80 Inch Commercial Ceiling Fan | 7 Blades | 11,274 CFM | 120V | Bronze

Product Overview

This 80 inch commercial ceiling fan is designed for large open spaces that require consistent air movement and coverage. The fan features seven aluminum blades, a five-speed controller, and a reversible function for year-round use. It is suitable for installation in environments where air circulation is critical for occupant comfort and operational efficiency, such as warehouses and manufacturing facilities.

The fan operates on 120V and is UL Wet locations rated, allowing for installation in both indoor and covered outdoor commercial settings. With a minimum mounting height of 10 feet and a minimum horizontal clearance of 30 inches, it is intended for high-ceiling applications where wide-area airflow is needed.

Core Performance and Output

This fan delivers a maximum airflow of 11,274 CFM at its highest speed and 6,707 CFM at its lowest, supporting coverage for areas up to 1,089 square feet. The seven-blade design and 18-degree blade pitch provide broad, even air distribution across large floor areas. Five selectable speeds allow for precise control of airflow intensity to match seasonal or operational requirements.

At high speed, the fan operates at 101 RPM, while low speed delivers 61 RPM. Excessive airflow may occur if installed below the recommended 10-foot mounting height, and coverage may be reduced in spaces with significant obstructions or irregular layouts.

Adjustability and Control Options

The fan includes a five-speed controller for on-demand adjustment of airflow. The reversible function allows for seasonal operation, supporting both cooling and destratification modes. The controller enables quick changes between speed settings to adapt to occupancy or process needs.

Blade direction can be reversed to optimize air movement for either summer cooling or winter heat redistribution. The fan?s adjustability supports a range of operational scenarios in commercial and industrial environments.

Longevity and Reliability

The fan uses aluminum blades and a robust 180 x 17 mm motor for long-term operation in demanding environments. The UL Wet locations rating ensures resistance to moisture and humidity, supporting installation in covered outdoor or semi-exposed areas.

Routine maintenance is limited to periodic cleaning and inspection of mounting hardware. The fan is backed by a 1-year warranty, reflecting standard commercial reliability expectations for this product class.

Build Quality and Physical Characteristics

The fan measures 80 inches in diameter and weighs 35.3 lbs. Seven aluminum blades are pitched at 18 degrees for optimal airflow and durability. The bronze finish provides a neutral appearance suitable for most commercial interiors.

An 8-inch downrod is included for secure mounting, and the fan requires a minimum mounting height of 10 feet. The minimum horizontal clearance is 30 inches from any obstruction or wall. All components are designed for commercial duty and frequent operation.

Where This Product Fits Best

This ceiling fan is intended for large commercial and industrial spaces with high ceilings and a need for consistent air movement. It is suitable for both indoor and covered outdoor environments where UL Wet location compliance is required.

• warehouse ventilation
• manufacturing facility ventilation
• distribution center ventilation
• gymnasium ventilation
• aircraft hangar ventilation
• convention center ventilation
• large retail ventilation

The fan is designed for environments with high ceilings, open layouts, and minimal obstructions. It is not intended for low-ceiling spaces or areas with significant overhead equipment that would interfere with airflow or blade clearance.

Installation and Long-Term Use

Installation requires a minimum mounting height of 10 feet and at least 30 inches of horizontal clearance from walls or obstructions. The included 8-inch downrod supports secure attachment to structural ceiling members. The fan operates on standard 120V circuits and is compatible with most commercial electrical systems.

Routine maintenance includes periodic cleaning of blades and inspection of mounting hardware. The aluminum construction and UL Wet locations rating support use in environments with moderate humidity or occasional moisture exposure. Long-term reliability is supported by robust materials and a commercial-grade motor.

How This Fixture Is Commonly Used

This fan is typically installed in open areas with ceiling heights of 12 feet or higher. Spacing between fans depends on the size of the area and desired airflow, with one fan covering approximately 1,089 square feet under typical conditions. In larger spaces, multiple fans are spaced to ensure overlapping airflow zones.

Mounting height and blade clearance must be verified before installation. Higher output settings reduce the number of fans needed but may increase air velocity and noise, especially in acoustically sensitive environments.

Safety, Certifications, and Warranty

This fan is UL Wet locations rated. All electrical and mechanical components are designed for commercial use. The product includes a 1-year warranty covering materials and workmanship under normal operating conditions.

Installation must comply with local codes and manufacturer guidelines for mounting height and clearance. The fan?s construction and certification support use in both indoor and covered outdoor commercial environments.

Frequently Asked Questions

Q: What is the minimum ceiling height required for this fan?

A: The minimum mounting height is 10 feet from the floor to the blades.

Q: How much area does one fan cover?

A: One fan covers up to 1,089 square feet under typical conditions.

Q: Can this fan be installed in wet or humid environments?

A: Yes, the fan is UL Wet locations rated for use in covered outdoor or humid indoor areas.

Q: Is the fan speed adjustable?

A: Yes, the fan has five selectable speeds controlled by the included controller.

Q: Does the fan support reversible operation for winter and summer use?

A: Yes, the reversible function allows for both cooling and destratification modes.

Q: What is the recommended spacing between multiple fans in a large facility?

A: Spacing depends on ceiling height and airflow needs, but typically one fan is used per 1,000 to 1,200 square feet for uniform coverage.

Application Questions and Clarification

Q: Is this fan suitable for use in a warehouse with 14-foot ceilings?

A: Yes, the fan is appropriate for warehouse ventilation in spaces with ceilings 12 feet or higher.

Q: Can this fan be used in a gymnasium or sports facility?

A: Yes, it is commonly installed for gymnasium ventilation and other large indoor sports environments.

Q: Is this fan appropriate for use in an aircraft hangar?

A: Yes, the fan is suitable for aircraft hangar ventilation where high ceilings and open layouts are present.

Q: Can this fan be installed in a convention center or large retail space?

A: Yes, it is used for ventilation in convention centers and large retail environments with sufficient ceiling height and clearance.