32 / 40 / 48 Watt Adjustable LED Wraparound Light | 3840 to 5760 Lumens | 3500K / 4000K / 5000K | 100-277V

Product Overview

This 4-foot LED shop strip light delivers field-adjustable wattage at 30, 40, or 50 watts with corresponding lumen outputs of 4,200, 5,300, or 6,500 lumens. Color temperature is also adjustable on-site between 3500K, 4000K, and 5000K. The fixture operates on 100-277V input and is designed as a direct replacement for fluorescent strip fixtures.

Construction uses galvanized steel housing with a frosted polycarbonate lens and white finish. The fixture measures 47 inches long by 2.5 inches wide by 2.5 inches high and weighs 4.3 pounds. Rated lifespan is 50,000 hours at L70, with a CRI of 80+ and power factor greater than 0.90.

Dimming is supported via 1-10V protocol. The fixture is UL listed and DLC Premium qualified. A motion sensor is available as an accessory.

Where This Product Fits Best

This strip light is sized and configured for workshops, maintenance areas, back-of-house spaces, utility corridors, storage rooms, and other general-purpose commercial environments where fluorescent strips are currently installed. The 4-foot form factor matches standard fluorescent strip dimensions, simplifying replacement layouts.

Operating temperature range spans -4°F to 113°F, supporting use in unconditioned spaces such as garages, mechanical rooms, and covered loading areas. The 120-degree beam angle provides broad, even distribution suited to ceiling-mounted surface applications in spaces with standard ceiling heights.

Performance and Functional Considerations

At 133 lumens per watt, the fixture delivers efficient output across all three wattage settings. The adjustable wattage allows the same fixture to serve spaces with different light level requirements. The 30-watt setting produces 4,200 lumens for lower-demand areas; the 50-watt setting reaches 6,500 lumens for spaces requiring higher output.

The selectable color temperature range covers warm (3500K), neutral (4000K), and cool (5000K) options. This allows matching to existing lighting in the facility or adjusting based on task requirements. The frosted polycarbonate lens diffuses output and reduces direct glare.

The 1-10V dimming compatibility allows connection to standard low-voltage dimming controls when reduced output or occupancy-based dimming is needed.

Installation and Long-Term Use

The fixture mounts directly to ceilings via surface mount. No cord is included, so hard-wired installation is required. Voltage compatibility across 100-277V at 50-60Hz accommodates most commercial electrical systems without requiring transformers or voltage-specific models.

Galvanized steel housing provides corrosion resistance in typical indoor commercial environments. At 4.3 pounds, the fixture is manageable for single-person installation on standard ceiling surfaces. Wattage and color temperature adjustments are made at the fixture before or during installation, eliminating the need for additional equipment or control systems to change output settings.

The 50,000-hour rated lifespan reduces replacement frequency compared to fluorescent systems. DLC Premium qualification may support utility rebate eligibility where applicable.

How This Fixture Is Commonly Used

Once installed, the wattage and color temperature settings are fixed based on the selections made during setup. Facilities with mixed-use areas often set wattage higher in task zones and lower in circulation or storage areas. Color temperature selection typically follows existing facility standards or user preference for warmer or cooler light appearance.

The 1-10V dimming input allows integration with building lighting controls or manual dimmer switches where installed. This is commonly used in spaces where light levels need to be reduced during certain hours or tied to occupancy systems. A compatible motion sensor accessory is available for installations requiring occupancy-based switching.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. The warranty covers 5 years from date of purchase.

Frequently Asked Questions

What voltages does this fixture support?
The fixture operates on 100-277V input at 50-60Hz.

What is the lumen output range?
Output ranges from 4,200 lumens at 30 watts to 6,500 lumens at 50 watts, with 5,300 lumens at the 40-watt setting.

Is this fixture dimmable?
Yes, the fixture supports 1-10V dimming.

What color temperatures are available?
The fixture is adjustable between 3500K, 4000K, and 5000K.

Is this fixture DLC listed?
Yes, this fixture is DLC Premium qualified.

What is the warranty period?
The fixture includes a 5-year warranty.

What does this fixture replace?
This fixture is designed as a replacement for fluorescent strip lights.

How is the fixture mounted?
The fixture is designed for surface mounting. No cord is included; hard-wired installation is required.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.