25 Watt LED Bollard Light | 3360 Lumens | 5000K | 100-277V | 26 Inches

Product Overview

This 25 watt LED bollard light delivers 3360 lumens at 5000K, producing a daylight color temperature suited for pathway and perimeter lighting applications. The fixture stands 26 inches tall with a 10.25 inch diameter and weighs 7 pounds. It operates on 100-277V input at 50-60Hz, making it compatible with standard commercial electrical systems.

The housing is die-cast aluminum with a bronze powder-coated finish. This fixture is designed as a direct replacement for 150 watt metal halide bollards, reducing energy consumption while maintaining output appropriate for pedestrian-scale illumination.

Where This Product Fits Best

This bollard is ground-mounted and provides 360-degree beam distribution, making it appropriate for walkways, pathways, courtyards, building perimeters, and landscape areas where low-level, omnidirectional light is needed. The 26-inch height positions the light source at a scale intended for pedestrian visibility rather than area or roadway lighting.

The IP65 rating allows installation in outdoor locations where the fixture will be exposed to rain, irrigation spray, and dust. Facilities replacing aging metal halide bollards along sidewalks, entry paths, or parking lot pedestrian routes will find the output and form factor consistent with that replacement class.

Performance and Functional Considerations

At 134 lumens per watt, this fixture provides efficient light output relative to its power draw. The 70+ CRI is typical for exterior pathway applications where color accuracy is less critical than coverage and visibility. The 5000K color temperature produces a cooler, bluer light that provides strong contrast for pedestrian wayfinding at night.

Rated lifespan is 70,000 hours. Power factor exceeds 0.90 and total harmonic distortion remains below 20%, which supports stable operation on commercial electrical systems without introducing significant line noise.

Installation and Long-Term Use

The fixture mounts directly to the ground using a standard bollard base installation method. At 7 pounds, it is manageable for a single installer during positioning and wiring. The 100-277V input range accommodates most commercial site voltages without requiring a transformer or voltage-specific model selection.

Die-cast aluminum construction with powder coating provides corrosion resistance appropriate for outdoor installations. The IP65 rating means the fixture can tolerate direct water jets and will not be compromised by typical environmental exposure in landscaped or paved areas.

How This Fixture Is Commonly Used

Once installed, this bollard operates as a fixed-output light source with no field-adjustable wattage or color settings. The 360-degree beam pattern distributes light evenly around the fixture, which allows placement along linear pathways or in open landscape zones where surrounding visibility is needed in all directions.

Maintenance is straightforward due to the sealed housing and long-rated lifespan. When replacing metal halide bollards, the reduced wattage and elimination of lamp replacement cycles changes the maintenance profile significantly. Facilities typically install these in rows or grids along walkways, with spacing determined by the desired light uniformity at ground level.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The 5-year warranty covers the fixture against manufacturing defects under normal use conditions.

The IP65 rating confirms the enclosure is dust-tight and protected against low-pressure water jets from any direction. This supports installation in exposed outdoor environments without additional weatherproofing.

Frequently Asked Questions

What voltage does this bollard require?
The fixture operates on 100-277V at 50-60Hz, compatible with most commercial electrical systems.

What does this fixture replace?
It is designed as a replacement for 150 watt metal halide bollards.

Is this bollard rated for outdoor use?
Yes. The IP65 rating allows installation in locations exposed to rain, dust, and irrigation spray.

Is this fixture eligible for utility rebates?
The fixture is listed as rebate eligible. Contact your local utility to confirm program requirements.

What is the warranty coverage?
This bollard carries a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.