10 / 16 / 20 Watt Adjustable LED Outdoor Wall Sconce | 1200 to 2400 Lumens | 3000K / 4000K / 5000K | 100-277V | Built-In Photocell | Bronze or Black Housing

Product Overview

This LED wall sconce is designed for architectural wall lighting and exterior entry illumination. It features selectable wattage (10W, 16W, or 20W) and color temperature (3000K, 4000K, or 5000K), allowing adaptation to a range of exterior design requirements. The fixture includes a built-in photocell for dusk-to-dawn operation and is available in bronze or black finishes to match common architectural palettes.

Typical use cases include mounting at pedestrian entry points, hospitality exteriors, and multifamily building facades. The compact form factor (11.8 x 5.6 x 7 in) and wall-mount design support installation on a variety of exterior wall types. This fixture is UL listed and rated for wet locations.

Core Performance and Output

This wall sconce delivers 1200 to 2400 lumens, depending on the selected wattage. Efficacy is 120 lumens per watt. The fixture is designed to replace 50W metal halide wall packs in low- to mid-mounting height applications. Output is suitable for accenting architectural features, illuminating entryways, and providing pathway visibility near building perimeters.

Optic adjustability allows for changes in beam distribution to suit wall-wash or focused entry lighting needs. Excessive output may occur if installed in confined or narrow corridors at the highest wattage setting. Uniformity may decrease if spacing exceeds typical wall sconce intervals.

Adjustability and Control Options

The fixture supports field-selectable wattage and color temperature, enabling adaptation to project-specific requirements or changes in exterior design. Optic adjustability provides flexibility in beam spread for accent or general illumination. The integrated photocell enables automatic dusk-to-dawn operation without additional controls.

No dimming function is included. All adjustments are made at the fixture during installation or maintenance access.

Longevity and Reliability

Rated for 50,000 hours of operation, this wall sconce is designed for long-term exterior use. The LED driver and light engine are enclosed within a sealed aluminum housing to protect against moisture and debris. The fixture is suitable for continuous operation in outdoor environments.

Routine maintenance is limited to periodic cleaning of the lens and housing. No lamp or ballast replacements are required during the rated life.

Build Quality and Physical Characteristics

The housing is constructed from aluminum alloy with a powder-coated finish in either bronze or black. The fixture is wet location rated and suitable for direct exposure to rain and weather. Weight is 5.25 lbs, supporting secure wall mounting on masonry, concrete, or structural framing.

Dimensions are 11.8 x 5.6 x 7 inches, allowing installation in areas with limited wall space. All hardware is corrosion-resistant for exterior use.

Where This Product Fits Best

This LED wall sconce is intended for exterior architectural applications where controlled, low- to mid-output wall lighting is required. It is commonly installed at pedestrian entries, hospitality building exteriors, and multifamily residential facades. The fixture is also used for decorative wall accenting and corridor wall lighting in outdoor settings.

• architectural wall lighting
• entry lighting
• hospitality exterior lighting
• multifamily exterior lighting
• decorative facade lighting
• corridor wall lighting
• patio lighting
• accent wall lighting

Wet location rating supports use in exposed exterior environments. The fixture is not intended for high-output area lighting or large-scale security applications.

Installation and Long-Term Use

This fixture is designed for direct wall mounting using standard exterior hardware. The compact size and moderate weight allow for single-person installation on most wall types. All wiring is completed within the fixture housing, with 100-277V input compatibility for a range of site electrical systems.

Long-term use is supported by the sealed housing and corrosion-resistant materials. The built-in photocell reduces manual intervention for daily operation. No special tools are required for wattage, color, or optic adjustments during installation or service.

How This Fixture Is Commonly Used

Typical mounting heights range from 7 to 12 feet above grade, depending on the application and desired coverage. Fixtures are spaced to provide continuous or accent illumination along building facades, entryways, or pedestrian corridors. Layouts often use higher wattage settings for wider coverage at main entries and lower settings for accent or pathway lighting.

Spacing and wattage selection should be coordinated to balance uniformity and visual comfort. Higher output settings reduce fixture count but may increase glare in confined areas.

Safety, Certifications, and Warranty

This wall sconce is UL listed and wet location rated. The fixture is eligible for utility rebate programs where applicable. All components are enclosed to prevent water ingress and electrical hazards in outdoor environments.

Standard warranty coverage applies. Refer to documentation for warranty terms and claim procedures.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall sconce?

A: Typical mounting heights are 7 to 12 feet above grade for entry and facade applications.

Q: Can the color temperature and wattage be changed after installation?

A: Yes, both color temperature and wattage are field adjustable at the fixture during installation or maintenance access.

Q: Is this fixture suitable for use in fully exposed outdoor locations?

A: Yes, the fixture is wet location rated and designed for direct exposure to rain and weather.

Q: Does the built-in photocell require additional wiring or controls?

A: No, the photocell is integrated and operates automatically with standard line voltage wiring.

Q: How should fixtures be spaced for uniform wall illumination?

A: Spacing depends on mounting height, wattage setting, and desired light levels. Typical intervals are 8 to 15 feet for continuous coverage.

Application Questions and Clarification

Q: Is this wall sconce appropriate for corridor wall lighting in exterior walkways?

A: Yes, the fixture is commonly used for corridor wall lighting in outdoor environments, provided mounting height and output are matched to the space.

Q: Can this fixture be used for accent wall lighting on decorative facades?

A: Yes, optic and color adjustability support accent wall lighting and architectural highlighting.

Q: Is this product suitable for hospitality exterior lighting at hotels or restaurants?

A: Yes, it is frequently installed for hospitality exterior lighting, including entryways and patio areas.

Q: Does this fixture provide sufficient illumination for multifamily exterior entry points?

A: Yes, the selectable output and color temperature allow adaptation to multifamily exterior entry lighting requirements.