21 Watt 14 Inch LED Flush Mounted Ceiling Light | 1460 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This is a 21 watt LED surface mount fixture with a brushed nickel finish. It produces 1460 lumens at 70 lumens per watt and is designed to replace 75W incandescent fixtures.

The fixture operates on 100V-277V and supports both 50 and 60 Hz electrical systems. It offers selectable color temperature options of 3000K, 4000K, or 5000K, with a CRI of 80+.

The beam angle is 120 degrees, delivered through an acrylic lens. The fixture is 14 inches in diameter and weighs 2.5 lbs.

It uses a stainless steel housing and is rated for a 50,000 hour lifespan. Triac dimming is supported.

Where This Product Fits Best

This fixture is suitable for locations where a surface-mounted, round LED is needed to replace legacy 75W incandescent fixtures. It is compatible with a wide range of commercial and light industrial environments that require a brushed nickel finish and a low-profile appearance.

It can be used in spaces where color temperature flexibility is important, such as offices, corridors, break rooms, or utility areas. The fixture's 100V-277V voltage range supports installation in most standard commercial electrical systems.

With an operating temperature range of -4°F to 122°F, this fixture can be used in both conditioned and some unconditioned indoor environments. The stainless steel housing provides durability for locations where impact or corrosion resistance is needed.

Performance and Functional Considerations

The fixture delivers 1460 lumens, providing general illumination suitable for areas previously lit by 75W incandescent fixtures. The 120 degree beam angle offers wide coverage for open spaces or rooms with lower ceilings.

Selectable color temperature allows adjustment between 3000K, 4000K, and 5000K to match existing lighting or meet specific visual requirements. The CRI of 80+ supports accurate color rendering for most commercial tasks.

Triac dimming enables compatibility with standard wall dimmers for adjustable light output. The acrylic lens diffuses light evenly and reduces glare.

The fixture is designed for surface mounting and is not intended for recessed or pendant installations. The 50,000 hour rated lifespan supports long-term use with minimal maintenance.

Installation and Long-Term Use

This fixture is designed for surface mounting to flat ceilings or walls. The stainless steel housing and brushed nickel finish provide durability and a clean appearance after installation.

It operates on 100V-277V, allowing direct connection to most commercial electrical circuits without the need for voltage-specific adaptation. The fixture supports both 50 Hz and 60 Hz power supplies.

At 2.5 lbs, the fixture is lightweight and manageable for single-person installation. The 14 inch round profile covers standard junction boxes and provides a finished look.

Routine cleaning of the acrylic lens and periodic inspection of mounting hardware are recommended for long-term reliability. The fixture is rated for operation in environments from -4°F to 122°F.

How This Fixture Is Commonly Used

After installation, you can select the preferred color temperature?3000K, 4000K, or 5000K?based on the needs of the space. This allows you to match the fixture to other lighting or adjust for occupant preference.

The fixture supports triac dimming, so you can use standard wall dimmers to adjust light levels as needed. This is useful in spaces where lighting requirements change throughout the day.

The wide 120 degree beam angle provides even illumination across the area, reducing shadows and supporting general visibility. The acrylic lens helps diffuse the light for a softer appearance.

Once installed, the fixture requires minimal attention aside from occasional cleaning. The stainless steel housing and brushed nickel finish maintain their appearance over time in most indoor environments.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is rebate eligible.

The stainless steel housing and acrylic lens are designed for durability in commercial environments. The fixture is rated for operation from -4°F to 122°F.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V.

What is the output and replacement class?
The fixture produces 1460 lumens and is designed to replace 75W incandescent fixtures.

What mounting method is supported?
This fixture is designed for surface mounting.

What certifications does this fixture carry?
This fixture is ETL listed and rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.