25 Foot Fiberglass Flag Pole | 6.5 Inch Diameter | Internal Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 25 foot fiberglass flag pole is designed for permanent flag display at commercial, municipal, and institutional sites. The pole features a 6.5 inch base diameter and a 3 inch tip diameter, providing a balance of structural strength and visual proportion for mid-height flag installations. Internal halyard with cam cleat and a gold ball finial are included for secure, tamper-resistant flag operation. Anchor base mounting supports installation on concrete foundations in open or landscaped areas.

Rated for 125 mph wind (unflagged), this pole is suitable for exposed locations where wind loading is a concern. Typical installations include facility entrances, government buildings, schools, and corporate campuses where a 25 foot pole height is appropriate for site scale and visibility.

Core Performance and Output

This fiberglass flag pole is engineered for structural performance in wind speeds up to 125 mph (unflagged). The 6.5 inch base diameter and 61 lb weight provide stability for standard 4 x 6 foot flags. The anchor base design allows for secure attachment to concrete footings using 3/4 inch diameter anchor bolts (sold separately).

Fiberglass construction offers non-conductivity and corrosion resistance, making it suitable for coastal or high-humidity environments. The pole?s EPA (Effective Projected Area) and weight capacity are matched to typical flag sizes and do not support oversized flags or multiple flag configurations. Excessive flag size or high wind exposure may reduce service life or require more frequent inspection.

Adjustability and Control Options

The internal halyard system uses a #10 (5/16 inch) rope and internal cam cleat for secure flag raising and lowering. The cam cleat is accessible through a lockable access door, reducing tampering and unauthorized access. The included 6 inch gold ball finial provides a finished appearance and is compatible with standard truck assemblies.

Flag position is adjustable along the halyard, but the pole is not designed for banner arms or external attachments. No integrated lighting or electrical options are included; external flag lighting must be specified separately if required.

Longevity and Reliability

The fiberglass material resists corrosion, UV degradation, and weathering, supporting long-term outdoor use with minimal maintenance. The pole is covered by a 15 year warranty against structural failure under rated conditions. Internal halyard components are protected from the elements, reducing wear compared to external systems.

Routine inspection of the halyard, cleat, and anchor hardware is recommended, especially in high wind or coastal environments. Anchor bolts and base cover are not included and must be selected to match site conditions and installation requirements.

Build Quality and Physical Characteristics

This pole is constructed from white fiberglass with optional custom color finishes. The base dimensions are 10.24 x 10.24 inches, with a bolt circle of 9?11 inches and a required bolt projection of 2.75 inches. The standard pole weight is 61 lbs, supporting manageable handling during installation with proper equipment.

The pole is designed for anchor base installation only. The internal cam cleat and halyard system are pre-configured for standard flag operation. The 6 inch gold ball finial is included; anchor bolts and base cover are sold separately.

Where This Product Fits Best

This 25 foot fiberglass flag pole is suited for permanent flag display in commercial, municipal, and institutional environments where moderate height and wind resistance are required. The anchor base design supports installation in landscaped, paved, or open areas with concrete foundations.

• flag display
• commercial property flag mounting
• municipal flag installation
• facility flag display
• school flag installation
• government building flag display
• stadium flag display
• corporate facility flag display

Fiberglass construction is suitable for coastal, humid, or corrosive environments where metal poles may require additional maintenance. The 25 foot height is appropriate for most mid-scale sites and avoids excessive wind loading found with taller poles.

Installation and Long-Term Use

Installation requires a concrete foundation with a bolt circle of 9?11 inches and 3/4 inch diameter anchor bolts (24 inch length recommended). The pole is set over the anchor bolts and secured with the included base plate. Handling and lifting should be performed with care to avoid surface damage.

Long-term use is supported by the non-corrosive fiberglass construction and internal halyard system. Periodic inspection of the halyard, cleat, and anchor hardware is recommended, especially after severe weather events. The pole is not designed for climbing or for use with oversized flags.

How This Fixture Is Commonly Used

Typical mounting height is 25 feet above grade, with the pole installed on a poured concrete base using anchor bolts. Spacing from buildings or other poles is determined by flag size and site visibility requirements. Most installations use a single 4 x 6 foot flag; multiple flags or oversized banners are not supported by this model.

Flag pole count and placement are based on site layout and desired visual impact. Using higher poles may increase wind loading and require larger foundations. The internal halyard reduces maintenance and tampering compared to external systems, but periodic inspection is still required.

Safety, Certifications, and Warranty

This fiberglass flag pole is rated for 125 mph wind (unflagged) and includes a 15 year structural warranty. Fiberglass construction is non-conductive and corrosion resistant. The internal halyard system reduces risk of tampering and unauthorized access.

All installation and maintenance should follow standard safety practices for working at height and handling large structural components. Anchor bolts and base cover must be specified to match site conditions and are not included with the pole.

Frequently Asked Questions

Q: What is the maximum flag size supported by this pole?

A: The standard flag size for this pole is 4 x 6 feet. Larger flags are not recommended due to wind loading and structural limits.

Q: What wind speed is this pole rated for?

A: This pole is rated for 125 mph wind when unflagged. Flying a flag in high winds may reduce the effective wind rating.

Q: Are anchor bolts and base cover included?

A: No, anchor bolts and base cover are sold separately and must be selected to match the installation site.

Q: Can this pole be installed in coastal or corrosive environments?

A: Yes, fiberglass construction is suitable for coastal, humid, or corrosive environments.

Q: What is the recommended foundation for installation?

A: A poured concrete foundation with a 9?11 inch bolt circle and 3/4 inch diameter anchor bolts is recommended.

Q: How often should the halyard and cleat be inspected?

A: Inspection is recommended at least annually, and after severe weather events or heavy flag use.

Q: Can this pole support multiple flags or banners?

A: This model is designed for a single standard flag. Multiple flags or banners are not supported.

Q: How do I determine the number of flag poles needed for a site?

A: Pole count and placement depend on site layout, visibility requirements, and desired visual impact. Typical installations use one pole per flag display location.

Application Questions and Clarification

Q: Is this pole suitable for stadium flag display?

A: Yes, this pole is commonly used for stadium flag display where a 25 foot height is appropriate.

Q: Can this pole be used for government building flag display?

A: Yes, this pole is suitable for government building flag display and similar institutional applications.

Q: Is this pole appropriate for school flag installation?

A: Yes, this pole is frequently specified for school flag installations at entrances or athletic fields.

Q: Can this pole be used for corporate facility flag display?

A: Yes, this pole is suitable for corporate facility flag display at building entrances or campus locations.