25 Foot Fiberglass Flag Pole | 6 Inch Base Diameter | Internal Halyard | In Ground | Rated for 125 MPH

Product Overview

This is a 25-foot fiberglass flag pole with a 6-inch base diameter, designed for in-ground installation. The pole stands 25 feet above grade with a total height of 28 feet, accounting for the buried portion. It features an internal halyard system using #10 (5/16 inch) rope and carries a 125 mph wind rating in unflagged condition.

The pole has a round tapered shape, starting at 6 inches outside diameter at ground level and tapering to 3 inches at the tip. Total weight is 59 pounds. The white finish is standard. This pole ships with fittings for internal ropes, a stationary truck, gold ball top (6-inch diameter), one set of brass snaps with white vinyl covers, and a 16-inch flash collar.

Where This Product Fits Best

This pole is sized for a standard 4 x 6 foot flag. The 25-foot above-grade height provides appropriate visibility for commercial properties, municipal buildings, schools, and similar installations where a mid-height pole is needed without the structural demands of taller systems.

Fiberglass construction makes this pole suitable for coastal or corrosive environments where steel poles would require more frequent maintenance. The internal halyard keeps the rope enclosed within the pole shaft, which is typical for locations where external halyards could be tampered with or where a cleaner appearance is required.

Performance and Functional Considerations

The 125 mph wind rating applies to the pole in unflagged condition. When a flag is flown, wind load increases significantly, and actual wind tolerance will be lower depending on flag size and wind exposure. The standard flag size for this pole is 4 x 6 feet.

The internal halyard design routes the rope inside the pole shaft. Access is through the stationary truck at the top. This configuration reduces external hardware and prevents halyard slapping against the pole in windy conditions.

Installation and Long-Term Use

This pole requires in-ground installation using the included ground sleeve. The ground sleeve has an 8-inch inside diameter and a 3-foot length, which determines the foundation depth and concrete pour requirements. The 16-inch flash collar covers the transition between the pole base and the surrounding grade.

Fiberglass does not rust or corrode, which reduces long-term maintenance compared to steel or aluminum poles in environments with salt air, chemical exposure, or high humidity. The white finish is integral to the material and does not require repainting under normal conditions.

How This Fixture Is Commonly Used

Once installed, the internal halyard is accessed through the base of the pole to raise and lower the flag. The brass snaps with white vinyl covers attach to the halyard and clip to the flag grommets. The stationary truck at the top holds the pulley mechanism in a fixed position.

The 59-pound weight allows for manageable handling during installation with standard equipment. The tapered profile and 3-inch tip diameter keep the upper section light relative to the base, which affects how the pole flexes under wind load.

Safety, Certifications, and Warranty

This flag pole carries a 15-year warranty.

The 125 mph wind rating is specified for unflagged conditions. Flying a flag in high winds increases load on the pole and hardware. Flag size should be matched to wind conditions at the installation site.

Frequently Asked Questions

What flag size does this pole support?
The standard flag size for this pole is 4 x 6 feet.

What is the wind rating?
The pole is rated for 125 mph winds in unflagged condition.

What is included with the pole?
The pole includes fittings for internal ropes, a stationary truck, a 6-inch gold ball top, one set of brass snaps with white vinyl covers, and a 16-inch flash collar.

What are the ground sleeve dimensions?
The ground sleeve has an 8-inch inside diameter and a 3-foot length.

What is the warranty coverage?
This pole is covered by a 15-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.