25 Foot Above Ground | 28 Foot Total Height Fiberglass Flag Pole | 6 Inch Base Diameter | Internal Halyard | In Ground | Rated for 180 MPH

Product Overview

This is a 25 foot above ground, 28 foot total height fiberglass flag pole with a 6 inch base diameter, designed for in-ground installation. The pole features an internal halyard system, stationary truck, gold ball top, and a 16 inch flash collar. It is engineered for flag display in commercial, municipal, and institutional environments where durability and wind resistance are required.

The fiberglass construction provides a non-conductive, corrosion-resistant solution suitable for exposed sites and coastal areas. With a 180 mph wind rating (unflagged), this pole is specified for locations subject to severe weather or high wind loads. Typical installations include facility entrances, government buildings, and corporate campuses.

Core Performance and Output

This fiberglass flag pole is rated for 180 mph wind loads without a flag, supporting reliable operation in hurricane-prone or high-wind regions. The 6 inch base diameter and 3 inch tip diameter provide structural stability for flags up to 5 x 8 feet. The pole weighs 75 lbs and is designed for in-ground mounting using the included 3 foot ground sleeve.

Material performance is consistent in both coastal and inland environments, with fiberglass offering high resistance to corrosion, UV exposure, and electrical conductivity. The pole?s structural capacity is suitable for standard flag sizes and typical flag display requirements. Excessive flag size or improper installation can reduce wind load performance.

Adjustability and Control Options

The internal halyard system uses a #10 (5/16 inch) rope, routed inside the pole for tamper resistance and reduced noise. The stationary truck and gold ball top are included as standard. The nylon cleat and brass snaps with vinyl covers are provided for secure flag attachment and operation.

There are no integrated lighting or automation controls. Adjustments are limited to flag raising and lowering via the internal halyard. The pole is compatible with standard flag lighting fixtures when installed per code and manufacturer guidelines.

Longevity and Reliability

The fiberglass construction is engineered for long-term outdoor exposure, with a 15 year warranty covering structural integrity. The non-corrosive material resists salt, moisture, and chemical exposure, making it suitable for coastal and industrial sites.

Routine inspection of the halyard, cleat, and flag attachment hardware is recommended to maintain reliable operation. The pole?s finish and color options are UV-stabilized to minimize fading over time. No periodic painting or galvanizing is required.

Build Quality and Physical Characteristics

This pole is manufactured from high-strength fiberglass with a white or custom color finish. The 6 inch base diameter and 3 inch tip diameter provide a tapered profile for both aesthetics and wind performance. The included 3 foot ground sleeve and 16 inch flash collar support secure in-ground installation and finished appearance.

All hardware is non-corrosive and designed for outdoor use. The stationary truck, gold ball top, and nylon cleat are standard. The pole supports a standard 5 x 8 foot flag and is compatible with most commercial flag lighting fixtures when properly mounted.

Where This Product Fits Best

This fiberglass flag pole is intended for permanent flag display in environments requiring high wind resistance, non-conductivity, and corrosion resistance. Typical sites include commercial properties, municipal buildings, schools, and stadiums.

• flag display
• commercial property flag mounting
• municipal flag installation
• facility flag display
• school flag installation
• government building flag display
• stadium flag display
• corporate facility flag display

Suitable for both inland and coastal locations, including areas with frequent storms or salt exposure. The pole?s non-conductive properties are preferred for sites near electrical infrastructure or where lightning risk is a concern.

Installation and Long-Term Use

Installation requires excavation for the 3 foot ground sleeve and proper backfill to ensure stability. The pole is set in-ground and secured with the included flash collar for a finished look. All hardware is included for flag attachment and operation.

Routine maintenance is limited to periodic inspection of the halyard, cleat, and flag hardware. The fiberglass surface can be cleaned with mild detergent and water. No painting or rust prevention is required. Replacement parts for halyard and hardware are standard and accessible.

How This Fixture Is Commonly Used

This flag pole is typically installed at mounting heights of 25 feet above grade, with spacing determined by site layout and visual requirements. Common deployments include single pole installations at facility entrances or grouped poles for multi-flag displays at government or corporate sites.

Spacing and orientation are determined by flag size, wind exposure, and site lines. Using larger flags or multiple flags on a single pole may require additional structural review. Higher wind ratings reduce the risk of pole failure but may require deeper or reinforced foundations in exposed locations.

Safety, Certifications, and Warranty

The pole is non-conductive and corrosion-resistant, supporting safe installation near roadways, electrical infrastructure, or in coastal environments. All hardware is designed for outdoor use and long-term exposure.

Wind rating is 180 mph (unflagged). Warranty is 15 years for structural integrity. No additional certifications are specified for this product.

Frequently Asked Questions

Q: What is the maximum flag size supported by this pole?

A: The standard flag size for this pole is 5 x 8 feet.

Q: What is the wind rating for this flag pole?

A: The pole is rated for 180 mph wind loads without a flag attached.

Q: Is the pole suitable for coastal or corrosive environments?

A: Yes, the fiberglass construction is corrosion-resistant and suitable for coastal or salt-exposed sites.

Q: What is included with the pole for installation?

A: The pole includes a 3 foot ground sleeve, 16 inch flash collar, internal halyard, stationary truck, gold ball top, nylon cleat, and flag attachment hardware.

Q: How deep should the ground sleeve be installed?

A: The included ground sleeve is 3 feet long and should be installed fully below grade for proper support.

Q: What maintenance is required for this flag pole?

A: Routine inspection of the halyard, cleat, and flag hardware is recommended. The fiberglass surface requires only occasional cleaning.

Q: How should I plan spacing for multiple flag poles?

A: Spacing depends on flag size, site layout, and visual requirements. Allow adequate distance to prevent flag entanglement and ensure clear visibility.

Application Questions and Clarification

Q: Can this pole be used for stadium flag display?

A: Yes, this pole is suitable for stadium flag display when installed according to wind rating and flag size guidelines.

Q: Is this pole appropriate for government building flag installations?

A: Yes, the pole is commonly specified for government building flag display due to its wind rating and non-conductive properties.

Q: Does the pole require painting or rust prevention?

A: No, the fiberglass construction does not require painting or rust prevention. The finish is UV-stabilized for outdoor use.

Q: Can this pole be installed near electrical lines?

A: Yes, the non-conductive fiberglass material is suitable for installation near electrical infrastructure.