24 Watt LED Bollard Light | 3120 Lumens | 3000K to 5000K Adjustable | 100-277V | 42 Inches

Product Overview

This is a 24 watt LED bollard light designed for ground mounting. It produces 3120 lumens at 130 lumens per watt and is intended to replace 125 watt metal halide bollards.

The fixture operates on 100V-277V input and supports 1-10V dimming. It features a 360° beam angle for uniform illumination around the fixture.

The housing is die-cast aluminum with a bronze finish. The fixture measures 42 inches high by 6.3 inches in diameter and weighs 15.8 pounds.

Color temperature is adjustable. The fixture is rated for a 50,000 hour lifespan.

Where This Product Fits Best

This bollard is suited for outdoor pathways, walkways, and perimeter areas where ground-mounted lighting is required. The 360° beam angle provides even coverage in open spaces.

It is appropriate for commercial and industrial sites needing to replace legacy 125 watt metal halide bollards with a lower wattage LED option.

The bronze finish and die-cast aluminum construction are suitable for environments where durability and appearance are important.

Use where 100V-277V power is available and dimming control is needed or preferred.

Performance and Functional Considerations

The fixture delivers 3120 lumens at 24 watts, providing a direct replacement for 125 watt metal halide bollards. The 80+ CRI supports color clarity in outdoor settings.

1-10V dimming allows for integration with compatible dimming systems. The power factor is greater than 0.90 and total harmonic distortion is less than 20%.

The 360° beam angle ensures light is distributed evenly in all directions from the mounting point. The color adjustable feature allows for selection of preferred color temperature during installation.

The fixture operates at 50-60Hz and is designed for long-term use with a 50,000 hour rated lifespan.

Installation and Long-Term Use

This bollard is designed for ground mounting. The die-cast aluminum housing provides resistance to physical impacts and environmental exposure.

The fixture's weight and dimensions should be considered when planning installation, especially for sites with existing mounting infrastructure.

Color temperature can be set during installation to match site requirements. The fixture supports 1-10V dimming for integration with compatible controls.

Routine maintenance is minimized due to the long LED lifespan and durable construction.

How This Fixture Is Commonly Used

After installation, the bollard provides consistent 360° illumination for walkways and outdoor areas. The color adjustable feature allows you to set the preferred color temperature to match other site lighting or meet visibility needs.

Once installed, the fixture operates with minimal attention. Dimming can be managed through a 1-10V system if connected, allowing for light level adjustments as needed for site conditions or schedules.

The die-cast aluminum housing stands up to outdoor use, and the bronze finish maintains appearance over time. The fixture is typically left in place for years without the need for frequent servicing.

Operators can rely on the fixture for uniform light output and stable performance throughout its rated lifespan.

Safety, Certifications, and Warranty

This fixture is UL listed.

The product is rebate eligible.

The housing is die-cast aluminum for durability in outdoor environments.

LED Lighting Supply provides warranty coverage as specified for this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V.

What is the output range?
The fixture produces 3120 lumens at 24 watts.

What mounting method is supported?
This fixture is designed for ground mounting.

What certifications does this fixture carry?
This fixture is UL listed and rebate eligible.

What is the warranty coverage?
LED Lighting Supply provides warranty coverage for this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.