10 Foot HVLS Ceiling Fan | 6 Blades | 6,375 Square Foot Coverage | 15,000 CFM

Product Overview

This 68 inch commercial ceiling fan features 8 aluminum blades and a matte black finish. It is designed for use in commercial, industrial, and large residential spaces where high airflow is needed.

The fan operates on 120V and offers four selectable speeds, with a maximum airflow of 7,024 CFM at high speed and 2,730 CFM at low speed. The included controller allows for direct adjustment of speed settings.

The fan weighs 30.5 lbs and uses a 188 x 25 mm motor. The blades are pitched at 15 degrees for efficient air movement. The reversible function supports both summer and winter operation modes.

This fan is ETLus listed for wet locations. A 4 inch downrod is included, and a 2 ft downrod is available separately.

Where This Product Fits Best

This ceiling fan is suitable for warehouses, manufacturing areas, distribution centers, gymnasiums, and other large open spaces that require consistent air movement.

It can also be used in larger residential settings such as great rooms, covered patios, or garages where commercial-grade airflow and durability are needed.

The wet location rating allows installation in environments exposed to moisture, such as covered outdoor areas or spaces with high humidity.

Its matte black finish and aluminum construction make it appropriate for both functional and architectural applications where appearance and performance are both considerations.

Performance and Functional Considerations

The fan delivers up to 7,024 CFM at high speed, supporting effective air circulation in large spaces. The four speed settings allow for adjustment based on seasonal or occupancy needs.

The reversible feature enables year-round use, supporting both downward airflow for cooling and upward airflow for destratification during colder months.

The 8-blade design and 15 degree blade pitch are engineered for efficient, quiet operation at all speeds. The 188 x 25 mm motor is sized for commercial duty cycles.

The ETLus wet location listing confirms suitability for areas where the fan may be exposed to moisture or humidity.

Installation and Long-Term Use

The fan is designed for standard 120V electrical systems. A 4 inch downrod is included for typical ceiling mounting; a 2 ft downrod is available for higher ceilings or specific clearance requirements.

The 30.5 lb weight should be considered when planning mounting points and verifying structural support. Aluminum blades reduce overall weight while maintaining rigidity and corrosion resistance.

The included controller provides direct speed adjustment. The reversible function is accessible for seasonal changes in airflow direction.

Routine maintenance is limited to periodic cleaning and inspection of mounting hardware. The wet location rating supports use in environments where occasional exposure to water or humidity is expected.

How This Fixture Is Commonly Used

Once installed, you can adjust the fan speed using the provided controller to match the airflow needs of your space. The four speed settings allow you to increase or decrease air movement as occupancy or temperature changes.

The reversible function is used to change airflow direction for summer or winter operation. In summer, set the fan to push air downward for cooling. In winter, reverse the direction to circulate warm air from the ceiling.

The wet location rating means you do not need to restrict use to dry, conditioned spaces. The fan can be operated in covered outdoor areas or spaces with high humidity without concern for moisture exposure.

Aluminum blades and a matte black finish provide durability and a clean appearance, requiring only occasional cleaning to maintain performance and aesthetics.

Safety, Certifications, and Warranty

This fan is ETLus listed for wet locations. It is suitable for installation in environments where moisture exposure is possible.

The fan is covered by a warranty as stated in the product specifications.

All components are designed for commercial and industrial use, with materials and construction supporting long-term operation in demanding environments.

Installation must follow all applicable electrical and safety codes for ceiling-mounted fans in commercial or industrial settings.

Frequently Asked Questions

What voltage does this fan require?
This fan operates on 120V.

What is the airflow output range?
The fan delivers 7,024 CFM at high speed and 2,730 CFM at low speed.

Is this fan suitable for wet locations?
Yes, this fan is ETLus listed for wet locations.

What mounting options are available?
A 4 inch downrod is included. A 2 ft downrod is available separately.

What warranty coverage is provided?
This fan is covered by the warranty stated in the product specifications.

Does this fan qualify for DLC or other rebate programs?
No DLC qualification is listed for this fan.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.