16 Foot HVLS Ceiling Fan | 6 Blades | 12,750 Square Foot Coverage | 70000 CFM

Product Overview

This is a 20 foot diameter, 6-blade HVLS ceiling fan designed for large, open commercial and industrial spaces. The fan delivers up to 137,000 CFM and covers up to 19,750 square feet.

The fan operates at a maximum speed of 49 RPM and produces less than 59 dBA at full speed. The aluminum blades are finished in black and driven by a 1.5 HP gear drive motor.

Variable speed control is managed through a wall-mounted NEMA 1 VFD controller. The controller includes a safety disconnect, on/off toggle, and speed regulator.

Safety features include a safety cable, hub clips, hub retainer, dual-method fastening at all joints, and an integrated sprinkler shut-off.

Where This Product Fits Best

This fan is suited for large, open areas where high air movement is needed for occupant comfort or process support. Typical environments include warehouses, manufacturing plants, distribution centers, aircraft hangars, and gymnasiums.

Minimum mounting height is 12 feet, with at least 6 feet of ceiling clearance and 2 feet of horizontal clearance required. The fan is compatible with I-beam, Z-purlin, and open joist mounting structures.

It is designed for spaces with 208-240V single or three phase, or 460-480V three phase power. The fan weight is 197 lbs, so structural support must be verified before installation.

Performance and Functional Considerations

The fan provides up to 137,000 CFM, supporting air movement across up to 19,750 square feet. The 6-blade design and low maximum RPM (49) allow for high volume, low noise operation.

Variable speed control allows adjustment to match seasonal or process needs. The wall-mounted VFD controller provides direct access for speed changes and includes a safety disconnect.

Sound output is less than 59 dBA, supporting use in occupied spaces where noise is a concern. The aluminum blades are corrosion resistant and suitable for most indoor industrial environments.

Minimum mounting and clearance requirements must be met for safe and effective operation. The fan is not intended for low ceiling or confined installations.

Installation and Long-Term Use

The fan can be mounted to I-beams, Z-purlins, or open joists. Downrod extensions are available in 1, 2, 3, and 6 foot lengths to accommodate different ceiling heights and obstructions.

Minimum mounting height is 12 feet, with at least 6 feet of clearance above the fan and 2 feet of horizontal clearance from obstructions. The fan weighs 197 lbs and requires secure structural attachment.

The wall-mounted VFD controller should be installed in a location with clear access for operation and maintenance. All joined components use dual-method fastening for added security.

Safety features include a safety cable, hub clips, hub retainer, and integrated sprinkler shut-off. These features support safe operation and compliance with typical facility safety protocols.

How This Fixture Is Commonly Used

Once installed, the fan is typically set to a speed that matches the comfort or process requirements of the space. The wall-mounted controller allows you to adjust speed as needed for seasonal changes or occupancy levels.

Operators use the on/off toggle and speed regulator on the controller for day-to-day adjustments. The safety disconnect is used during maintenance or when isolating the fan from power is required.

The fan?s low noise output supports use in areas where communication or low ambient noise is important. The aluminum blades require minimal maintenance and are suitable for most indoor industrial environments.

Safety features such as the integrated sprinkler shut-off and safety cable are in place to support ongoing compliance and operational safety. Routine inspection of mounting hardware and safety components is recommended.

Safety, Certifications, and Warranty

This fan includes a safety cable, hub clips, hub retainer, and dual-method fastening at all joints. An integrated sprinkler shut-off is provided.

The controller is NEMA 1 rated for indoor use. Warranty coverage is provided by LED Lighting Supply.

All safety features are designed for industrial and commercial environments where overhead equipment must meet facility safety protocols.

Frequently Asked Questions

What voltages is this fan compatible with?
This fan operates on 208-240V single or three phase, and 460-480V three phase power.

What is the coverage area?
The fan is rated for up to 19,750 square feet of coverage.

What mounting options are available?
Mounting is supported on I-beams, Z-purlins, and open joists. Downrod extensions are available in 1, 2, 3, and 6 foot lengths.

What is the warranty?
Warranty coverage is provided by LED Lighting Supply.

Is this fan DLC or ETL listed?
No DLC or ETL listings are specified for this fan.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.