30 Foot Fiberglass Flag Pole | 6.5 Inch Base Diameter | Internal Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 30-foot fiberglass flag pole features a round tapered shaft with a 6.5-inch outer diameter at ground level, tapering to 3 inches at the tip. The white fiberglass construction weighs 78 pounds total. An internal halyard system uses #10 (5/16-inch) rope with an internal cam cleat for flag height adjustment.

The pole ships with fittings for internal ropes, a stationary truck, a 6-inch gold ball top, and one set of brass snaps with white vinyl covers. A nylon cleat is also included. Anchor bolts and base cover are sold separately.

Where This Product Fits Best

This flag pole is built for permanent installation using an anchor base mount. The 125 mph wind rating applies to the pole in an unflagged condition. The standard flag size for this pole height and taper is 5 x 8 feet.

Fiberglass construction suits sites where corrosion resistance matters or where a non-conductive material is preferred. The white finish provides a consistent appearance without painting or refinishing over time.

Performance and Functional Considerations

The internal halyard keeps the rope and hardware enclosed within the pole shaft, reducing wear from weather exposure and limiting access to flag operation. The internal cam cleat secures the halyard at the desired flag height.

At 78 pounds, the fiberglass shaft is lighter than comparable steel or aluminum poles of this height, which affects handling during installation. The round tapered profile provides structural rigidity while keeping overall weight manageable.

Installation and Long-Term Use

The anchor base mount requires 24-inch anchor bolts with a 3/4-inch diameter and 2.75-inch projection. The bolt circle spans 9 to 11 inches, and the base plate measures 10.24 x 10.24 inches. Anchor bolts are not included and must be specified for the site conditions.

Fiberglass does not corrode and does not require repainting under normal conditions. The internal halyard system limits exposure of rope and hardware to UV and weather, which extends service intervals between replacements.

How This Fixture Is Commonly Used

Flag raising and lowering is handled through the internal halyard, accessed via the cam cleat at the base of the pole. This keeps the operation contained and limits tampering in public or commercial settings.

The 5 x 8-foot standard flag size is matched to the pole height and wind loading. Running a larger flag increases wind load and may exceed the rated capacity under high wind conditions. The 125 mph rating assumes no flag is attached.

Safety, Certifications, and Warranty

This flag pole carries a 15-year warranty. The wind rating of 125 mph applies to the unflagged pole only. Actual wind tolerance with a flag attached will be lower depending on flag size and material.

Fiberglass is non-conductive, which may be relevant for installations near electrical infrastructure or in areas with lightning exposure concerns.

Frequently Asked Questions

What is the wind rating?
The pole is rated for 125 mph winds in an unflagged condition.

What size flag does this pole support?
The standard flag size for this pole is 5 x 8 feet.

What anchor bolts are required?
The base requires 24-inch anchor bolts with a 3/4-inch diameter, 2.75-inch projection, and a bolt circle of 9 to 11 inches. Anchor bolts are sold separately.

What is the warranty?
This pole includes a 15-year warranty.

Is the base cover included?
No. The base cover is sold separately.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.