20 Foot Fiberglass Flag Pole | 5.75 Inch Base Diameter | Internal Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 20 Foot Fiberglass Flag Pole is designed for permanent flag display at commercial, municipal, and institutional sites. The pole features a 5.75 inch base diameter, internal halyard with cam cleat, and anchor base mounting for secure installation. Typical installations include facility entrances, government buildings, and corporate campuses where a 20 ft height is appropriate for visibility and proportion.

The fiberglass construction provides a non-conductive, corrosion-resistant solution suitable for outdoor environments. The pole is rated for 125 mph wind loads (unflagged) and supports a standard 4 x 6 ft flag. Anchor bolts and base cover are not included and must be sourced separately.

Core Performance and Output

This pole is engineered for structural stability in wind conditions up to 125 mph (unflagged). The 5.75 inch base diameter and 41 lb weight provide a balance of rigidity and manageable handling during installation. The internal halyard system reduces tampering and improves aesthetics compared to external rope systems.

The fiberglass material resists corrosion and is non-conductive, making it suitable for coastal or high-humidity environments. The anchor base design ensures secure mounting on concrete foundations. Excessive flag size or installation in locations with higher wind exposure may require additional engineering review.

Adjustability and Control Options

The internal halyard system uses a #10 (5/16 inch) rope and cam cleat for flag raising and lowering. The cam cleat is accessed through a lockable door, providing controlled access and reducing unauthorized use. The pole accommodates a standard 4 x 6 ft flag and includes a 6 inch gold ball finial for top mounting.

No electrical or remote control options are present. All adjustments are manual and performed at the base of the pole. The internal system minimizes noise and wear compared to external halyard designs.

Longevity and Reliability

The fiberglass construction is designed for long-term outdoor exposure, with resistance to UV degradation, corrosion, and moisture. The pole is supplied with a 15-year warranty covering structural integrity under normal use conditions.

Routine inspection of the halyard, cleat, and anchor hardware is recommended to maintain reliable operation. The non-metallic material reduces the risk of lightning conduction and surface rust, supporting extended service life in demanding environments.

Build Quality and Physical Characteristics

This pole measures 20 feet in total height, with a 5.75 inch outside diameter at ground level and a 3 inch tip diameter. The white finish is standard for architectural consistency. The anchor base measures 9 x 9 inches, with a bolt circle of 8 to 9 inches and 3/4 inch diameter anchor bolts (sold separately).

The pole weighs 41 lbs, allowing for manageable handling during installation with appropriate equipment. The internal cam cleat and lockable access door are designed for durability and tamper resistance. The fiberglass material provides a smooth, maintenance-friendly surface.

Where This Product Fits Best

This flag pole is suited for permanent flag display in commercial, municipal, and institutional environments where a 20 ft height is appropriate. It is commonly installed at facility entrances, government buildings, and corporate campuses. The corrosion-resistant fiberglass construction supports use in coastal and high-humidity locations.

• flag display
• commercial property flag mounting
• municipal flag installation
• facility flag display
• school flag installation
• government building flag display
• stadium flag display
• corporate facility flag display

The pole is designed for outdoor use, withstanding wind loads up to 125 mph (unflagged). It is not intended for temporary or portable applications. Anchor base installation requires a concrete foundation and proper bolt pattern alignment.

Installation and Long-Term Use

Installation requires a prepared concrete foundation with anchor bolts set to the specified bolt circle and projection. The pole is lowered onto the anchor base and secured with nuts and washers. The internal halyard and cam cleat are accessible through a lockable door for flag changes and maintenance.

Routine maintenance includes inspection of the halyard, cleat, and anchor hardware. The fiberglass surface can be cleaned with mild detergent and water. The pole does not require painting or rust prevention. Replacement of the halyard or cleat may be needed over time, depending on usage and exposure.

How This Fixture Is Commonly Used

Typical mounting height is 20 feet above grade, with the pole installed vertically on a concrete base using the anchor bolt pattern. Spacing between flag poles is determined by site layout and visual requirements, with 20 ft poles often used in single or grouped installations at entrances or along driveways.

Internal halyard access allows for secure flag changes without external ropes. Using the standard 4 x 6 ft flag maintains wind load compliance. Increasing flag size or installing in high-wind areas may require reduced flag dimensions or additional engineering review.

Safety, Certifications, and Warranty

This pole is non-conductive and corrosion-resistant due to its fiberglass construction. The internal halyard system reduces tampering and improves safety for flag changes. The product is covered by a 15-year warranty for structural integrity.

All installation and maintenance should follow standard safety practices for working at height and handling large components. Anchor bolts and base cover are not included and must be specified to match the pole?s base dimensions and wind rating.

Frequently Asked Questions

Q: What is the maximum wind speed this flag pole can withstand?

A: The pole is rated for 125 mph wind loads when unflagged.

Q: What size flag is recommended for this pole?

A: The standard flag size for this pole is 4 x 6 feet.

Q: What type of foundation is required for installation?

A: A concrete foundation with anchor bolts matching the specified bolt circle and projection is required.

Q: Is the halyard system internal or external?

A: This pole uses an internal halyard system with a cam cleat and lockable access door.

Q: How often should the halyard and cleat be inspected or replaced?

A: Inspection is recommended as part of routine maintenance; replacement depends on usage and exposure but is typically required after extended service.

Q: Can this pole be used in coastal or corrosive environments?

A: Yes, the fiberglass construction is suitable for coastal and corrosive environments.

Q: How should spacing between multiple flag poles be determined?

A: Spacing is based on site layout and visual requirements; 20 ft poles are often spaced to provide clear flag visibility without crowding.

Application Questions and Clarification

Q: Is this pole suitable for school or stadium flag installations?

A: Yes, this pole is commonly used for school, stadium, and other institutional flag displays.

Q: Can this pole be installed at government or corporate facilities?

A: Yes, it is designed for municipal, government, and corporate facility flag installations.

Q: What are the main limitations for this flag pole in terms of application?

A: The main limitations are flag size, wind rating, and the requirement for a permanent concrete foundation with anchor bolts.