200 / 240 / 320 Watt Adjustable LED UFO High Bay | 30000 to 48000 Lumens | 4000K / 5000K Adjustable | 100-277V | Black or White Housing

Product Overview

This adjustable LED UFO high bay delivers 30,000 to 48,000 lumens across three wattage settings: 200W, 240W, and 320W. Output and color temperature are configured on the fixture itself, with 4000K and 5000K options available. At 150 lumens per watt, this fixture replaces 1000W metal halide systems.

The die-cast aluminum housing is available in black or white and measures 13.8 x 9.5 inches. A standard 110-degree beam angle with polycarbonate lens provides broad coverage without additional optics. The fixture weighs 13 lbs and includes a 5-foot power cord and 8-inch dimming cord.

This high bay operates on 100-277V input at 50/60 Hz and supports 0-10V dimming. Rated life is 50,000 hours at L70, with CRI greater than 80.

Where This Product Fits Best

The IP65 rating means this fixture handles dust exposure and water spray from any direction. That makes it suitable for wash-down areas, loading docks, food processing spaces, and facilities where airborne particulates or moisture are present during normal operations.

IK10 impact resistance allows installation in environments where contact with equipment, forklifts, or falling debris is possible. The 6kV surge protection provides tolerance for electrical disturbances common in industrial facilities with heavy motor loads or unstable power conditions.

Operating temperature range spans -40°F to 122°F, supporting installation in cold storage, unconditioned warehouses, and facilities with elevated ambient temperatures from process heat or limited HVAC.

Performance and Functional Considerations

The three wattage settings allow output adjustment between 30,000, 36,000, and 48,000 lumens depending on mounting height and target light levels. Color temperature is also selectable between 4000K and 5000K to match existing fixtures or tenant preferences.

At 150 lumens per watt across all output levels, efficiency remains consistent regardless of wattage selection. The 110-degree beam angle is fixed and provides wide distribution suited to general area lighting rather than aisle-specific or narrow-beam applications.

The 0-10V dimming capability allows integration with building management systems, daylight harvesting controls, or manual dimmers. The 8-inch dimming cord connects to compatible control wiring at the fixture location.

Installation and Long-Term Use

Mounting uses a hook system, typical for chain or pendant suspension from bar joists, purlins, or other overhead structure. The 5-foot cord length accommodates standard junction box placement above drop ceilings or exposed structure without requiring extension.

Wattage and color temperature adjustments are made directly on the fixture prior to final mounting. Once configured, no additional access is required for output changes unless site conditions or layout requirements change.

At 13 lbs, the fixture is manageable for single-person installation in most lift-accessible applications. The die-cast aluminum housing dissipates heat effectively and resists corrosion in humid or mildly corrosive environments.

How This Fixture Is Commonly Used

Facilities replacing 1000W metal halide high bays typically select this fixture for one-to-one retrofit where existing circuit and mounting locations remain in use. The hook mount matches common chain or cable suspension methods already in place.

The wattage selector lets you tune output to current conditions. If a space transitions from storage to active picking or assembly, increasing wattage provides higher light levels without replacing the fixture. The same applies in reverse when areas shift to lower-intensity use.

Color temperature selection addresses tenant or task preferences. 4000K suits spaces where a warmer appearance is preferred, while 5000K provides a cooler, higher-contrast environment for detailed inspection or reading tasks.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. The DLC Premium listing may support utility rebate eligibility depending on local program requirements.

A motion sensor is available as an accessory for occupancy-based control. The fixture includes 6kV surge protection as standard.

We provide a 5-year warranty on this product.

Frequently Asked Questions

What wattage and lumen options are available?
The fixture is adjustable between 200W, 240W, and 320W, producing 30,000, 36,000, or 48,000 lumens respectively.

What color temperatures can I select?
4000K and 5000K are both available. Selection is made on the fixture.

What voltage does this fixture require?
It operates on 100-277V at 50/60 Hz.

Is this fixture DLC listed for rebates?
Yes, it is DLC Premium qualified.

What is the IP rating?
IP65. The fixture is protected against dust ingress and water spray from any direction.

What is the warranty?
5 years.

What housing colors are available?
Black or white.

Does this fixture support dimming?
Yes, 0-10V dimming is supported.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.