24 Watt 16 Inch LED Flush Mounted Ceiling Light | 1700 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 24 Watt 16 Inch LED Flush Mounted Ceiling Light is a surface-mounted round fixture designed for commercial and utility environments requiring reliable, low-profile ceiling lighting. The fixture delivers 1700 lumens and supports selectable color temperatures of 3000K, 4000K, or 5000K. It operates on 100-277V and is suitable for continuous use in corridors, utility spaces, and low ceiling areas. Typical installations include commercial hallways, storage rooms, and back-of-house locations where consistent, even illumination is required.

The fixture features a brushed nickel finish and a 16-inch round form factor. It is commonly used as a direct replacement for 75W incandescent ceiling lights in commercial and institutional settings. Surface mounting simplifies installation in retrofit and new construction projects where recessed or suspended fixtures are not practical.

Core Performance and Output

This fixture provides 1700 lumens at 24 watts, achieving an efficacy of 71 lumens per watt. The 120° beam angle and acrylic lens deliver wide, uniform coverage suitable for general area lighting in corridors and utility spaces. Color temperature can be set to 3000K, 4000K, or 5000K at installation, supporting a range of visual requirements from warm to neutral white.

Triac dimming is supported for applications requiring adjustable light levels. Output is appropriate for ceiling heights up to approximately 10 feet; at lower heights, light levels may be higher than necessary for some tasks. For larger or higher-ceilinged spaces, multiple fixtures may be required to achieve uniform coverage.

Adjustability and Control Options

The fixture includes a field-selectable color temperature switch, allowing the installer to choose between 3000K, 4000K, or 5000K during installation. This supports adaptation to changing visual or aesthetic requirements without replacing the fixture. Triac dimming compatibility enables integration with standard wall dimmers for adjustable output.

No advanced controls or networked lighting options are included. The fixture is designed for straightforward, standalone operation in environments where basic adjustability is sufficient.

Longevity and Reliability

The fixture is rated for 50,000 hours of operation, supporting long-term use in commercial and utility environments with minimal maintenance. The solid-state LED design eliminates lamp replacements and reduces service intervals compared to legacy incandescent or fluorescent fixtures.

Operating temperature range is -4°F to 122°F, suitable for conditioned and unconditioned interior spaces. The fixture is covered by a 5-year warranty.

Build Quality and Physical Characteristics

The housing is constructed from stainless steel with a brushed nickel finish, providing durability and resistance to corrosion in typical indoor environments. The acrylic lens is impact-resistant and supports uniform light distribution. The fixture weighs 2.5 lbs and measures 16 inches in diameter, supporting installation on standard ceiling junction boxes.

Surface mounting hardware is included. The low-profile design minimizes intrusion into occupied space and is suitable for low ceiling applications.

Where This Product Fits Best

This fixture is designed for commercial and utility environments requiring surface-mounted ceiling lighting with selectable color temperature and moderate output. It is most commonly installed in corridors, utility spaces, and low ceiling areas where recessed or suspended fixtures are not suitable.

• commercial ceiling lighting
• corridor lighting
• utility space lighting
• low ceiling lighting
• storage room lighting
• back-of-house lighting
• maintenance area lighting
• small retail lighting

The fixture is suitable for dry and damp interior locations. It is not intended for exterior, wet, or hazardous environments.

Installation and Long-Term Use

Surface mounting is supported on standard ceiling junction boxes. The fixture?s 16-inch diameter and 2.5 lb weight allow for single-person installation in most cases. Color temperature selection is made at the time of installation using the integrated switch.

Routine cleaning of the acrylic lens and periodic inspection of mounting hardware are recommended for long-term reliability. No lamp or ballast replacements are required. The fixture is compatible with most commercial dimmers supporting Triac dimming.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 10 feet, supporting uniform illumination in corridors, storage rooms, and utility spaces. Fixtures are often spaced 8 to 12 feet apart, depending on ceiling height and required light levels. In longer corridors or larger rooms, additional fixtures may be installed to maintain consistent coverage.

Spacing and fixture count should be adjusted based on the selected color temperature and desired illumination. Higher output may reduce the number of fixtures needed but can increase perceived brightness in smaller spaces.

Safety, Certifications, and Warranty

This fixture is ETL certified and meets applicable safety standards for commercial lighting. It is eligible for utility rebates where available. The product is covered by a 5-year warranty from the date of installation.

No additional safety features or emergency backup are included. The fixture is intended for use in standard commercial and utility interior environments.

Frequently Asked Questions

Q: What is the maximum recommended mounting height for this fixture?

A: The fixture is best suited for ceiling heights up to 10 feet to maintain effective light levels and uniformity.

Q: Can the color temperature be changed after installation?

A: The color temperature can be adjusted using the integrated switch, but access to the fixture is required to make changes after installation.

Q: Is this fixture compatible with standard wall dimmers?

A: Yes, it supports Triac dimming and can be used with most commercial-grade wall dimmers.

Q: What is the expected lifespan of the fixture?

A: The fixture is rated for 50,000 hours of operation under normal conditions.

Q: How should fixtures be spaced in a corridor application?

A: Spacing of 8 to 12 feet between fixtures is typical, depending on ceiling height and required light levels.

Application Questions and Clarification

Q: Is this fixture suitable for use in wet or exterior locations?

A: No, this fixture is intended for dry or damp interior environments only.

Q: Can this fixture be installed on a wall instead of a ceiling?

A: The fixture is designed for ceiling surface mounting; wall mounting is not recommended due to beam distribution and appearance.

Q: Does the fixture require any special maintenance?

A: Routine cleaning of the lens and periodic inspection of mounting hardware are sufficient; no lamp or ballast replacements are needed.