed for in-ground installation. The pole features an internal halyard system, stationary truck, gold ball top, and a 16 inch flash collar. It is engineered for long-term flag display in environments where wind resistance and corrosion protection are required. Typical installations include commercial properties, municipal sites, and facility entrances where a durable, low-maintenance flag pole is needed.

The fiberglass construction provides a non-conductive, corrosion-resistant alternative to metal poles, making it suitable for coastal or high-humidity locations. The 125 mph wind rating (unflagged) supports reliable performance in exposed areas. Standard flag size is 5 x 8 feet, and the pole is supplied with all necessary fittings for secure flag mounting and operation.

Core Performance and Output

This pole is rated for 125 mph wind loads (unflagged) and supports a 5 x 8 foot flag as standard. The 6.75 inch base diameter and 77 lb weight provide structural stability for permanent installations. The fiberglass material resists corrosion, UV degradation, and electrical conductivity, supporting long-term use in harsh environments.

The 33 foot total height and 30 foot above-grade exposure are suitable for prominent flag display at commercial, municipal, and institutional sites. Excessive flag size or installation in locations with higher wind exposure may require additional engineering review. The 3 foot ground sleeve and 8 inch inside diameter ensure secure anchoring in soil or concrete foundations.

Adjustability and Control Options

The internal halyard system uses a #10 (5/16 inch) rope, routed inside the pole for tamper resistance and reduced noise. The nylon cleat and brass snaps with vinyl covers are included for secure flag attachment and easy raising or lowering. The stationary truck and gold ball top are standard, with no rotating or external halyard components.

No integrated lighting or electrical options are included. The pole is compatible with standard in-ground flag pole lighting fixtures if required. Adjustments are limited to flag size and halyard tension; the pole itself is fixed once installed.

Longevity and Reliability

The fiberglass construction provides long-term durability in corrosive, coastal, or high-humidity environments. The pole is non-conductive and will not rust, pit, or require painting. UV-resistant finish maintains appearance and structural integrity over time.

All included hardware is designed for outdoor exposure. The 15 year warranty covers material and manufacturing defects under normal use. Routine inspection of halyard, cleat, and flag attachment points is recommended for ongoing reliability.

Build Quality and Physical Characteristics

The pole is constructed from white fiberglass with a 6.75 inch base diameter and 3 inch tip outside diameter. Total weight is 77 lbs, supporting manageable handling during installation. The 3 foot ground sleeve and 16 inch flash collar are included for secure, finished in-ground mounting.

All fittings?internal halyard, stationary truck, gold ball top, brass snaps, nylon cleat, and flash collar?are supplied as standard. The pole is designed for permanent, upright installation and is not intended for portable or temporary use.

Where This Product Fits Best

This fiberglass flag pole is suited for environments requiring a corrosion-resistant, non-conductive flag display solution with a prominent above-ground height. Typical installations include commercial, municipal, and institutional properties where long-term durability and low maintenance are priorities.

• flag display
• commercial property flag mounting
• municipal flag installation
• facility flag display
• school flag installation
• government building flag display
• stadium flag display
• corporate facility flag display

The pole is suitable for both inland and coastal locations, including areas with high humidity or salt exposure. It is not intended for use as a light pole or for mounting non-flag equipment.

Installation and Long-Term Use

Installation requires excavation for the 3 foot ground sleeve and secure backfilling with concrete or approved material. The 8 inch inside diameter sleeve accommodates the pole base and provides lateral stability. All hardware is included for flag mounting and operation.

Routine maintenance is limited to halyard inspection, cleat tightening, and periodic cleaning of the pole surface. The fiberglass finish resists fading and corrosion, minimizing long-term upkeep. Replacement of halyard or flag hardware may be required over time depending on usage and environmental exposure.

How This Fixture Is Commonly Used

This flag pole is typically installed at mounting heights of 30 feet above grade, with spacing determined by site visibility and property layout. Common practice is to install a single pole at facility entrances, plazas, or open grounds, or to group multiple poles for multi-flag displays at stadiums or government buildings.

Flag size and halyard configuration are selected based on wind exposure and display requirements. Using larger flags or installing in high-wind areas may require closer inspection of wind ratings and hardware wear. Higher mounting heights increase visibility but may require additional planning for access and maintenance.

Safety, Certifications, and Warranty

The pole is non-conductive and corrosion-resistant, supporting safe installation near roadways, walkways, or electrical infrastructure. All hardware is designed for outdoor use and long-term exposure. The 125 mph wind rating applies to unflagged conditions; flag size and local wind conditions should be reviewed for compliance.

Warranty coverage is 15 years for material and manufacturing defects. No additional certifications are specified for this product. Follow all local codes and best practices for in-ground flag pole installation and maintenance.

Frequently Asked Questions

Q: What is the maximum flag size recommended for this pole?

A: The standard flag size is 5 x 8 feet. Larger flags may exceed wind load ratings and are not recommended without engineering review.

Q: What is included with the pole for installation?

A: The pole includes a 3 foot ground sleeve, 16 inch flash collar, internal halyard, stationary truck, gold ball top, brass snaps with vinyl covers, and nylon cleat.

Q: Can this pole be used in coastal or high-humidity environments?

A: Yes, the fiberglass construction is corrosion-resistant and suitable for coastal or high-humidity locations.

Q: What is the wind rating for this flag pole?

A: The pole is rated for 125 mph wind loads when unflagged. Wind rating decreases when a flag is flown.

Q: How should I plan spacing if installing multiple flag poles?

A: Spacing is typically determined by flag size and site layout. Allow sufficient distance to prevent flag entanglement and ensure clear visibility from intended viewing angles.

Application Questions and Clarification

Q: Is this pole suitable for mounting lighting fixtures or banners?

A: This pole is designed for flag display only. It is not intended for lighting fixture or banner mounting.

Q: Can the pole be installed in concrete or asphalt surfaces?

A: Yes, the ground sleeve can be set in concrete for secure installation. Installation in asphalt is not recommended without a concrete foundation.

Q: Does the pole require grounding?

A: The fiberglass pole is non-conductive and does not require electrical grounding.

Q: What maintenance is required for the internal halyard system?

A: Periodic inspection of the halyard, cleat, and flag attachment hardware is recommended. Replace worn components as needed to maintain safe operation.