25 Foot Fiberglass Flag Pole | 6.5 Inch Diameter | External Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 25 Foot Fiberglass Flag Pole is designed for permanent outdoor flag display at commercial, municipal, and institutional sites. The pole features a 6.5 inch ground-level diameter, external halyard system, and anchor base mounting. Typical installations include facility entrances, government buildings, and corporate campuses where a durable, corrosion-resistant flag pole is required. The 25 ft height is suitable for standard 4 x 6 ft flags and provides clear visibility without excessive wind load.

The fiberglass construction offers a lightweight yet strong alternative to metal poles, with a total weight of 61 lbs. The anchor base design allows for secure installation on concrete foundations using a 9-11 inch bolt circle. Anchor bolts and base cover are not included and must be sourced separately.

Core Performance and Output

This pole is rated for wind speeds up to 125 mph (unflagged), supporting reliable flag display in most commercial and municipal environments. The 6.5 inch base diameter and 3 inch tip diameter provide structural stability for the specified height and standard flag size. The external halyard system uses a #10 (5/16 inch) rope and includes an 8.5 inch nylon cleat for secure flag attachment.

The fiberglass material resists corrosion and does not conduct electricity, making it suitable for coastal or high-humidity locations. Excessive flag size or installation in areas with frequent extreme winds may require additional engineering review. The pole is not designed for high-mast lighting or non-flag structural loads.

Adjustability and Control Options

This flag pole uses an external halyard system for manual flag raising and lowering. The halyard runs along the outside of the pole and is secured with the included nylon cleat. The ball ornament at the top is 6 inches in diameter and provides a finished appearance.

No integrated lighting, electrical, or automated control options are included. The pole is compatible with standard flag pole lighting fixtures mounted at the base or on adjacent structures, but does not include provisions for internal wiring or powered accessories.

Longevity and Reliability

The fiberglass construction provides long-term resistance to corrosion, UV exposure, and weathering. The pole is designed for continuous outdoor use and is backed by a 15-year warranty. Routine inspection of the halyard, cleat, and anchor hardware is recommended to maintain reliable operation.

Fiberglass does not require painting or galvanizing and will not rust. The pole?s structural integrity is maintained under normal wind loading and flag sizes as specified. Overloading with oversized flags or improper installation can reduce service life.

Build Quality and Physical Characteristics

This pole measures 25 feet in total height with a 6.5 inch outside diameter at ground level and a 3 inch tip diameter. The anchor base is 10.24 x 10.24 inches and requires a 9-11 inch bolt circle with 3/4 inch diameter anchor bolts (sold separately). The standard color is white, with custom color options available.

The pole weighs 61 lbs, allowing for manageable handling during installation. The fiberglass material is non-conductive and suitable for environments where electrical isolation is required. The included components are the external halyard, nylon cleat, and ball ornament. Anchor bolts and base cover are not included.

Where This Product Fits Best

This flag pole is intended for permanent outdoor flag display at commercial, municipal, and institutional sites. It is suitable for locations requiring a corrosion-resistant, non-conductive pole with a 25 ft mounting height. Typical environments include facility entrances, government buildings, and school campuses.

• flag display
• commercial property flag mounting
• municipal flag installation
• facility flag display
• school flag installation
• government building flag display
• corporate facility flag display

The fiberglass construction is well-suited for coastal, humid, or corrosive environments. The 125 mph wind rating supports use in most regions, but sites with frequent severe storms may require additional review. The pole is not intended for use as a lighting mast or for mounting non-flag loads.

Installation and Long-Term Use

Installation requires an anchor base foundation with a 9-11 inch bolt circle and 3/4 inch diameter anchor bolts. The pole is set over the anchor bolts and secured at the base. Handling is manageable for a two-person crew due to the 61 lb weight, but care should be taken to avoid damaging the fiberglass surface during installation.

Routine maintenance includes inspecting the halyard, cleat, and anchor hardware for wear or corrosion. The fiberglass surface should be cleaned periodically to maintain appearance. The pole does not require painting or rust prevention. Anchor bolts and base cover must be sourced separately and installed according to site requirements.

How This Fixture Is Commonly Used

This flag pole is typically installed at 25 ft mounting height for standard 4 x 6 ft flag display. Spacing between poles is determined by site layout and visual requirements, with single or grouped installations at entrances, plazas, or along building frontages. The external halyard allows for manual flag changes as needed.

Grouping multiple poles can create a formal display, but wind loading and foundation requirements must be considered for each installation. Using larger flags or installing in high-wind areas may require reduced flag size or additional engineering review.

Safety, Certifications, and Warranty

This product does not carry electrical or lighting certifications. The fiberglass construction is non-conductive and corrosion-resistant. The pole is rated for 125 mph wind speed (unflagged) and is covered by a 15-year warranty. Anchor bolts and base cover are not included and must be specified to meet site safety requirements.

Routine inspection and maintenance of the halyard, cleat, and anchor hardware are recommended to ensure safe operation. The pole is not intended for use as a structural support for lighting or other equipment.

Frequently Asked Questions

Q: What is the maximum flag size recommended for this pole?

A: The standard flag size for this pole is 4 x 6 feet. Larger flags may exceed wind load ratings and are not recommended without engineering review.

Q: What type of foundation is required for installation?

A: A concrete foundation with a 9-11 inch bolt circle and 3/4 inch diameter anchor bolts is required. Anchor bolts and base cover are sold separately.

Q: Can this pole be used in coastal or corrosive environments?

A: Yes, the fiberglass construction is resistant to corrosion and suitable for coastal or high-humidity locations.

Q: Is the halyard system internal or external?

A: This pole uses an external halyard system with a #10 (5/16 inch) rope and nylon cleat.

Q: How many people are needed for installation?

A: The 61 lb weight allows for handling by a two-person crew, but site conditions may require additional support.

Q: What is the wind rating for this pole?

A: The pole is rated for 125 mph wind speed without a flag attached.

Q: Can lighting fixtures be mounted to this pole?

A: This pole is not designed for lighting fixture mounting. Use only for flag display as specified.

Q: How should spacing be determined for multiple flag poles?

A: Spacing depends on site layout and visual requirements. Typical installations use single or grouped poles at entrances or along building frontages.

Application Questions and Clarification

Q: Is this pole suitable for stadium flag display?

A: Yes, this pole can be used for stadium flag display when a 25 ft height and standard flag size are appropriate for the site.

Q: Can this pole be installed at schools or government buildings?

A: Yes, this pole is commonly installed at schools, government buildings, and corporate facilities for permanent flag display.

Q: Is this pole appropriate for municipal flag installations?

A: Yes, the pole is suitable for municipal flag installations where a corrosion-resistant, non-conductive pole is required.

Q: What maintenance is required for long-term use?

A: Routine inspection of the halyard, cleat, and anchor hardware is recommended. The fiberglass surface should be cleaned as needed. No painting or rust prevention is required.