72 Inch Commercial Ceiling Fan | 8 Blades | 9466 CFM | 120V | Black
This 72-inch commercial ceiling fan is a practical choice for indoor warehouses and gymnasiums needing air movement across up to 900 square feet. Its 9,466 CFM airflow, eight aluminum blades, and adjustable 50 to 110 RPM operation support effective ventilation, while sound below 45 dB suits occupied spaces. Included 6, 12, and 24-inch downrods and a wired single-fan wall controller simplify installation and speed control. Minimum mounting height is 10 feet.
Dwayne Kula | President, CTO and Founder
43 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Diameter | 72 in |
| Color | Black |
| Blade Material | Aluminum |
| Controller | Yes |
| Blades | 8 |
| AMPs | .375 |
| Frequency (hz) | 50/60 |
| Fan CFM | 9466 |
| Coverage Area (sq ft) | 900 |
| RPM | High 110 Low 50 |
| Sound Level (db) | <45 |
| Fan Weight (lbs) | 34.2 |
| Downrod (in) | 6 |
| Voltage | 120V |
| Warranty | 10 year motor | 2 years parts |
6, 12 and 24 inch down rods are included with every fan. Each fan also includes a wired wall controller for on/off and speed control. The controller is designed to operate one fan.
Additional Resources
Product Overview
This 72-inch commercial ceiling fan provides indoor air movement for warehouse ventilation, manufacturing facility ventilation, gymnasium ventilation, and similar large indoor spaces within the supported application set. It uses eight aluminum blades and produces up to 9,466 CFM.
The fan has a black finish, a 72-inch diameter, and a 34.2-pound fixture weight. Minimum mounting height is 10 feet.
Core Performance and Output
Airflow is rated at 9,466 CFM with a listed coverage area of 900 square feet. The fan operates from 50 RPM on low speed to 110 RPM on high speed.
Electrical operation is 120V, 50/60 Hz, and 0.375 amps. The listed sound level is below 45 dB.
Coverage and airflow distribution depend on mounting height, fan location, and surrounding obstructions. A single fan may not provide uniform air movement across layouts larger than the listed coverage area.
Adjustability and Control Options
A wired wall controller is included for on/off operation and speed control. The controller is designed to operate one fan.
The fan includes 6-inch, 12-inch, and 24-inch downrods. Downrod selection affects the installed fan position below the ceiling structure.
Longevity and Reliability
The motor carries a 10-year warranty. Parts carry a 2-year warranty.
The aluminum blade construction supports a 34.2-pound fan assembly. Long-term operation depends on secure mounting, correct electrical connection, and periodic inspection of the fan and controls.
Build Quality and Physical Characteristics
This fan uses eight aluminum blades with a 72-inch overall diameter. The black finish fits exposed ceiling installations where the fan remains visible from the occupied area.
The fixture weight is 34.2 pounds. Included downrods provide 6-inch, 12-inch, and 24-inch installation options.
Where This Product Fits Best
This fan fits indoor ventilation layouts that need air movement over a defined coverage area. Its 9,466 CFM output and 72-inch blade span align with larger open-area ventilation applications.
- warehouse ventilation
- gymnasium ventilation
- manufacturing facility ventilation
- distribution center ventilation
- aircraft hangar ventilation
- convention center ventilation
Indoor use is specified. The installation location must provide the required minimum 10-foot mounting height and adequate clearance for the 72-inch blade diameter.
Installation and Long-Term Use
Install the fan at a minimum mounting height of 10 feet. Select the included 6-inch, 12-inch, or 24-inch downrod based on the ceiling structure and required installed position.
The wall controller operates one fan and requires a wired installation location. Confirm the mounting structure supports the 34.2-pound fan weight before installation.
How This Fixture Is Commonly Used
For warehouse ventilation, manufacturing facility ventilation, and distribution center ventilation, the fan is positioned to support air movement across the listed 900-square-foot coverage area. Layouts should account for ceiling structure, fan location, and areas where airflow is needed.
For gymnasium ventilation, aircraft hangar ventilation, and convention center ventilation, fan placement follows the occupied-area layout and available mounting height. Spacing varies with the required air movement pattern and the relationship between adjacent fan coverage areas.
Safety, Certifications, and Warranty
This fan is specified for indoor use and 120V operation. Minimum mounting height is 10 feet.
The motor warranty is 10 years. The parts warranty is 2 years.
Frequently Asked Questions
Q: What is the airflow rating of this 72-inch commercial ceiling fan?
A: The fan is rated at 9,466 CFM.
Q: What voltage does this fan require?
A: The fan operates at 120V and 50/60 Hz.
Q: Is a controller included?
A: Yes. A wired wall controller is included for on/off operation and speed control. One controller is designed to operate one fan.
Q: What downrod lengths are included?
A: The fan includes 6-inch, 12-inch, and 24-inch downrods.
Q: What coverage area is listed for layout planning?
A: The listed coverage area is 900 square feet. Final fan placement also depends on mounting height, fan location, and the required air movement pattern.
Application Questions and Clarification
Q: Is this fan suitable for warehouse ventilation?
A: Warehouse ventilation is a supported primary application. The fan provides 9,466 CFM and has a listed coverage area of 900 square feet.
Q: Can this fan be used for gymnasium ventilation?
A: Gymnasium ventilation is a supported primary application. The minimum mounting height is 10 feet.
Q: What should be confirmed before using this fan for aircraft hangar ventilation or convention center ventilation?
A: Confirm the available mounting height, mounting structure, required airflow pattern, and the number of coverage areas needed. The supplied data lists 900 square feet of coverage per fan.
Web ID: 2743
