15 Watt LED Indoor Wall Sconce | 1100 Lumens | 3000K / 4000K / 5000K Adjustable | 120V | Silver or Bronze Housing | 2 Pack

Product Overview

This LED wall sconce is a 15-watt, color-selectable fixture designed for architectural wall lighting and exterior entry illumination. It delivers 1100 lumens and operates at 120V, with selectable color temperatures of 3000K, 4000K, or 5000K. The fixture is available in silver or bronze steel housing and is supplied as a 2-pack for consistent deployment across multiple locations.

This product is intended for wall mounting in commercial, hospitality, and multifamily exterior environments. It is commonly used as a replacement for 50-watt metal halide sconces, providing improved efficiency and reduced maintenance in both retrofit and new construction projects.

Core Performance and Output

The fixture outputs 1100 lumens at 15 watts, achieving 73 lumens per watt. It provides a wide 120-degree beam angle for uniform wall and entryway coverage. The color temperature can be set to 3000K, 4000K, or 5000K at installation, supporting a range of architectural and exterior design requirements.

Triac dimming is supported for applications requiring adjustable light levels. At low mounting heights, the output is suitable for accent and entry lighting without excessive glare. For large open areas or high mounting, coverage may be limited due to the moderate lumen output and wide distribution.

Adjustability and Control Options

This wall sconce features field-selectable color temperature, allowing installers to choose between 3000K, 4000K, or 5000K during installation. The fixture supports Triac dimming on compatible 120V circuits, enabling integration with standard wall dimmers for adjustable light levels.

No onboard motion or daylight sensors are included. Color selection is set at installation and not intended for frequent changes. Dimming performance is dependent on the quality of the connected dimmer and circuit compatibility.

Longevity and Reliability

The fixture is rated for 50,000 hours of operation, minimizing maintenance cycles in commercial and exterior environments. The steel frame housing provides durability against physical impact and routine cleaning.

All components are ETL certified. The fixture is designed for consistent performance in typical exterior wall and entryway conditions. Long-term reliability is supported by a power factor greater than 0.9 and total harmonic distortion below 20%.

Build Quality and Physical Characteristics

The housing is constructed from steel and finished in either bronze or silver. The fixture measures 7 inches long, 3 inches wide, and 10 inches high, with a total weight of 2 pounds per unit. The compact form factor supports installation in tight architectural spaces and along corridors.

All mounting hardware is designed for standard wall installation. The fixture is intended for use in dry or damp locations and is not rated for direct water exposure or harsh environments. The steel frame provides impact resistance and maintains appearance over time.

Where This Product Fits Best

This LED wall sconce is suited for architectural and exterior wall lighting in commercial, hospitality, and multifamily settings. It is commonly installed at building entries, along corridors, and in pedestrian areas where moderate output and architectural appearance are required.

• architectural wall lighting
• entry lighting
• hospitality exterior lighting
• multifamily exterior lighting
• decorative facade lighting
• corridor wall lighting
• patio lighting
• accent wall lighting

The fixture is suitable for covered exterior walls, sheltered entries, and corridors. It is not intended for direct exposure to rain or installation in high-abuse or hazardous locations.

Installation and Long-Term Use

The fixture mounts directly to standard wall surfaces using supplied hardware. It operates on 120V circuits and is compatible with most commercial and residential wall boxes. The compact size allows for installation in areas with limited wall space or architectural constraints.

Routine maintenance is limited to periodic cleaning of the lens and housing. Color temperature selection must be set prior to final installation. The steel housing resists minor impacts and maintains finish in typical exterior conditions.

How This Fixture Is Commonly Used

Typical mounting height ranges from 6 to 10 feet above grade, providing effective illumination for entries, walkways, and architectural features. Fixtures are often spaced 8 to 15 feet apart, depending on desired light levels and wall length.

In corridor or multifamily exterior applications, uniform spacing supports consistent appearance and coverage. Selecting higher color temperatures can increase perceived brightness, but may affect architectural aesthetics. Using higher output or closer spacing increases light levels but may introduce glare in confined areas.

Safety, Certifications, and Warranty

This fixture is ETL certified. It is designed for safe operation on 120V circuits and meets standard electrical and safety requirements for commercial and exterior wall lighting.

The product is covered by a manufacturer?s warranty. All components are rated for long-term reliability in typical architectural and exterior environments.

Frequently Asked Questions

Q: What is the maximum mounting height for effective illumination?

A: The fixture is typically installed at heights between 6 and 10 feet. Mounting above 10 feet may reduce effective coverage and uniformity.

Q: Can the color temperature be changed after installation?

A: Color temperature is selectable during installation. Changing it after installation requires access to the fixture and removal from the wall.

Q: Is this fixture suitable for wet locations or direct rain exposure?

A: The fixture is intended for dry or damp locations and should be installed under cover or in sheltered exterior areas. It is not rated for direct water exposure.

Q: What type of dimmer is compatible with this fixture?

A: The fixture supports Triac dimming and is compatible with most standard 120V wall dimmers.

Q: How many fixtures are needed for a 40-foot corridor?

A: For uniform coverage, space fixtures 8 to 15 feet apart. A 40-foot corridor typically requires 3 to 5 fixtures, depending on desired light levels.

Application Questions and Clarification

Q: Is this wall sconce appropriate for hospitality exterior lighting?

A: Yes, the fixture is designed for hospitality exterior lighting and architectural wall applications.

Q: Can this fixture be used for decorative facade lighting?

A: The fixture is suitable for decorative facade lighting, accent wall lighting, and corridor wall applications.

Q: Is this product intended for use in multifamily exterior lighting projects?

A: Yes, multifamily exterior lighting is a primary application for this fixture.

Q: Does this fixture support pedestrian entry lighting requirements?

A: The fixture is appropriate for pedestrian entry lighting and similar exterior wall-mounted applications.