30 / 35 / 40 Watt Adjustable LED Wraparound Light | 4110 to 5240 Lumens | 3500K / 4000K / 5000K | 100-277V

Product Overview

This adjustable LED wraparound shop light is designed for general-purpose task and area lighting in commercial and industrial environments. The fixture offers selectable wattage (30, 35, or 40 watts) and color temperature (3500K, 4000K, or 5000K), providing flexibility for a range of workspace requirements. Typical use cases include workshops, maintenance shops, garages, and service bays where consistent, uniform illumination is needed for daily operations.

The linear form factor and surface-mount design allow for straightforward installation on ceilings or overhead structures. This fixture is commonly used as a direct replacement for 100W or 150W metal halide or fluorescent strip lights, especially in retrofit scenarios where energy efficiency and reduced maintenance are priorities.

Core Performance and Output

This fixture delivers 4110 to 5240 lumens, depending on the selected wattage, with an efficacy of 131 lumens per watt. The 120° beam angle and frosted lens provide wide, even light distribution suitable for task areas and general workspace coverage. Color temperature can be set to 3500K, 4000K, or 5000K to match application needs or existing lighting conditions.

1-10V dimming is standard, supporting integration with compatible controls for further energy management. Output levels are appropriate for mounting heights up to approximately 12 feet. At lower mounting heights, the highest wattage setting may produce excessive brightness or glare in smaller rooms.

Adjustability and Control Options

Both wattage and color temperature are field-selectable via onboard switches, allowing adjustment during installation or future reconfiguration. This supports changes in workspace layout or lighting requirements without fixture replacement. The fixture is compatible with standard 1-10V dimming systems for manual or automated control.

No onboard occupancy or daylight sensors are included. External controls can be added if required for advanced energy management or scheduling.

Longevity and Reliability

The fixture is rated for 70,000 hours of L70 life, minimizing relamping and maintenance cycles in typical shop and garage environments. The LED driver and components are designed for continuous operation within the specified voltage range (100-277V, 50/60Hz).

Galvanized steel housing and a frosted polycarbonate lens provide durability for daily use. The fixture is UL listed and covered by a 5-year warranty. IP20 rating limits use to dry, indoor locations without exposure to moisture or dust ingress.

Build Quality and Physical Characteristics

The housing is constructed from galvanized steel with a white finish. The fixture measures 47.7 inches long by 7.1 inches wide and weighs 7.94 lbs. Surface mounting hardware is included for direct attachment to ceilings or overhead structures.

The frosted lens diffuses light to reduce glare and improve visual comfort. No cord is supplied; hardwired connection is required. The fixture is designed for fixed, surface-mounted installations and is not intended for suspended or pendant mounting.

Where This Product Fits Best

This LED wraparound shop light is suited for indoor, dry environments where uniform task or area lighting is required. Typical installations include workshops, garages, and service bays, as well as smaller warehouse or tool room spaces where mounting heights are moderate and IP20 is acceptable.

• workshop lighting
• maintenance shop lighting
• garage lighting
• service bay lighting
• small warehouse lighting
• tool room lighting
• automotive shop lighting
• equipment repair lighting

Environments must be dry and free from excessive dust or moisture. Not suitable for wet locations, washdown areas, or spaces requiring vapor-tight or hazardous location ratings.

Installation and Long-Term Use

Surface mounting is standard, with direct attachment to flat ceilings or overhead structures. The fixture is designed for hardwired connection to 100-277V circuits. Installation is straightforward for experienced personnel familiar with linear strip or wraparound fixtures.

Routine cleaning of the lens and housing is recommended to maintain light output. No relamping is required during the rated life. If color temperature or wattage needs change, adjustments can be made via onboard switches without removing the fixture.

How This Fixture Is Commonly Used

Fixtures are typically installed in rows or grids, spaced 6 to 12 feet apart depending on ceiling height, desired light levels, and workspace layout. Mounting heights generally range from 8 to 12 feet. For larger areas, multiple fixtures are used to achieve uniform coverage.

Higher wattage settings reduce the number of fixtures needed but may increase glare in confined spaces. Spacing and output should be matched to the size and reflectivity of the area for optimal results.

Safety, Certifications, and Warranty

This fixture is UL listed and IP20 rated. It meets standard requirements for indoor, dry-location lighting in commercial and industrial settings. Power factor is greater than 0.90, and CRI is 80+ for accurate color rendering in task environments.

The product is covered by a 5-year warranty. No special safety procedures are required beyond standard electrical installation and maintenance practices for surface-mounted shop lights.

Frequently Asked Questions

Q: What is the maximum recommended mounting height for this fixture?

A: Mounting heights up to 12 feet are typical for effective task and area lighting with this output level.

Q: Can this fixture be suspended or pendant mounted?

A: No, this fixture is designed for surface mounting only and does not support suspension or pendant installation.

Q: Is this fixture suitable for damp or wet locations?

A: No, the IP20 rating limits use to dry, indoor environments only.

Q: How are wattage and color temperature adjusted?

A: Both settings are adjusted via onboard switches accessible during installation or maintenance.

Q: What is the recommended spacing between fixtures?

A: Spacing typically ranges from 6 to 12 feet, depending on mounting height and required light levels.

Application Questions and Clarification

Q: Is this fixture appropriate for use in a small warehouse or tool room?

A: Yes, the output and form factor are suitable for small warehouse lighting and tool room lighting within dry, indoor environments.

Q: Can this fixture be used in an automotive shop or equipment repair area?

A: Yes, it is commonly installed in automotive shops and equipment repair spaces where surface-mounted, uniform lighting is needed.

Q: Is this fixture recommended for washdown or food processing areas?

A: No, this fixture is not rated for wet or washdown environments and should not be used in those applications.