30 / 40 / 50 Watt Adjustable LED Strip Light | 4 Foot | 4200 to 7000 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | 8-Pack

Product Overview

This 4-foot LED strip light is a wattage and color adjustable linear fixture designed for general shop and task lighting. It is intended to replace traditional fluorescent strip lights in workshops, garages, and maintenance areas. The fixture supports both chain-cable and surface mounting, making it suitable for a range of ceiling types and installation conditions commonly found in small commercial and industrial spaces.

Typical mounting heights range from 8 to 14 feet. The fixture is often installed in environments where uniform, glare-free illumination is required for hands-on work, equipment repair, or tool use. The adjustable wattage and color temperature allow for on-site tuning to match existing lighting or specific visual requirements.

Core Performance and Output

This fixture delivers selectable output at 30, 40, or 50 watts, producing 4200, 5600, or 7000 lumens respectively. Efficacy is 140 lumens per watt. The 120-degree beam angle and frosted polycarbonate lens provide wide, diffuse coverage suitable for open work areas and bench spaces. Color temperature can be set to 3500K, 4000K, or 5000K as needed.

1-10V dimming is standard for integration with compatible controls. At maximum output, the fixture is best suited for mounting heights above 10 feet to avoid excessive brightness at eye level. Uniformity may decrease if fixtures are spaced too far apart in larger rooms.

Adjustability and Control Options

Wattage and color temperature are field adjustable via onboard switches, allowing adaptation to changing requirements or retrofit conditions. This flexibility supports both energy savings and visual comfort. The fixture is compatible with 1-10V dimming systems for further control over light levels.

No onboard occupancy or daylight sensors are included. External controls can be integrated as needed for advanced energy management or scheduling.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70) at typical operating conditions. The galvanized steel housing and polycarbonate lens provide durability for daily use in shop and maintenance environments. Operating temperature range is -4F to 122F, covering most indoor and semi-conditioned spaces.

All components are designed for consistent performance over the warranty period. No routine re-lamping is required. The fixture is intended for continuous or frequent switching cycles without reduced lifespan.

Build Quality and Physical Characteristics

The housing is constructed from galvanized steel with a white finish. The lens is frosted polycarbonate for glare reduction and even light distribution. Fixture dimensions are 48 x 3 x 3 inches, and weight is 4.3 lbs. No power cord is supplied; wiring is direct to the junction box or conduit as required by code.

Chain-cable and surface mounting hardware are included. The fixture is suitable for both new installations and retrofit projects where fluorescent strips are being replaced. The compact profile allows installation in tight spaces or low ceilings.

Where This Product Fits Best

This LED strip light is intended for indoor environments where reliable, adjustable linear lighting is needed for work, maintenance, or equipment repair. It is commonly installed in:

• workshop lighting
• maintenance shop lighting
• garage lighting
• service bay lighting
• small warehouse lighting
• tool room lighting
• automotive shop lighting
• equipment repair lighting

The fixture is suitable for dry or damp locations within the specified temperature range. It is not intended for wet locations or environments with corrosive chemicals. The adjustable output supports both task and general area lighting in small to medium spaces.

Installation and Long-Term Use

Chain-cable and surface mounting options allow installation on a variety of ceiling types, including open joist, drywall, or metal deck. The fixture is lightweight and can be handled by one person. Direct wiring is required; no plug-in cord is provided.

Maintenance requirements are minimal. Occasional cleaning of the lens and housing is recommended to maintain light output. The fixture is designed for easy access during installation and service. No special tools are needed for wattage or color adjustment.

How This Fixture Is Commonly Used

Fixtures are typically mounted at heights between 8 and 14 feet, spaced 6 to 12 feet apart depending on desired light levels and room size. In garages and workshops, rows are aligned over workbenches or equipment areas for direct task illumination.

In service bays and maintenance shops, fixtures are often installed in parallel rows to provide uniform coverage. Higher output settings reduce the number of fixtures needed but may increase glare if mounted too low. Spacing and output should be selected based on ceiling height and visual requirements.

Safety, Certifications, and Warranty

This fixture is UL listed and meets all applicable safety standards for commercial and industrial lighting. It is eligible for utility rebates where available. The product includes a 5-year warranty covering manufacturing defects and performance.

All electrical connections must comply with local codes. The fixture is suitable for use on 100-277V circuits at 50/60 Hz. No hazardous materials are present in the construction.

Frequently Asked Questions

Q: What is the recommended mounting height for this fixture?

A: Typical mounting heights are 8 to 14 feet, depending on the output setting and application.

Q: Can the fixture be surface mounted directly to drywall or metal ceilings?

A: Yes, surface mounting hardware is included for direct installation to drywall, wood, or metal ceilings.

Q: Is this fixture compatible with plug-in power cords?

A: No, the fixture is designed for hardwired installation only. No cord is supplied.

Q: How is wattage and color temperature adjusted?

A: Both wattage and color temperature are set using onboard switches accessible during installation or maintenance.

Q: How many fixtures are needed for a typical two-car garage?

A: Two to four fixtures are commonly used, depending on desired light levels and mounting height.

Application Questions and Clarification

Q: Is this fixture suitable for use in automotive repair shops?

A: Yes, it is commonly installed in automotive shop lighting and equipment repair lighting applications.

Q: Can this fixture be used in small warehouse spaces?

A: Yes, it is suitable for small warehouse lighting where mounting heights and area size match the output range.

Q: Is this fixture appropriate for tool rooms or maintenance areas?

A: Yes, it is frequently used in tool room lighting and maintenance shop lighting environments.

Q: Does this fixture support continuous row mounting?

A: No, this model is not designed for continuous row installation. Each fixture is mounted individually.