25 Foot Fiberglass Flag Pole | 6 Inch Base Diameter | External Halyard | In Ground | Rated for 125 MPH

Product Overview

This 25 foot fiberglass flag pole is designed for permanent in-ground installation at commercial, municipal, and institutional sites. The pole features a 6 inch base diameter, round tapered profile, and a white finish. It is supplied with an external halyard system, gold ball finial, cleat, and a 3 foot ground sleeve for direct burial. Typical installations include facility entrances, government buildings, and school campuses where a 25 foot above-grade flag display is required.

The fiberglass construction provides non-conductivity and corrosion resistance, making it suitable for both inland and coastal environments. The pole is rated for 125 mph wind loads (unflagged) and supports standard 4 x 6 foot flags. All hardware and fittings are included for a complete installation.

Core Performance and Output

This pole is engineered for structural stability with a 6 inch base diameter and 3 inch tip diameter. The 125 mph wind rating (unflagged) covers most municipal and commercial flag display requirements. The fiberglass material resists corrosion and does not conduct electricity, reducing maintenance in harsh or coastal environments.

The round tapered design provides strength while minimizing weight at 59 lbs. The included 3 foot ground sleeve and 16 inch flash collar ensure secure in-ground mounting. Excessive flag size or installation in areas with higher wind exposure may require additional engineering review.

Adjustability and Control Options

This model uses an external halyard system with #10 (5/16 inch) rope for flag raising and lowering. The nylon cleat allows secure tie-off at a comfortable height. The gold ball finial and fittings are included for standard flag operation.

No internal halyard or locking mechanism is provided. The pole is not designed for tilt-down or removable applications. Flag size is limited to 4 x 6 feet for optimal wind performance and hardware compatibility.

Longevity and Reliability

The fiberglass construction provides long-term durability in both inland and coastal environments. The material is resistant to corrosion, UV degradation, and does not require painting. The pole is supplied with a 15-year warranty covering structural integrity under normal use.

Routine inspection of halyard, cleat, and flag attachment hardware is recommended. The non-conductive surface reduces risk in lightning-prone areas compared to metal poles.

Build Quality and Physical Characteristics

This pole measures 28 feet total length with 25 feet above grade after installation. The base diameter is 6 inches, tapering to 3 inches at the tip. The pole weighs 59 lbs and is finished in white gelcoat for uniform appearance and weather resistance.

All hardware is included: 3 foot ground sleeve (8 inch inside diameter), 6 inch gold ball, 16 inch flash collar, 8.5 inch nylon cleat, and external halyard fittings. The round tapered profile provides both strength and a traditional flag pole appearance.

Where This Product Fits Best

This fiberglass flag pole is suited for permanent flag display at commercial, municipal, and institutional properties. It is commonly installed at facility entrances, government buildings, and school campuses where a 25 foot above-grade pole is appropriate.

• flag display
• municipal flag installation
• commercial property flag mounting
• facility flag display
• school flag installation
• government building flag display
• stadium flag display
• corporate facility flag display

The fiberglass construction is suitable for both inland and coastal locations. The 125 mph wind rating covers most standard flag display environments. Not intended for locations with extreme wind exposure or for oversized flags.

Installation and Long-Term Use

Installation requires excavation for the 3 foot ground sleeve and proper backfill for stability. The pole is set directly into the sleeve and secured with the included flash collar. All hardware is provided for external halyard operation and flag attachment.

Routine maintenance includes inspection of halyard, cleat, and flag hardware. The fiberglass surface requires minimal cleaning and does not corrode. Replacement of halyard rope and cleat may be needed over time depending on usage and exposure.

How This Fixture Is Commonly Used

Typical mounting height is 25 feet above grade, with the pole set 3 feet below ground in the supplied sleeve. Standard layout is single pole installation at facility entrances, plazas, or building frontages. Multiple poles may be installed in a row for multi-flag displays at larger sites.

Spacing between poles is determined by flag size and site requirements. Using the standard 4 x 6 foot flag maintains wind rating and hardware compatibility. Increasing flag size or installing in high wind areas may require reduced pole spacing or additional engineering review.

Safety, Certifications, and Warranty

This pole is non-conductive and corrosion resistant due to its fiberglass construction. The 125 mph wind rating (unflagged) is based on structural testing. All hardware is included for safe flag operation and secure installation.

The product includes a 15-year warranty covering structural integrity. No additional certifications are specified for this model.

Frequently Asked Questions

Q: What is the maximum flag size for this pole?

A: The standard flag size is 4 x 6 feet. Larger flags are not recommended due to wind load limits.

Q: Is this pole suitable for coastal or corrosive environments?

A: Yes, the fiberglass construction is resistant to corrosion and suitable for coastal installations.

Q: What is included with the pole for installation?

A: The pole includes a 3 foot ground sleeve, gold ball finial, external halyard hardware, nylon cleat, and flash collar.

Q: Can this pole be installed with an internal halyard system?

A: No, this model is supplied with an external halyard only. Internal halyard options are not available for this pole.

Q: How should I plan spacing if installing multiple flag poles?

A: Allow at least 10?15 feet between poles to accommodate flag movement and avoid tangling. Adjust spacing based on flag size and site layout.

Application Questions and Clarification

Q: Is this pole appropriate for stadium flag display?

A: Yes, this pole is commonly used for stadium flag displays within its wind rating and flag size limits.

Q: Can this pole be used for government building flag installations?

A: Yes, this model is suitable for government building flag displays and meets typical municipal requirements.

Q: Is the pole suitable for school campus flag installations?

A: Yes, this pole is frequently installed at schools for permanent flag display.

Q: Can this pole be used for corporate facility flag displays?

A: Yes, this pole is appropriate for corporate facility flag installations where a 25 foot above-grade pole is required.