20 Watt 12 In LED Flush Mounted Ceiling Light | 1400 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 20 Watt 12 Inch LED Flush Mounted Ceiling Light is a round, surface-mounted fixture designed for general-purpose commercial and utility ceiling lighting. It delivers 1400 lumens and supports selectable color temperatures of 3000K, 4000K, or 5000K. The fixture operates on 100-277V and is suitable for low ceiling environments where recessed mounting is not possible or not preferred.

The brushed nickel finish and compact 12-inch round form factor allow for installation in corridors, utility spaces, and back-of-house areas. Typical mounting heights range from 8 to 12 feet, making this fixture a direct replacement for 75W incandescent flush mounts in commercial and institutional settings.

Core Performance and Output

This fixture provides 1400 lumens at 20 watts, with a delivered efficacy of 70 lumens per watt. The 120° beam angle and acrylic lens produce wide, even coverage suitable for general area illumination in low ceiling spaces. Color temperature can be set to 3000K, 4000K, or 5000K during installation to match site requirements.

Triac dimming is supported for basic output control. Output is appropriate for corridors, utility rooms, and small storage areas. At mounting heights above 12 feet, light levels may be insufficient for task-intensive applications. Excessive output is unlikely in typical low ceiling installations.

Adjustability and Control Options

The fixture includes a field-selectable color temperature switch, allowing installers to choose between 3000K, 4000K, or 5000K during setup. Triac dimming compatibility enables basic wall dimmer integration for adjustable light levels.

No advanced controls, sensors, or networked options are integrated. The fixture is intended for straightforward on/off or dimmed operation in standard commercial wiring environments.

Longevity and Reliability

Rated for 50,000 hours of operation, this fixture is designed for long-term use in commercial and utility environments. The LED array and driver are housed in a sealed enclosure to minimize dust and debris ingress.

Operating temperature range is -4°F to 122°F. The fixture is suitable for conditioned and unconditioned interior spaces within this range. No special maintenance is required beyond standard cleaning and periodic inspection.

Build Quality and Physical Characteristics

The fixture uses a stainless steel housing with a brushed nickel finish and an acrylic lens. The 12-inch round form factor and 2 lb weight allow for secure mounting to standard ceiling junction boxes or surface-mount plates.

All components are rated for commercial use. The fixture is ETL certified and meets requirements for rebate eligibility in many regions. The design is intended for durability in utility and back-of-house environments.

Where This Product Fits Best

This fixture is intended for low ceiling commercial and utility environments where surface mounting is required. It is commonly installed in corridors, storage rooms, and maintenance areas where uniform, general illumination is needed and recessed fixtures are not practical.

• commercial ceiling lighting
• corridor lighting
• utility space lighting
• low ceiling lighting
• storage room lighting
• back-of-house lighting
• maintenance area lighting
• small retail lighting

The fixture is suitable for dry and damp interior locations. It is not intended for exterior, wet, or hazardous environments. The low profile and wide beam make it appropriate for spaces with ceiling heights up to 12 feet.

Installation and Long-Term Use

Surface mounting is supported using standard ceiling junction boxes or compatible mounting plates. The fixture?s 2 lb weight allows for single-person installation in most cases. Color temperature selection is made prior to final mounting.

Routine cleaning of the acrylic lens and periodic inspection of mounting hardware are recommended. No relamping or driver replacement is required during the rated life. The fixture is designed for minimal maintenance in commercial settings.

How This Fixture Is Commonly Used

Typical mounting heights are 8 to 12 feet, with fixtures spaced to provide uniform coverage along corridors or within utility rooms. In storage or back-of-house areas, spacing is determined by required light levels and room geometry.

For corridor lighting, fixtures are often installed at 8 to 10 foot intervals. In utility or maintenance areas, layout may vary based on shelving or equipment placement. Higher output reduces fixture count but may increase perceived brightness in small rooms.

Safety, Certifications, and Warranty

This fixture is ETL certified and meets requirements for commercial interior lighting. It is eligible for utility rebates where applicable. All components are rated for safe operation within the specified temperature range.

A 5-year warranty covers defects in materials and workmanship. The fixture is designed for safe, long-term use in commercial and utility environments.

Frequently Asked Questions

Q: What is the maximum recommended mounting height for this fixture?

A: The fixture is designed for mounting heights up to 12 feet. Light levels may be insufficient above this height for general illumination.

Q: Can the color temperature be changed after installation?

A: Color temperature is selectable during installation. Changing it after mounting requires access to the fixture and removal from the ceiling.

Q: Is this fixture compatible with standard wall dimmers?

A: Yes, the fixture supports Triac dimming and can be used with compatible wall dimmers.

Q: What type of ceiling box or mounting plate is required?

A: The fixture mounts to standard ceiling junction boxes or compatible surface-mount plates rated for its weight and size.

Q: How many fixtures are needed for a 40-foot corridor?

A: For typical corridor lighting at 8 to 10 foot spacing, 4 to 5 fixtures are commonly used for a 40-foot run.

Application Questions and Clarification

Q: Is this fixture suitable for use in stairwells or storage rooms?

A: Yes, the fixture is commonly installed in stairwells, storage rooms, and other utility spaces with low ceilings.

Q: Can this fixture be used in wet or exterior locations?

A: No, this fixture is intended for dry or damp interior locations only. It is not rated for wet or exterior use.

Q: Does the fixture require any special maintenance?

A: No special maintenance is required beyond routine cleaning and periodic inspection of mounting hardware.