300 / 450 / 600 Watt Adjustable High Bay Sports Light | 46500 to 93000 Lumens | 5000K | 100-277V

Product Overview

This adjustable LED UFO high bay delivers 30,000 to 48,000 lumens across three selectable wattage settings: 200W, 240W, and 320W. Output efficiency holds steady at 150 lumens per watt across all settings. The fixture replaces 1000-watt metal halide systems and operates on 100-277V input at 50/60 Hz.

Color temperature is field-adjustable between 4000K and 5000K, and the fixture maintains a CRI of 80+ at either setting. The standard beam angle is 110 degrees through a polycarbonate lens. Dimming is supported via 0-10V protocol.

The die-cast aluminum housing is available in black or white. Physical dimensions are 13.8 x 9.5 inches, and the fixture weighs 13 pounds. A 5-foot power cord and 8-inch dimming cord are included. Mounting is via hook.

Where This Product Fits Best

This fixture is sized and rated for industrial and commercial spaces where 1000-watt metal halide systems are currently installed. Warehouses, manufacturing floors, and distribution centers with high ceilings and broad open areas are typical environments. The 110-degree beam angle supports wide coverage from elevated mounting positions.

The IP65 rating allows installation in spaces with dust, airborne particulates, and water spray from any direction. The IK10 rating provides protection against physical impact, which matters in active facilities with forklift traffic or overhead crane movement. The operating temperature range of -40°F to 122°F supports both cold storage environments and spaces with significant process heat.

Facilities running 100V to 277V systems can install this fixture without voltage-specific concerns. The 6kV surge protection supports installation in buildings with inconsistent power or environments prone to electrical transients.

Performance and Functional Considerations

The three wattage settings allow the fixture to be configured based on actual light level requirements at the point of installation. At 200W, output is 30,000 lumens. At 240W, output is 36,000 lumens. At 320W, output reaches 48,000 lumens. All settings maintain 150 lumens per watt.

Color temperature selection between 4000K and 5000K allows the fixture to match existing installations or to be configured based on task visibility preferences. The 80+ CRI supports accurate color rendering for inspection, labeling, and general visibility tasks.

The 0-10V dimming input allows integration with building management systems or standalone dimmers where light level control is needed. A motion sensor is available as an accessory. Rated lifespan is 50,000 hours at L70.

Installation and Long-Term Use

The fixture mounts via hook, which is standard for UFO high bay installations suspended from chains, cables, or pendant drops. The 5-foot power cord provides working length for typical junction box positions. The 8-inch dimming cord is intended for local connection to 0-10V control wiring.

At 13 pounds, the fixture is manageable for single-person installation in most conditions, though rigging at height may require standard lift equipment. The die-cast aluminum housing supports heat dissipation and resists corrosion in humid or dusty environments.

The IP65 and IK10 ratings mean the fixture tolerates washdown environments and incidental contact without requiring additional protective enclosures. Lens material is polycarbonate, which resists shattering under impact.

How This Fixture Is Commonly Used

In most installations, the wattage and color temperature are configured once during commissioning and left in place. Facilities replacing metal halide systems often start at the 320W setting for direct equivalence, then reduce wattage if light levels exceed requirements. This avoids over-lighting and reduces energy draw without additional equipment.

The 4000K setting produces a neutral white output often preferred in manufacturing and inspection areas. The 5000K setting produces a cooler, daylight-type output that some facilities use to improve alertness or match natural light in spaces with skylights or clerestory windows.

Dimming via 0-10V is typically used in spaces with daylight harvesting controls or occupancy-based automation. Where dimming is not needed, the dimming leads can be capped and left unused. A motion sensor accessory is available for installations requiring occupancy-based switching.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. The 6kV surge protection rating supports installation in facilities with variable power quality.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What wattage options are available on this fixture?
The fixture is adjustable to 200W, 240W, or 320W. Output corresponds to 30,000, 36,000, or 48,000 lumens respectively.

What voltage does this fixture accept?
The fixture operates on 100-277V at 50/60 Hz.

Is this fixture DLC listed?
Yes. This fixture is DLC Premium qualified.

What is the IP rating?
The fixture is rated IP65. It can be installed in areas exposed to dust and water spray without additional protection.

What color temperatures are available?
The fixture is adjustable between 4000K and 5000K.

What is the warranty?
We provide a 5-year warranty on this fixture.

What does this fixture replace?
This fixture is a replacement for 1000-watt metal halide systems.

What housing colors are available?
The fixture is available in black or white housing.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.